View Full Version : Techniques
- Token hub bearing replacement
- World Oil Production to Peak in 2013
- fenders...
- Chain advice for the following setup:
- Used or NOS Campy Mirage/Veloce/Daytona 36 hole Rear hub needed
- is there a "bike hardware assortment?"
- The dog from hell story I need to give them more credit
- Re: On topic at last! Treatment of prisoners!
- Re: BEYOND ERD !
- Fashion vs. Function
- Re: BEYOND ERD !
- Re: BEYOND ERD !
- Re: Ergo G Springs
- Re: On topic at last! Treatment of prisoners!
- Re: Ergo G Springs
- New shoes and Campy cleats - question:
- QUICK SALE !!!!!!!!!!
- triplizing Derosa
- Disc brake problems
- Chain connection pin following the inner chain link - why?
- Re: Powell's action predictable, was Re: Colin Powell Tells It LikeIt Is
- Historical questions on welding/fillet brazing/lugging steel frames
- Re: Colin Powell Tells It Like It Is
- Re: Colin Powell Tells It Like It Is
- Adjacent cassette cog tooth delta - what's the max?
- Seatpost diameter for older RockHopper?
- why threaded 1 1/8th??
- Bottom Bracket Broken
- Re: Colin Powell Tells It Like It Is
- Schwalbe lightweight balloon tubes
- Re: Colin Powell Tells It Like It Is
- Smooth-rolling non-round wheels?
- dura-ace shifter ate cable, howto recover?!
- ATAC vs Crank Bros cleat compatibility?
- The bicycle frame as a spring?
- Andre Jute Great Lie From The Past - May 27
- Re: Colin Powell Tells It Like It Is
- WINE COUNTRY SAFARI
- World Oil Production to Peak in 2013
- Magic wheel, Gauswheel -opinions wanted
- cost of spokes, 3 for 10 pence
- Dura-Ace vs Ultegra cassettes - an experiment...
- Does a Rohloff Speedhub make you fitter? Notes about sprocket ratiochoice.
- 7-speed freewheel to 7-speed cassette?
- Pedal powered hot dog launcher
- Tire Shelf Life
- Andre Jute Great Lie From The Past - May 31
- The Andre Jute FAQ v1.1 - May 31
- Wheel spins on steep uphill trail: tire or technique?
- A good mirror: Zefal's Dooback
- Recycling bicycles
- Lezyne Road Drive vs Innovations 2nd Wind Pump
- Is Nashbar done?
- How do I avoid saddle sores.
- Recumbents: extreme, unsuitable for purpose, dangerous, dull,overpriced
- How does PSI varying with rider's weight?
- old CCM
- question about Kool Stop Dual Compound Mountain Pads on my Road Bike
- CYCLE ROOF RACK ?
- Replacement parts for SPD pedals
- adjusting stem height
- slimed tires?
- How thick are "regular" innertubes?
- Campy Mirage Compact Crank
- Shimano cogs on Campy spline?
- Q: Wellgo SPD pedel clones
- MAXI BB confusion
- triple vs double front crank.
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- Andre Jute Great Lie From The Past - 3 June
- Re: Head Bearing Damage
- A: Finlux Safety+ 32" putkitv
- Flying Pigeon - which size pedals?
- And the sun shone today
- Seeking Spokes
- Catch the Northwest 200
- Campy Chorus 10sp Chain question
- BMX pegs on a regular rear axle?
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- SPD pedals Release angle
- Tagua nuts....too much ganja over in hobbitville ?
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- pedaling on the arches
- Slime Pro
- AW 3-speed hub
- Age of the automobile is kaput!
- Andre Jute Great Lie From The Past - June 7
- Andre Jute FAQ v1.1 - 7 June
- Removing old rim glue
- Rim cracking solution
- Bicycle efficiency testing
- Handmade carbon-rimmed wheelset interim report
- opinions on bicycle rack style?
- Peter "Hypertension" Howard's dumbass display No. 1
- Poor "Hypertension" Howard parrots someone else's error, claimscredit
- News flash from 1891
- Does Shimano still make an 8 speed cassette?
- Peter "Hypertension" Howard is a liar and a thief and a false accuser
- Those were the days . . .
- The lying coward Peter "Hypertension" Howard threatens more futilesputtering
- Good frame pump?????
- Some thoughts on Usenet from Ed Dolan
- Valve stem break
- A Review of the Dangers and Evils of Bicycling
- Some details about wood rims from 1904
- rear wheel build---Velocity OC or Mavic Open Pro rim?
- Re: Put a lid on it...
- Re: Put a lid on it...
- Re: Put a lid on it...
- Tire Recommendation
- de-indexing shifting
- Brake Modulator Invention
- Advice regarding Octalink BB/Crank
- Anthrotech & HP-Velotechnik Scorpion trike review
- AUTOTRIKE by Andre Jute
- JUNE KILLFILE REVIEW
- New Record cranks on old Edco BB
- Re: Put a lid on it...
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- Andre Jute Great Lie From The Past - 10 June
- Re: THE LOGIC OF TRIKES an outsider's viewpoint by Andre Jute
- Is there such a thing as an ideal trike?
- OT switched from motzarella free news server
- CABLE DISCONNECTS WITH INDEX SHIFTERS ?
- I have the intention to ride on my rear cracked wheel
- Powered bike trailer?
- Mike Jacoubowsky in Wall St. Journal
- Bike shops, bike magazines and bike customers
- "Australia's greatest contribution to hipsterdom"
- Ultegra Front Derailleur Setup (height & angle) with Compact Crankset
- Alternate to 1980's U-brakes?
- Getting Canti Brakes Even?
- bicycle trailer by "InStep"?
- replacing base tape with latex
- How suitable is a 12 paired spoke wheel.
- Wisdom of the Snob
- Mavic responds to wheel collapse article
- The "BauBike"
- Some early speed records
- Lubricating a Sachs Aris freewheel
- For Frank Krygowski's helmet files
- Re: Mavic
- Bottecchia Bikes online
- Mavic computer help
- Secrets of the Ohio League of American Wheelmen revealed
- Tyres and patterns.
- Andre Jute Great Lie From The Past - 14 June
- another thought on roof bike racks
- standard 110 BCD ring on a campagnolo 110 crank?
- Can't file new inner tube
- Anything interesting happen on RBT today?
- shifter and canti brake
- Curious bicycle reflector incident
- First clipless pedal--for 1883 tricycles
- Nut for securing a solid axle
- Bearings on shimano dynamo hubs
- Most aero proficient wheel, front or rear?
- View the "coming attractions"
- Shimano 9-speed road shifter w/mountain bike rear der?
- Campagnolo 11 vs 10 speed, new bike
- Push Bike
- What BB tool do I need?
- Adjusting to an Upright Saddle?
- Question/Suggestion
- Re: Mavic
- Re: Mavic
- Re: Mavic
- Re: Mavic
- Re: Mavic
- Re: Big Apples
- Re: Mavic
- Re: Big Apples
- Shame they banned the funny bikes
- Re: Converting Shimano Braided Brake Cables?
- OT - News Servers
- Re: Head Bearing Damage
- Re: Head Bearing Damage
- Looking for cheap interval camera for bike use
- The Cylists' Substitute List
- jobstian fretting bull****
- There Goes the Neighborhood
- Lubrication recommendations
- The Ginger Cat took its Gingerbread Hobbit for a ride across theprairie on the little red hobbit-bobbit
- Help with Raleigh bicycle
- For Chalo
- Securing Bolt-Ons?
- small o/a torch preferences?
- Size 56 IRO Mark V fixie with 172.5mm cranks?
- Busted Carbon Website
- "Send a message to the statehouse to restrict cycling on our roads"
- Re: Mavic
- Powered pump
- changing the fork/headset on Trek oclv?
- Basic Question
- Offering Champion Cleopatra Midnight etc III a little red hobbitbobbit
- Shimano 9 and 10 Casette/Hub Compatibility
- Spoke Tensiomters
- Seat has a "leak"
- tool crossover between bike and auto/home and need a new BB
- KILLFILE STARTER LIST SAVES WASTED TIME
- Chain and shaft drive efficiency
- Campagnolo experts what is this?
- Rake and highwheelers
- Oh No, Rust...
- Completely OT but .....
- hmm, y'think this might have been my problem?
- UCI Announces Intentions
- Re: Mavic
- broken spoke problems
- Re: Tom Sherman - recumbent expert extradinaire
- Update on the Bottecchia bike
- wondering about bottom brackets (not immediately crucial)
- Old Fashioned Look of Metal Fenders, Partially Solved, I think. . .
- Components you don't need to spend big bucks on
- Re: Race Face Cranks
- Re: Early safety bicycle accidents
- Unkindest paragraph in bike show review
- Re: Is Drillium Cool Again?
- Re: Is Drillium Cool Again?
- Re: Early safety bicycle accidents
- Adjustable Stems, REI, Titanium Plates
- Re: Is Drillium Cool Again?
- Re: Want 2 Convert 1 speed adult trike to multi-gears
- Re: Is Drillium Cool Again?
- Re: Is Drillium Cool Again?
- Oversize Innertubes
- Charger for batteries
- Re: Want 2 Convert 1 speed adult trike to multi-gears
- Reynolds tube sets in UK
- Re: Any one make straight arm cranks?
- Vintage Bicycle Parts
- Re: Any one make straight arm cranks?
- Re: Any one make straight arm cranks?
- Re: Is Drillium Cool Again?
- Source of air leak
- RBT 1896-style
- Re: Early safety bicycle accidents
- Re: For Frank Krygowski's bicycle safety file
- 1/8 & 3/32. BMX, SingleSpeed.
- LightLane Virtual Bike Path to Become a Reality
- Re: Race Face Cranks
- Fragile presta valves
- DIY Bike Lane
- Using a front caliper on a recessed rear
- Re: Is Drillium Cool Again?
- Old Fashioned Look of Fenders, Chopped and Rotated
- Tire versus tyre, the definitive thread from 1896
- New Invention
- Nokon cable system. Hype or ??
vBulletin® v3.6.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.