PDA

View Full Version : Re: FS: Cinelli Handlebars & Stem


D. Keith Arbuckle
August 19th 03, 06:34 PM
These have been sold.
-Keith

"Dick Creager" > wrote in message
...
> D. Keith Arbuck wrote:
> > I have a Cinelli bar and stem that doesn't fit me that I would like to
> > sell. Here are the specs:
> > o Cinelli XA quill stem for threaded fork, 135mm extension in very
> > good shape. It has some marks on the quill that are below the
> > minimum insertion line. There isn't even any rust in the bolt heads
> > that is common.
> > o Cinelli Top 64 bars, 44mm width (ctc) in good shape. These are the
> > bars that have holes drilled for the brake cables -- no grooves. There
> > are a few small marks on the center section and on the ends of the
bars
> > where the brake levers where clamped -- but no deep zigzag grooves
> > caused by installed the brake levers.
> > There isn't any indication on the bar or stem if these are 26.0 or
> > 26.4 clamp diameter, but according to my caliper measurement, these
> > are 26.4mm.
> > I do have a couple of digital images available that I took yesterday
> > that I can send if interested.
> > I'd like to get $35 for both and I'll cover the shipping in the lower
> > 48. -Keith
>
>
> Hi Keith, I am interested in the set. Are they still available and do
> you have pictures? Thanks, Dick
>
>
>
> --
> >--------------------------<
> Posted via cyclingforums.com
> http://www.cyclingforums.com
>

Google

Home - Home - Home - Home - Home