B. Sanders
August 11th 03, 09:12 PM
"Tom Parker" > wrote in message
...
>
> A few months ago I posted about the idea of steam cleaning
> the chain, cassette, rings, etc. I decided to go ahead
> and give it a try, so I bought a Sear's steam cleaner on
> ebay, and today I tried it out on the bike. In a word,
> results were very disappointing.
>
> I had to hold the steam jet extremely close to get
> any effect and this resulted in a narrow 1/16" band
> of cleaning. So, I had to go link by link, and work on
> each of the four sides. Needless to say, this was very
> time-consuming and required detailed work. Worse, there
> was still a layer of slime even after steam cleaning.
>
> I then tried spraying first with de-greaser. This had
> an immediate effect, as the gunk started dripping off.
> But follow-up steam cleaning did little good. Only wiping
> with a cloth would really remove the residue.
>
> So, my hopes for a quick easy way to clean the transmission
> were dashed. Steam cleaning is not the answer, for me.
> I'm going back to the old-fashioned way of de-greaser,
> soap and water, and brushes. For the chain, I might try
> the alternative suggestion of removing and soaking in
> a solvent.
>
> The only bright note was that afterwards I discovered a
> 20-year old can of Boraxo powdered hand cleaner, which
> did a very effective job of cleaning my hands!
Boraxo! That's great stuff! It is not gentle to your hands; but there's
nothing more effective that I've found. The gritty powder helps scrub-off
the dirt and grease. I used to find Boraxo in public washrooms, now I
rarely encounter it. Too bad. I hate the flowery liquid stuff they use
nowadays. The smell is awful!
-Barry
...
>
> A few months ago I posted about the idea of steam cleaning
> the chain, cassette, rings, etc. I decided to go ahead
> and give it a try, so I bought a Sear's steam cleaner on
> ebay, and today I tried it out on the bike. In a word,
> results were very disappointing.
>
> I had to hold the steam jet extremely close to get
> any effect and this resulted in a narrow 1/16" band
> of cleaning. So, I had to go link by link, and work on
> each of the four sides. Needless to say, this was very
> time-consuming and required detailed work. Worse, there
> was still a layer of slime even after steam cleaning.
>
> I then tried spraying first with de-greaser. This had
> an immediate effect, as the gunk started dripping off.
> But follow-up steam cleaning did little good. Only wiping
> with a cloth would really remove the residue.
>
> So, my hopes for a quick easy way to clean the transmission
> were dashed. Steam cleaning is not the answer, for me.
> I'm going back to the old-fashioned way of de-greaser,
> soap and water, and brushes. For the chain, I might try
> the alternative suggestion of removing and soaking in
> a solvent.
>
> The only bright note was that afterwards I discovered a
> 20-year old can of Boraxo powdered hand cleaner, which
> did a very effective job of cleaning my hands!
Boraxo! That's great stuff! It is not gentle to your hands; but there's
nothing more effective that I've found. The gritty powder helps scrub-off
the dirt and grease. I used to find Boraxo in public washrooms, now I
rarely encounter it. Too bad. I hate the flowery liquid stuff they use
nowadays. The smell is awful!
-Barry