My New Freestyle, help.

[fluffinator007]

I'm looking for a new freestyle unicycle in the $100 - $150 range. I
just broke my last, I'm looking at the Nimbus II 20'' freestyle unicycle
at unicycle.com

Chrome-plated steel frame with squared top for one-foot skills
Unicycle.com wide CrMO hardened steel hub and 48 stainless-steel
spokes
Double-walled alloy rim with nipple eyelets
Hookworm 20 x 1.95 freestyle tire, rated to 120 psi
Velo padded, contoured saddle with lift handle
400-mm chromed steel seat post
Rubber 9/16 pedals (easy on hard wood flooring!)
Quick-release handle

Those are the specs and in exception to the rubber pedals it sounds
pretty decent for $144. If you have any negative input about this
unicycle or have better suggestions please dont hesitate to let me
know.


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410

[john_childs]

What broke on your freestyle uni? If it was the hub then make sure you
get a unicycle with either the Suzue or the new unicycle.com CroMo
hub.

That Nimbus II unicycle has good parts, including the unicycle.com CroMo
hub. However, I don't like that frame for freestyle stuff. The crown
is too far away from the tire and because of the shape of the crown it's
not as comfortable to put your foot up there as other freestyle
unicycles that have a flatter crown.

A better freestyle unicycle would be something will all the parts from
the Nimbus II but swap the frame for a 'Semcycle XL Long Neck'
(http://www.unicycle.com/shopping/shopexd.asp?id=696). Here is the Sem
Long Neck frame built up on a unicycle: 'fancy Sem Long Neck unicycle'
(http://www.unicycle.com/shopping/shopexd.asp?id=697). Notice how the
crown is close to the tire. That makes one foot skills easier. That's
a nice freestyle frame.

Swapping to the Sem Long Neck frame would add about $25 to the cost of
the unicycle, but you'd get a better suited freestyle uni out of the
deal.


--
john_childs - Guinness Mojo

john_childs (at) hotmail (dot) com
Gallery: '' (http://www.unicyclist.com/gallery/john_childs)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/29410

[jagur]

how about the Torker Unistar LX 20-inch?
[image:
http://www.unicycle.com/images/catalog/freestyle/tn_UNTOLX20.jpg]
its only $96 dollars!

or the 'ultimate uni.com flat crowned loop hole'
(http://www.unicycle.com/Shopping/shopexd.asp?id=613) just flip one of
the cranks around and presto! you get a flat crowned freestyle uni for
super cheap! the seat on it sucks but at that price you could just use
your old one or buy a better one and still be under you budget.

uni.com somtimes has "curious" prices and it totaly pays to poke around
for the best deal,somtimes even in the weirdest catagories?

for my freestyle uni,i bought a Torker XL,a Sem long neck and a 22.2
seat post to fit it and tranfered all the Torker parts and still came
out better than if i had bought any fully built up uni that had the Sem
long neck frame on it.

or better yet,just but a Torker Unistar LX 20-inch from a bike shop and
pay no shipping.









--
jagur - Random Unicyclist

---------------------------------------------------
-Forget_Your_Life-

------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/29410

[fluffinator007]

yah, but if i bought the torker (96) and the frame (65) and the seat
post (15) it would add up to about $176....and thats without
shipping/handling. Do you think it would be worth it? I am guessing
after shipping it would boil down to about 200-215. Plus, for that
price i might as well get a kris holm freestyle or something


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410

[john_childs]

What type of freestyle riding are you planning on doing? It is hard to
suggest a unicycle without knowing how it is going to be used.

I think the Semcycle Long Neck is the best of the lower cost freestyle
frames. The frame is designed specifically for freestyle. The crown is
nice and close to the tire. The long neck means it fits an adult
better. The long neck moves the seat post clamp up higher where it is
more out of the way. It is very nice to have the seat post clamp out of
the way when doing skills like seat on side, hands free seat out front,
and other skills where you legs will rub on the neck of the frame.

The new Torkers are also very nice. For $96 it is hard to beat the new
Torker LX. The hub isn't as strong as the Suzue or unicycle.com ChroMo
hub, but it is strong enough for freestyle if you don't do trials with
it. The crown is higher than the Sem Long Neck, but that isn't too much
of a problem until you start getting into the real advanced freestyle
skills. The frame is heavier than the Sem Long Neck. The seat post
clamp may get in the way, but it's somewhat low profile. If you're a
taller rider it is more difficult to get longer 25.4 mm seatposts. Most
other freestyle frames use a 22.2 mm seatpost and there is more of a
selection of longer freestyle seatposts in the 22.2 mm size than in the
25.4 mm size.


--
john_childs - Guinness Mojo

john_childs (at) hotmail (dot) com
Gallery: '' (http://www.unicyclist.com/gallery/john_childs)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/29410

[fluffinator007]

At the current moments in my life I am not extremely advanced in the
area of freestyle, If i were to get just the Nimbus II or the Torker LX
what would you suggest, if you knew that i would probobly get a sem long
neck frame in the future to add onto the unicycle I would end up
purchasing. So short term stock Torker LX or Nimbus II? Knowing that
in the future I may add a better freestyle frame. Not necessarily the
semcycle long neck but a better one none the less. And also knowing
that I am not extremely advanced in any sense.


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410

[fluffinator007]

One pro i just thought of for hte Nimbus is that i often have problem of
my foot rubbing against my wheel when trying to do one foot skills. The
Nimbus's high clearance would probobly solve this, but it also might be
a disadvantage seeing as how i have not used one like it and am slightly
inexperienced in freestyle.


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410

[jagur]

fluffinator007 wrote:
> *yah, but if i bought the torker (96) and the frame (65) and the seat
> post (15) it would add up to about $176....and thats without
> shipping/handling *
i didnt say you sould do that,i said thats what i did.i also said try to
buy it from a bike shop like your 24" Torker and pay no shipping

oh and you still havent explained how you broke your freestyle?


--
jagur - Random Unicyclist

---------------------------------------------------
-Forget_Your_Life-

------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/29410

[john_childs]

If you're trying to save money my little motto is "splurge on the wheel
and skimp on the frame". It's more important to have a good solid wheel
than a super fancy expensive frame. Fancy frames have their place, but
they're not as important as a good solid wheel.

Using that motto the Nimbus II is the better option. Later on you can
switch to the Sem Long Neck frame when you start doing skills where the
Nimbus II frame becomes a hindrance.

I have always used frames with a low crown for freestyle. You learn to
put your foot on the crown in a way so that you don't rub the tire when
you don't want to. If you're used to a higher crown it may take some
time to learn to adapt to the lower crown, but you'll learn to adapt.


--
john_childs - Guinness Mojo

john_childs (at) hotmail (dot) com
Gallery: '' (http://www.unicyclist.com/gallery/john_childs)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/29410

[fluffinator007]

I think I am going to go with the Nimbus II because of the wheel set
seeming better and then if i feel the need I will get another frame/seat
post. Although as soon as i get this freestyle I'm going to want a new
seat post clamp.

As for how i broke my last freestyle, well first problem was that it was
extremely crappy. I'm not extremely sure what happened but I know its
not worth the money to fix or replace the wheel set with the same frame.
Somehow i broke the crank/hub set or something. Like if I in any way
change the direction of force in pedaling, even the slightest bit,
theres like a 3 inch movement of the crank before it catches the wheel
and turns it. So all the time in pedaling and mounting etc. I'll pedal
and nothing will move it's very akward and hard to explain....Do you get
it? If not I'll try to explain again. And if you think it can be fixed
I'd like to do it bu still get a new freestyle. It has one of those
crappy plastic spoke set things, and lollipop bearings, it was my first
unicycle ever.

As for bike shops. I have no bike shops that carry even partially
decent unicycles. The only place that carries them is bike shack and
they only have a very crappy crappy brand with a high price tag of like
$115. I think its like Avenir or something. I think it's over priced
for what it look like, I could be wrong.


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410

[johnfoss]

fluffinator007 wrote:
> *Like if I in any way change the direction of force in pedaling, even
> the slightest bit, theres like a 3 inch movement of the crank before
> it catches the wheel and turns it.*
Sounds like a cheapie mag wheel uni. Still better than the one I
originally learned on, which also has that "coasting" feature now.

Pretty much any unicycle at this point will be an improvement. I agree
with John Childs that if you want it for tricks, get a crown that's down
close to the wheel. Also make sure it's a flat crown, not a unicrown
like what probably came with your broken mag. This is easier for putting
your foot on.

If your plans are more for general riding, you don't need to be so
specific. I don't know what the Avenir unicycle is so I can't recommend
that one. The various options people have already mentioned are all
good.

There used to be a big unicycle club in Chariton, 60 miles south of Des
Moines, and I don't know how far west of you. I don't have any current
contact information for the folks there, but you could try looking them
up. If they're no longer active, there are probably lots of unicycles
(good ones--Miyatas!) you could buy cheap! Look for the Edwards and
Rubel families in Chariton.


--
johnfoss - IUF Director

John Foss, the Uni-Cyclone
"jfoss" at "unicycling.com"
www.unicycling.com

"I ain't goin' to no mall." — my nephew Austin Miller, on being invited
to join his sister and mom at the mall on Saturday Dec. 13

------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/29410

[fluffinator007]

Thanks, ill look into that. If I fail to be able to get a hold of them
or if they cant help me in this department I'll probobly go with the
Nimbus. It seems like it will last a long while and Besides a minor
frame issue its good all around, and the frame can be exchanged if ever
really desired. So I'll probobly end up doing that, unless someone
comes up with another negative or a better option in the near future.
Thanks for everyone who helped me, and also thanks to John Foss for
unicycling.org which is most definitly a big helper when i first began
and now as well.


--
fluffinator007
------------------------------------------------------------------------
fluffinator007's Profile: http://www.unicyclist.com/profile/4757
View this thread: http://www.unicyclist.com/thread/29410