|
|
|
August 18th 04 07:25 PM
by Craig
|
2 |
448 |
|
|
change to drop bars by
Boatman
I have a Rayleigh C40 which has "hybrid" type handlebars. I'd like to
consider the possibility of changing them to a roadie drop style. This will
probably...
|
|
7 |
255 |
|
|
|
|
4 |
743 |
|
|
instability and speed wobble by
bfd
This seems like a reasonable explanation:
"alfee Design has identified a cause of speed wobble (a.k.a. shimmy) and
instability that can be prevented. Speed...
|
|
7 |
525 |
|
|
Soldering iron to patch tubes? by
Phil Lee
The idea is just as it seems... melt the rubber to seal the hole.
Anyone done this before? Success?
--
Phil, Squid-in-Training
|
|
2 |
460 |
|
|
C-dale 3.0 frame by
Roland2k
I have an old C-dale 3.0 frame. It's in relatively good shape, but I
am worried about some paint bubbling up around the cable stays along
the top tube. I...
|
|
6 |
219 |
|
|
Orbea Orca and Front derailleur hanger by
Biff Stephens
Hello,
My girlfriend has an Orbea Orca and it has a clamp on derailleur hanger.
What we have just noticed is the bike shop put a Dura Ace hanger on the
bike....
|
|
6 |
998 |
|
|
Plug for 1" Ritchey WCS Carbon Road Forks?? by
Eurastus
I purchased a set of 1" Ritchey WCS Carbon Road forks with carbon steerer.
Nice and light...look to be good construction. I'd sure like to get them
installed...
|
|
2 |
773 |
|
|
|
August 18th 04 09:03 AM
by lasr
|
5 |
771 |
|
|
|
|
23 |
1,648 |
|
|
Sette? by
badmojo22
Hey all!
I stumbled upon pricepoint.com and a brand called Sette... what sette
was offering was a combo shoe/pedal package with a price that really
couldn't...
|
|
7 |
533 |
|
|
Frame geometery by
Colin Marshall
Hi,
I have a frame with a 72 seat angle 57.5 top tube and 55(c-c) seat tube with
a 120 stem.
It has been suggested that a 73 seat tube with a 56.5 top tube...
|
|
3 |
205 |
|
|
Down tube stops by
Bob Wheeler
I'm rebuilding three old bikes from the 70's with modern components. The
only problem is the lack of brazed on down tube cable stops. Does anyone
know where I...
|
|
3 |
567 |
|
|
|
August 18th 04 02:18 AM
by Collin
|
32 |
1,489 |
|
|
Bike Store in Claremont, Calif? by
joel roth
My son will be attending college in Claremont, Calif. Can anyone
recommend a bike shop in that town? He's looking to buy a bike, rather
than ride his bike out...
|
|
5 |
426 |
|
|
|
|
36 |
994 |
|
|
Best BB for Campy Racing T by
Michael L.
Questions for all you campagnolo experts:
I have a 9 speed (circa 2001-2002, not sure) campagnolo racing-T
crankset mounted on a Campy ACH 111mm bottom...
|
|
8 |
602 |
|
|
STI shifter indexing, sometimes by
Mighty A
I have an old RSX triple drivetrain and the rear derailleur shifter
will, usually when shifting up, not shift. If I shift the lever a few
times the derailleur...
( 1 2)
|
|
12 |
678 |
|
|
update- bearing cone adjustment by
Gregory McGuire
Well I have to thank those that responded to a previous post about bearing
cone adjustment.
I had regreased my bearings and the rim had very slight play. And I...
|
August 17th 04 10:56 PM
by Robert
|
4 |
662 |
|
|
what cleat for Time Sprint pedals? by
Ed Cory
A friend bought a used bike with Time Sprint pedals
and needs cleats. My surfing found that the
Sprint uses the same cleat as Time's Sport model.
What cleat...
( 1 2)
|
|
11 |
1,544 |