Based on other people's observations that it reduces cramping, I got a jar of the stuff. Label doesn't, however, recommend a dilution strength... only "One...

Want to build up a bike with the maximum range of usefulness, but with the tradeoffs biased towards paved surface riding. "Paved surface" and not "road" bc I...

Many years ago, I used to see ads for what seemed tb basically a poncho cut for use on a bike. Little strings to hook it on the handlebars and so-forth. In...

Got two mountain bikes: FS and HT. Both designed for 26" wheels. Got fat tires on the FS (WTB Mutano Raptors) and slicks on the hard tail (Performance?...

Anybody got some ins and outs on clothes changing? I've been changing in the bathroom about 15' from my desk for the past year or so. Works for me.... But...

I've got a rear wheel that a shop built up for me. It's on a Rohloff hub (i.e. short spokes) and they used a cutting/rolling machine to shorten generic spokes...

Per Mike Rocket J Squirrel: Need an inexpensive solution for chilled hangy-down parts of my ears when riding in freezing temps. How about a standalone...

I'm thinking about building up a LHT with parts I have from other bikes. The 62cm (largest) size looks kind of like my 24" 1983 StumpJumper - which fits me ok...

Is it even thinkable to shorten a frame by moving the steering tube back? I've got this frame - with a 26" (as measured by Yours Truly) top tube:...

I'm pretty sure my hip width is towards the right side of the bell curve. The distance between my sit bones (as measured center-to-center on the indents they...

This is my third try at posting this. Dunno what's going on, but the previous two don't seem tb making...

Original StumpJumper, front wheel. Pried off the bearing covers. There's plenty grease in there, but it's very thick and gummy. This thing is what... 20+...

My front rotor wobbles a few mm - just enough so that it either squeaks intermittently, or there's too much lever travel - depending on the pad clearance. I...

In yet another attempt to mitigate the creakfest that's going on in my BB, I'm going to try setting the components in blue LocTite instead of grease and/or...

Never heard of it. Does anybody actually have one of these things? http://www.cruzbike.com/ Been flirting with the idea of a 'bent for a number of years...

I ride my utility (i.e. POS-Who'd-Want-To-Steal-It) bike to the gym a few nights per week. Total riding-in-the-dark time 20-40 minutes, depending on how early...

Does this pic show a two-cross lacing pattern or a three-cross? http://tinyurl.com/32ce8x i.e. does the itty-bitty crossover at the flange count? --...

Sturmey guy says most people put the reaction bar of their Dynohub on the "opposite side from the drive side". Ok... but why should it matter. Cable run...

What light bulbs/LED emitters are you powering with your Sturmey-Archer Dynohub? Front? Back? I did the thing with the bridge rectifier to convert it's...

Here's what I see whenever I'm riding and I look down: http://tinyurl.com/redxsu i.e. When my feet find their place width-wise, they're hanging about an inch...