mavic hub spacers for 10speed cassette
Hey All.
I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh |
mavic hub spacers for 10speed cassette
Josh wrote: Hey All. I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh Sounds like the return spring of the rear der is getting tired. Der hanger straight? Der come down to smallest cog w/o inner wire attached? If it does, new cable/housing. If it doesn't w/o the inner wire attached, put a .5mm chainring spacer between the der bolt and the frame to move it out a wee bit allowing the spring to be 'tighter' bringing chain to smallest cog. |
mavic hub spacers for 10speed cassette
Everything is actually brand new, which I also suppose could be a problem.
Maybe it just all needs to settle in a bit. I'll try a spacer on the derailleur bolt. thanks for the help -j "Qui si parla Campagnolo" wrote in message oups.com... Josh wrote: Hey All. I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh Sounds like the return spring of the rear der is getting tired. Der hanger straight? Der come down to smallest cog w/o inner wire attached? If it does, new cable/housing. If it doesn't w/o the inner wire attached, put a .5mm chainring spacer between the der bolt and the frame to move it out a wee bit allowing the spring to be 'tighter' bringing chain to smallest cog. |
All times are GMT +1. The time now is 10:44 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com