CycleBanter.com

CycleBanter.com (http://www.cyclebanter.com/index.php)
-   Techniques (http://www.cyclebanter.com/forumdisplay.php?f=8)
-   -   Look KG461 Ergopost 2 compatibility (http://www.cyclebanter.com/showthread.php?t=155020)

Bill January 29th 07 11:55 PM

Look KG461 Ergopost 2 compatibility
 
I'm putting together a NOS KG461. It uses an internal wedge clamp for the
seatpost. Anyone know if the Look Ergopost 2 will work or will the wedge
crush the carbon?
Bill



Qui si parla Campagnolo January 31st 07 03:05 PM

Look KG461 Ergopost 2 compatibility
 
On Jan 29, 3:55 pm, "Bill" wrote:
I'm putting together a NOS KG461. It uses an internal wedge clamp for the
seatpost. Anyone know if the Look Ergopost 2 will work or will the wedge
crush the carbon?
Bill


I have a hard time believing LOOK would make something not applicable
to their own frameset(both in existence at the same time) BUT A wedge
like that is generally a bad idea.


Bill February 1st 07 05:01 PM

Look KG461 Ergopost 2 compatibility
 
"Bill" wrote in message
...
I'm putting together a NOS KG461. It uses an internal wedge clamp for the
seatpost. Anyone know if the Look Ergopost 2 will work or will the wedge
crush the carbon?
Bill

For the archives. Heard from Look:
The ergopost 2 will work just fine. In addition to greasing the bolt

threads, make sure you put a little grease on the surfaces of the wedge so

that they will not bind and cause you to over-tighten the bolt. The correct

torque for this bolt is 12-15 NM.




All times are GMT +1. The time now is 11:00 PM.
Home - Home - Home - Home - Home

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com