CycleBanter.com

CycleBanter.com (http://www.cyclebanter.com/index.php)
-   Techniques (http://www.cyclebanter.com/forumdisplay.php?f=8)
-   -   Fisher frame size from serial number? (http://www.cyclebanter.com/showthread.php?t=16330)

Kurd September 4th 03 07:01 PM

Fisher frame size from serial number?
 
Fisher does indeed measure center-top
http://www.fisherbikes.com/bikes/siz...is&bike=BigSur

Ya got your money from him, right?


-kurd

"Geoff" wrote in message
...
I recently sold a Gary Fisher frame on Ebay and the buyer is disputing
the frame size as I listed it (I believe he is measuring the frame
center-center instead of center-top). The only proof I have that the
frame size is indeed the size I listed is a bill of sale with the serial
number of the frame (although the bill of sale does indicate the size I
stated in the auction). Does anyone know if I can demonstrate the size
of the frame from the serial number?

Thanks,

Geoff




Geoff September 4th 03 07:13 PM

Fisher frame size from serial number?
 
I recently sold a Gary Fisher frame on Ebay and the buyer is disputing
the frame size as I listed it (I believe he is measuring the frame
center-center instead of center-top). The only proof I have that the
frame size is indeed the size I listed is a bill of sale with the serial
number of the frame (although the bill of sale does indicate the size I
stated in the auction). Does anyone know if I can demonstrate the size
of the frame from the serial number?

Thanks,

Geoff


Geoff September 4th 03 10:37 PM

Fisher frame size from serial number?
 
DiabloScott wrote:
Large is the size 19" c-t and Medium is 17.5" - unless that bike has a
3" diameter top tube there's no way the difference between c-c and c-t
will explain it.

http://www.fisherbikes.com/bikes/siz...is&bike=Marlin

You didn't say what the serial number is - some manufacturers include
the frame size in the serial number... worth a check. Also you could go
to your local Fisher dealer and take some measurements of both sizes of
frame. I think you're on good footing with the sales receipt, but this
guy could make a stink on your eBay seller's rating.



--
Check out my bike blog!

http://diabloscott.blogspot.com


Thanks for your input. I considered going to my local Fisher dealer and
taking some measurements, not sure what the proper etiquette is though.

The seat tube does extend some distance above the top tube; maybe half
the top tube diameter + the seat tube extension would explain the 1.5"
difference.

I did look for any obvious relationship between the serial number and
the frame size and didn't notice any.

I emailed Fisher regarding the serial number and have yet to hear a
response. I'm not sure how responsive Fisher is, but hopefully I'll get
an answer either way.


S. Anderson September 4th 03 11:00 PM

Fisher frame size from serial number?
 
"Geoff" wrote in message
...

Thanks for your input. I considered going to my local Fisher dealer and
taking some measurements, not sure what the proper etiquette is though.

The seat tube does extend some distance above the top tube; maybe half
the top tube diameter + the seat tube extension would explain the 1.5"
difference.

I did look for any obvious relationship between the serial number and
the frame size and didn't notice any.

I emailed Fisher regarding the serial number and have yet to hear a
response. I'm not sure how responsive Fisher is, but hopefully I'll get
an answer either way.


You can go to a shop and measure merrily. They likely don't care..you can
simply say you're checking your measurements based on your old frame. No
big deal. From my days with Trek and most manufacturers, there was no
correlation between serial number and frame size. However, they will be
able to work back from the serial number to find the frame size for you I
suspect. Also, the shop you bought it from will likely have the size
printed on the invoice (your bill of sale). If the bill says "size large"
and buddy is unhappy, that's really not your fault. If he's so particular
about sizing, he should have insisted on you measuring the frame manually
(as I or most anyone who rides seriously would..) getting explicit C to C
measurements for top tube, seat tube and chainstay length. An unfortunate
lack of communication on his part.

Good luck,

Scott..



Mike Jacoubowsky September 5th 03 04:50 AM

Fisher frame size from serial number?
 
Thanks for your input. I considered going to my local Fisher dealer and
taking some measurements, not sure what the proper etiquette is though.


Geoff: I don't think a shop is going to give you a bad time about measuring
the frame size of a couple bikes on their floor. I'd tell them the exact
truth; no need to make anything up (and people have a way of catching on
when you're making something up, and they almost always suspect something
worse than whatever the actual truth is).

--Mike-- Chain Reaction Bicycles
http://www.ChainReactionBicycles.com



DiabloScott September 5th 03 08:11 AM

Fisher frame size from serial number?
 
Mike Jacoubowsk wrote:
Thanks for your input. I considered going to my local Fisher
dealer and taking some measurements, not sure what the proper
etiquette is though.

Geoff: I don't think a shop is going to give you a bad time about
measuring the frame size of a couple bikes on their floor. I'd tell them
the exact truth; no need to make anything up (and people have a way of
catching on when you're making something up, and they almost always
suspect something worse than whatever the actual truth is).
--Mike-- Chain Reaction Bicycles http://www.chainreactionbicycles.com/h-
ttp://www.ChainReactionBicycles.com




Yeah, buy some Hammergel or something while you're there... bike
shops take that as a gesture of respect. Also, no frames in the world
are measured to the top of the seatpost extention. You're doing this
just in case he tries to give negative feedback on you so you'll have
a good response... otherwise I wouldn't make this an issue if your
buyer doesn't.



--
Check out my bike blog!

http://diabloscott.blogspot.com

--------------------------

Posted via cyclingforums.com
http://www.cyclingforums.com


All times are GMT +1. The time now is 12:47 AM.
Home - Home - Home - Home - Home

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com