CycleBanter.com

CycleBanter.com (http://www.cyclebanter.com/index.php)
-   Techniques (http://www.cyclebanter.com/forumdisplay.php?f=8)
-   -   relation between saddle height and horizontal position (http://www.cyclebanter.com/showthread.php?t=256746)

Emanuel Berg[_3_] November 6th 18 08:19 PM

relation between saddle height and horizontal position
 
If you radically increase the height of the
saddle, does it typically make sense to move
the saddle a bit forward as well? This is my
intuition but I have been wrong before.

--
underground experts united
http://user.it.uu.se/~embe8573

Duane[_2_] November 6th 18 09:03 PM

relation between saddle height and horizontal position
 
On 06/11/2018 2:19 PM, Emanuel Berg wrote:
If you radically increase the height of the
saddle, does it typically make sense to move
the saddle a bit forward as well? This is my
intuition but I have been wrong before.


Ignoring the question of the bike's geometry, I'm not sure why you would
radically increase the saddle height so I'll assume that you're fitting
a bike for the first time so you'd want to fit the saddle position.

The saddle fore/aft has to do with your position over the pedals. You
would need to adjust that.

https://www.ilovebicycling.com/fore-...ddle-position/


[email protected] November 6th 18 09:08 PM

relation between saddle height and horizontal position
 
On Tuesday, November 6, 2018 at 1:19:05 PM UTC-6, Emanuel Berg wrote:
If you radically increase the height of the
saddle, does it typically make sense to move
the saddle a bit forward as well? This is my
intuition but I have been wrong before.

--
underground experts united
http://user.it.uu.se/~embe8573


"Radically increase the height of the saddle"??? I suppose in reality, if you "radically" increase the height of the saddle, then you would need to worry a tiny bit about the offset of the saddle or position on the rails. But who radically adjusts the height of their saddle? Unless you are a teenage boy who stops riding for a few years, your height never ever changes enough to radically adjust your saddle height.

When I get a new bike to set the saddle height and offset, I shove the saddle all the way back on the rails. And set the saddle height to within +/- 0.5 inches of the correct height. I know my saddle height well enough and can look at saddles easy enough to tell about what is right. Not much guessing involved. And once the saddle is all the way back and about the right height, I go for a test ride around the block. And adjust the height a few millimeters. Another test ride and another adjustment. Maybe do that a few times. Then I never touch the saddle again. When you adjust the height a few millimeters, it makes no difference to the saddle offset.

I think you are making up things to worry about.

Emanuel Berg[_3_] November 6th 18 09:16 PM

relation between saddle height and horizontal position
 
wrote:

I think you are making up things to
worry about.


Ha! I'm enjoying myself! This is half the fun
with these modern bikes. It is like the ham
radio guys of old days. They spent all their
spare time tinkering with their equipment to be
able to communicate across the oceans, and when
they were able to do just that, what they
talked about was their gear and cables!

--
underground experts united
http://user.it.uu.se/~embe8573

Emanuel Berg[_3_] November 6th 18 09:29 PM

relation between saddle height and horizontal position
 
Duane wrote:

https://www.ilovebicycling.com/fore-...ddle-position/


This seems straightforward:

The Knee Over Pedal Spindle Method

The generally accepted way to find the
proper saddle position is called knee over
pedal spindle (KOPS). To find KOPS sit on
the bike with the pedals at the 3 o’clock
and 9 o’clock position.Â*Hold a plumb bob at
the front of your forward kneecap and see
where it hits in relation to the pedal
spindle. The line should intersect the
pedal spindle/axel. If it falls in front,
adjust the saddle rearward. If it falls
behind, adjust the saddle forward.

--
underground experts united
http://user.it.uu.se/~embe8573

[email protected] November 6th 18 11:38 PM

relation between saddle height and horizontal position
 
On Tuesday, November 6, 2018 at 2:30:00 PM UTC-6, Emanuel Berg wrote:
Duane wrote:

https://www.ilovebicycling.com/fore-...ddle-position/


This seems straightforward:


BUT IT IS NOT!!!!!!! The statement below says for the KOPS, you hold the plumb line at the front of the kneecap. BUT I have heard where you hold the plumb line at that little notch behind the kneecap. That will affect where the plumb line intersects the pedal spindle. Ain't nothing straight forward!

But you can sleep soundly knowing that where your knee is over the pedal spindle, little or lot forward or little or lot behind, it does not matter. The human body adapts equally fine wherever it falls. Look at pro triathalon and some pro tour riders now, they have their saddles shoved all the way forward on straight seatposts. And they do fine. And me and many others have their saddles shoved all the way back on setback seatposts. Like all pros did back when Eddy Merckx rode. Your saddle setback or forward position isn't too important.



The Knee Over Pedal Spindle Method

The generally accepted way to find the
proper saddle position is called knee over
pedal spindle (KOPS). To find KOPS sit on
the bike with the pedals at the 3 o’clock
and 9 o’clock position.Â*Hold a plumb bob at
the front of your forward kneecap and see
where it hits in relation to the pedal
spindle. The line should intersect the
pedal spindle/axel. If it falls in front,
adjust the saddle rearward. If it falls
behind, adjust the saddle forward.

--
underground experts united
http://user.it.uu.se/~embe8573



John B. Slocomb November 7th 18 12:20 AM

relation between saddle height and horizontal position
 
On Tue, 06 Nov 2018 20:19:03 +0100, Emanuel Berg
wrote:

If you radically increase the height of the
saddle, does it typically make sense to move
the saddle a bit forward as well? This is my
intuition but I have been wrong before.


The usual "rule of thumb" is that the fore and aft position of the
saddle is set so that with the knee bent 90 degrees the ball of the
foot (just behind the large toe) is over the center line of the pedal
when the pedal is at its most forward position..

Be aware that this is largely just a good starting point and depending
on how you ride the position can be changed to suit your riding style.

The "rule of thumb" for saddle height is that sitting on the seat with
the hips level and the crank turned so that the pedal is at the lowest
point the heel should just rest on the pedal with the leg straight.
And again this is a starting point and the final height should be set
to fit the riding style.
cheers,

John B.




[email protected] November 18th 18 08:20 PM

relation between saddle height and horizontal position
 
On Tuesday, November 6, 2018 at 11:19:05 AM UTC-8, Emanuel Berg wrote:
If you radically increase the height of the
saddle, does it typically make sense to move
the saddle a bit forward as well? This is my
intuition but I have been wrong before.

--
underground experts united
http://user.it.uu.se/~embe8573


Rather than increasing saddle height radically perhaps you should get a proper bike fitting. There are several services. Most people work their way into the proper position over time but a proper fitting would put you in the proper position immediately.

[email protected] November 18th 18 11:13 PM

relation between saddle height and horizontal position
 
On Sunday, November 18, 2018 at 1:20:16 PM UTC-6, wrote:

Rather than increasing saddle height radically perhaps you should get a proper bike fitting. There are several services. Most people work their way into the proper position over time but a proper fitting would put you in the proper position immediately.



No it wouldn't. A bike fitting might get you maybe possibly close to where you need to be. If you're lucky. But a bike fitting is just a guess. Only way to get properly fitted is to ride a bike for a long time and make adjustments as you go.

AMuzi November 18th 18 11:23 PM

relation between saddle height and horizontal position
 
On 11/18/2018 4:13 PM, wrote:
On Sunday, November 18, 2018 at 1:20:16 PM UTC-6, wrote:

Rather than increasing saddle height radically perhaps you should get a proper bike fitting. There are several services. Most people work their way into the proper position over time but a proper fitting would put you in the proper position immediately.



No it wouldn't. A bike fitting might get you maybe possibly close to where you need to be. If you're lucky. But a bike fitting is just a guess. Only way to get properly fitted is to ride a bike for a long time and make adjustments as you go.


Agreed. Humans are more dynamic than many 'experts' know.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971




All times are GMT +1. The time now is 04:31 PM.
Home - Home - Home - Home - Home

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com