View Single Post
  #6  
Old November 8th 18, 04:50 PM posted to rec.bicycles.tech
Duane[_2_]
external usenet poster
 
Posts: 401
Default Preserving en-route repair material

On 08/11/2018 11:26 AM, Mark J. wrote:
On 11/7/2018 11:12 AM, Duane wrote:
On 07/11/2018 8:08 AM, Tanguy Ortolo wrote:
Hello all,

As probably many of you, I keep essential repair tools and material in a
small bag under my saddle, that is: a folding screwdriver, a spare inner
tube, tire levers, patches, sandpaper and glue. And disposable plastic
gloves!

Anyway, I have an issue with preserving the spare inner tube and the
glue over time. I noticed the tube gets punctured, apparently by
abrasion, and the glue slowly evaporates, like its tube is not really
airtight.

I read somewhere that I could protect the tube by keeping it tightly
wrapped into an old sock, which I will try, but would you have any
advice regarding the glue?

Cheers,


I keep my tubes in a baggie. Not sure what you can do for glue.


For glue tubes, the RBT consensus appears to be:

1) Once opened, replace the glue tube.Â* (I usually save up flats so I
can use up more of a tube upon opening; glue tubes in the saddle bag are
one-shot emergency items).

2) Replace /un/opened glue tubes periodically, 'cause even unopened ones
dry out over time.Â* This one is hard to follow, who remembers when they
last changed that glue tube in their saddle bag?

Mark J.


I don't carry glue. I carry two tubes and a patch kit. I just replaced
the patch kit after reading this thread as I haven't used a patch in a
few years.
Ads
 

Home - Home - Home - Home - Home