On Fri, 19 Jul 2019 14:17:20 -0400, Duane
wrote:

On 19/07/2019 1:42 p.m., Andre Jute wrote:
On Friday, July 19, 2019 at 11:08:53 AM UTC+1, Duane wrote:
AK wrote:
On Thursday, July 18, 2019 at 5:54:16 PM UTC-5, John B. wrote:
On Thu, 18 Jul 2019 13:11:35 -0700 (PDT), wrote:

On Thursday, July 18, 2019 at 5:39:48 AM UTC+2, AK wrote:
I spent about 3.5 hrs. cleaning my chain and everything it comes in contact with.

What a tedious job.

Used the following:

1. Engine cleaner
2. Paint thinner
3. Used toothbrush
4. Occasional foul language

I mentioned it to my friendly bike repair guy and he said many do not
realize the damage a dirty chain does to the bearings etc.

It shortens their life.

I think it helped as I think I can go around 3 mph faster.

Any other maintenance tips?

Thanks,
Andy

It always too soon to quit.

If you ride a 15 dollar chain and a 30 dolar cassette and you are not a
bike nerd like some of us don't do that again. Wipe your chain as clean
as possible with a rag before lubing. Lube regularly with whatever oily
stuff and ride the **** out of your chain until some gears starts to
skip. Then replace the chain and cassette. If you ride a 45 dollar
chain and a 200 dollar cassette pay attention to some of the advice you get.


Lou, my 2 cents.

If you aren't a "bike nerd" take the bike to the shop and let somebody
else do it :-)
--
cheers,

John B.

Yeah right.

Pay him $25/hr X 3.5.

Andy


I use a Park chain cleaner tool. Clip on, fill with degreaser, run 30-40
crank strokes, change degreaser and repeat. Take a brush and clean the
cassette and cage with degreaser. Takes 10-15 minutes. Maybe 20 with a
beer in one hand. When dry lube the chain, run through the gears and wipe
off the chain.


The trick is to oil the chain sparingly between cleaning, wiping it before
to remove grit and after to remove excess oil. Takes another 5 minutes
and makes the cleaning a lot easier. Most people use too much oil and it
attracts grit.

I never tried wax but the people here recommending it sound like they know
what they’re talking about.

--
duane

You could just buy wax in a bottle, Duane, instead of messing around with a cooker. I used Finish Line white wax, from a bottle, for a year or two, and it works. Another poster mentioned that he still has half a bottle of Finish Line white wax left, and so do it; it's economical stuff.

Don't park your bike on your wife's carpets while you're using it though: it drops little gray balls of mixed wax and gunge wherever you ride or wheel the bike.

Andre Jute
Clean hands


I have a friend that uses the finish line white wax. Seems to work for
her. I've been using the finish line dry lube for ages and haven't seen
a reason to change.

Maybe if I did the mileage that James does or rode in the conditions
that Jay does I'd have to reconsider.

As some famous person once said," use whatever works for you" :-)
--
cheers,

John B.