"Facilius per partes in cognitionem totius adducimur." - Seneca
On Wed, 05 Jan 2005 22:07:46 GMT, "Gary Jacobson"
top-posted:

Mavic doesn't have the parts.
Maybe Wheels Manufacturing does. I sure hope so.
Thanks.
Maybe I can try a shop in France. It's the MX601 reference that could really
help.
Gary
"James Thomson" wrote in message
...
"Gary Jacobson" wrote:

Hoping, but doubt that Mavic will have longer axles to convert the
130mm MR601 hub I have to 135mm spacing.

Anyone have axles that will work, or know of a way to accomplish this?

As far as I'm aware, the MX601 was an MR601 with 135mm spacing that
differed only in the axle used. Have you asked Mavic if they can supply
you
with an axle?

James Thomson

When you called the shop tonight, I felt guilty that I had allowed
myself to be distracted by work from researching this when I first saw
your post. So I dragged out the manual ad rem again. If it's helpful,
the exploded diagrams (with Mavic part numbers) for the rear 601
series hubs are he

MR model -
http://www.businesscycles.com/graphi...601mr_rear.jpg

MX model -
http://www.businesscycles.com/graphi...601mx_rear.jpg

As you can see, the hubshell bearings are common to both models, but I
am concerned that the difference in the dimensions of the two
hubshells and their respective axles may preclude interchangeability
(assuming you can find an MX axle).

The other option you mentioned on the phone (using the cones from a
Suzue Pro-MaxSB hub) doesn't strike me as being poised on the brink of
success either, but I've got those axle sets in stock if you elect to
give it a shot. Since you mentioned this was for a touring bike, I
encourage you to seek a hub that hasn't needed such heroic measures to
be put in play lest it ever come to need attention while on tour.
-------------------------------
John Dacey
Business Cycles, Miami, Florida
Since 1983
Comprehensive catalogue of track equipment: online since 1996.
http://www.businesscycles.com