Offered for sale is a 54cm (centre-to-top) 700c Fixed wheel frame
custom made in 2001 from Columbus SP. Would make an excellent
'Courier' type bike.
This frame is in A1 condition. It was built as a Fixed Gear tourer. To
many custom features to mention

Seat tube is 54cm (centre-to-top)
Top tube is 56cm (centre-to-centre)
Rear dropout width is 135mm
275mm bottom bracket heigh.
Clearance for 700C x 32mm wheels (mudguard eyes in rear dropout and
halfway up fork -to avoid disk brake)
LS Cast horizontal track ends
Everest investment 'cast racing' lugs
Everest Uni-Crown fork crown
Disk brake specific fork to suit 155-160mm disk. With braze on HOPE
Remote Reservoir on right blade.
Cantilever/V-Brake braze ons on the seat stays.
Dynamo braze on on the left fork blade
3 top tube cable guides on top of top tube (offset to left of tube)
Bottle cage bosses on seat tube.
1" AHead size head tube and steerer
Seat pillar size - 26.8mm (not included).
31.8mm down tube diameter
28.6mm Seat tube diameter
25.4mm top tude diameter
Low temperature Silver soldered/brazed throughout
Hidden rear mudguard fixing points at chainstay and seatstay bridge
(no external bridges needed)
Double eyelets on front fork ends
No Reserve.

Thanks,
Ian Yates
Blackburn CTC