View Single Post
  #8  
Old August 21st 19, 10:24 PM posted to rec.bicycles.tech
Duane[_4_]
external usenet poster
 
Posts: 1,546
Default Darn near lost my sole early this morning!

AMuzi wrote:
On 8/21/2019 2:46 PM, Sir Ridesalot wrote:
On Monday, 19 August 2019 16:42:15 UTC-4, wrote:
On Monday, August 19, 2019 at 6:11:33 AM UTC-4, Sir Ridesalot wrote:
Very early this morning I put Look Delta cleats onto my Louis Garneau
road-bicycling shoes and then went for a ride of just over a kilometer
to go to a store and to test the placement of the cleats because I'm
going on a long ride later this morning.

Everything was fine until I unclipped my left foot. This is what I
found when i looked at the bottom of my shoe because the shoe was
making a rather loud clacking noise with every step.

https://flic.kr/p/2h1jKEy

I was NOT a happy bicyclist then.

Fortunately the checkout clerk at the store found a heavy-duty rubber
band she then gave me and that I was able to wrap around the shoe.
With that I was at least able to ride home.

This is not the first Louis Garneau product that has failed me rather
early in its life but it is the last one. I'm done with Louis Garneau
stuff. It's not cheap as far as prices go buy it's cheap quality. I
was amazed at how little glue was use to attach the some to the rest
of the shoe. Right now the show is heavily clamped with two big clamps
and a bunch of nylon toe-straps whilst the Gorilla Glue I used to try
and reattach the sole to the shoe fully cures which is stated to be in
24 hours. It's a good thing I have a pair of vintage Adidas Eddy
Merckx Competition Shoes I was able to put another pair of Look Delta
cleats on so I can use those shoes for today's ride.

In my experience and in my honest opinion Louis Garneau quality has
plummeted and I've decided that today was the last straw and I'm done
with this brand of bicycling gear. My Adidas Eddy Merckx shoes were
bought in 1986 and I had the bicycle shop drill them for the Look
Delta cleats at the time when I bought them and those shoes are still going strong.

Cheers

I've repaired two pair of stiff-soled shoes with JB weld two-part
epoxy. One was a DMX Carbon, and the other was a Northwave Carbon. I
got several more years out of both pair.


The Gorilla Glue repaired shoe is holding up so far which is a good
thing because today the right sole separated from most of the right
show. The only reason neither sole came off completely is that there are
two rives through the heel/sole of the shoes.

Just for fun I'm going to send an image of the shoes with separated
soles, to Louis Garneau.

Cheers


In Shenzhen or in Guangzhou?


Certainly not any longer in Quebec...

--
duane
Ads
 

Home - Home - Home - Home - Home