View Single Post
  #3  
Old February 1st 07, 05:01 PM posted to rec.bicycles.tech
Bill
external usenet poster
 
Posts: 100
Default Look KG461 Ergopost 2 compatibility

"Bill" wrote in message
...
I'm putting together a NOS KG461. It uses an internal wedge clamp for the
seatpost. Anyone know if the Look Ergopost 2 will work or will the wedge
crush the carbon?
Bill

For the archives. Heard from Look:
The ergopost 2 will work just fine. In addition to greasing the bolt

threads, make sure you put a little grease on the surfaces of the wedge so

that they will not bind and cause you to over-tighten the bolt. The correct

torque for this bolt is 12-15 NM.


Ads
 

Home - Home - Home - Home - Home