Thread
:
Shimano Cantilever question (BR-R550)
View Single Post
#
8
December 17th 04, 01:00 PM
Derk
external usenet poster
Posts: n/a
wrote:
use the "spring tension adjusting screw" (#2 in the diagram) to
vary the position of the arms in relation to the rim.
The spring itseelf is missing in the diagram I would say. I solved it by
bending the spring (the long iron "wire") outwards a bit. It was not
possible to completely get it right using the adjusting screw. I had to
bend the spring slightly.
Thank you all very much for the help: you gave me lots of useful tips.
I find it far more difficult to adjust then a normal Shimano caliper brake
for racing bikes.
Greets, Derk
Derk
Ads
Home
-
Home
-
Home
-
Home
-
Home