View Single Post
  #1  
Old July 20th 03, 11:55 PM
B. Sanders
external usenet poster
 
Posts: n/a
Default Shifter not Shifting right. Anyone have this prolem before? - shimano.jpg (0/1)

"Mike" wrote in message
...
Howdy,

I have an older (5 years maybe, not really sure) mountain bike. The

shifting mechanisms it has a
Shimano Altus ST-CT90s (See attached Picture). I've never had a problem

with them until this year
when I got my bike out. On this shifter, the thumb trigger is for

shifting down and the finger
trigger is for shifting up. THe thumb trigger works just fine. However

when I try to Upshift with
the finger trigger the ratcheting things inside there aren't catching on

what they are supposed to.
The only way I can get it to shif tis to apply a very strong pressure Down

(towards the ground) as I
pull the trigger forward. THen I can usually get it to catch inside and

shift gears.

I'm assuming I'll have to take my bike to some local bike shop but thought

I'd psot on here first
inc ase this is something anyone else has already seen.


There may be dirt and crud built-up inside the shifter that's keeping it
from working; but have you checked your derailleur? Is it clean and free of
grass and debris? Are the cables lubed and moving freely from end to end?
I'm willing to bet that your shifter is fine; but your derailleur and cables
need maintenance. A new shifter cable is probably a very good idea. It
will probably cure the problem. Just cleaning the jockey wheels on the
derailleur may work miracles for your shifting.

Barry


Ads
 

Home - Home - Home - Home - Home