Brad Kattelmann wrote:
I happened to acquire a Shimano LX 9 speed cassette and have gotten the
upgrade bug for my 1998 Trek 6000 mountain bike.
Here's the current rear setup on my bike:
7 speed cassette on 7 speed Freehub
Shimano Parralax hub
STX rear derailleur
7 speed shifter (Alivio or Acera, I think)
Now, as I see it, there's two options for me:
1) I can do the "8 of 9 on 7" upgrade talked about at Sheldon Brown's
site. This would require me to swap out my current shifter and
cassette, however, I could keep my freehub and avoid the redishing. For
an explanation, see http://www.sheldonbrown.com/k7.html#up7
2) My other option is to replace the Freehub and put all of the 9 speed
cassette on. This would require me to purchase a Freehub at least,
No, you don't need a new Freehub, just the Freehub _body_, about a $20 part.
and
redish the wheel. I am wondering if my STX derailleur will have enough
reach for the 32T of the new cassette.
Sure.
Either situation is going to require me to buy a new chain, but the less
I have to purchase, the happier my wife will be. I already have the
rear shifter, as my front shifter broke last year and the only shifters
I could find in a pinch were new LX shifters.
That's confusing, 'cause you say up above that you've got a 7-speed shifter.
What are your suggestions and thought on these two options?
Have many folks tried the "8 of 9 on 7," and are they happy with it?
Either of these will involve buying a 9-speed chain, so the only
difference is the Freehub body.
If money is tight, just go for option 1 in the short term, then buy the
new body when finances permit.
Sheldon "One Step At A Time" Brown
+---------------------------------------+
| Violence is the way stupid people |
| try to level the playing field. |
| --John Gregory Dunne |
+---------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com