|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
10 speed chain rides between rings
I have a Shimano DA10 speed drive train with an FSA K-force crank with
FSA 53/39 chainrings. Recently (after about 1K miles on the chain) the DA 10 chain began to ride between the rings when downshifting the front. The chain is not elongated, I've checked the fd adjustment, and I've lubed the chain which actually helped a bit. Of course, this happens more when the rear is in the outer four cogs, but it didn't happen for the first 1k miles. Any ideas? TIA |
Ads |
#2
|
|||
|
|||
10 speed chain rides between rings
cliff wrote: I have a Shimano DA10 speed drive train with an FSA K-force crank with FSA 53/39 chainrings. Recently (after about 1K miles on the chain) the DA 10 chain began to ride between the rings when downshifting the front. The chain is not elongated, I've checked the fd adjustment, and I've lubed the chain which actually helped a bit. Of course, this happens more when the rear is in the outer four cogs, but it didn't happen for the first 1k miles. Any ideas? TIA Do you have the FD cage at the proper height? The FD cage should be as close as possible to the big ring. |
#3
|
|||
|
|||
10 speed chain rides between rings
Yes the fd is less than or equal to 2mm from the big ring. The outer
cage plate is parallel to the chainrings. Kenny wrote: cliff wrote: I have a Shimano DA10 speed drive train with an FSA K-force crank with FSA 53/39 chainrings. Recently (after about 1K miles on the chain) the DA 10 chain began to ride between the rings when downshifting the front. The chain is not elongated, I've checked the fd adjustment, and I've lubed the chain which actually helped a bit. Of course, this happens more when the rear is in the outer four cogs, but it didn't happen for the first 1k miles. Any ideas? TIA Do you have the FD cage at the proper height? The FD cage should be as close as possible to the big ring. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Mech Advice wanted | Julesh | UK | 53 | May 17th 06 10:12 AM |
Chain waxing + graphite question | HarryB | Techniques | 410 | March 16th 06 01:57 AM |
The Speed Trap - BBC1 Scotland | Sandy Morton | UK | 305 | November 19th 05 04:37 PM |
A few fixed gear questions. | Will Fisher | Techniques | 39 | March 16th 05 04:56 PM |
ICYCLES Inventory List | ICYCLES | Marketplace | 0 | July 26th 03 08:25 PM |