|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
KH Moments or QU-AX CrMo
Smilymarco wrote: Do i have to repeat what i said in the other thread about that? Right, this is just silly. -- agentQ '*)--SmallSpin-'O,*' (http://www.youtube.com/watch?v=IiFMXG116BE) '*)---TreFlip-'O,' (http://www.youtube.com/watch?v=zpT0YFDgmz4) '*)--DoubbleFlip-'O,*' (http://www.vimeo.com/683454) --- 'Uneed Films' (http://www.uneedfilms.com) ------------------------------------------------------------------------ agentQ's Profile: http://www.unicyclist.com/profile/13021 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Ads |
#12
|
|||
|
|||
KH Moments or QU-AX CrMo
Smilymarco wrote: Do i have to repeat what i said in the other thread about that? The nubs got shortened by 2mm after the first batch... they do NOT have nubs anymore. Sorry? Anyways pigs when I got mine from UDC US I didn't see any without nubs on them. So if your ordering from UDC US you'll probably have nubs. -- Michaelgoround ------------------------------------------------------------------------ Michaelgoround's Profile: http://www.unicyclist.com/profile/17218 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#13
|
|||
|
|||
KH Moments or QU-AX CrMo
Wasnt meant to be an attack against you sry. There may be the possibility to get some cranks with nubs, depends on how large the stock was and how much they sold. You can just grind them off, but be carefull to not damage the welding around the nub, cause that will weaken the crank. -- Smilymarco 'Municycle.com' (http://www.municycle.com) Lesen - Denken - Posten ------------------------------------------------------------------------ Smilymarco's Profile: http://www.unicyclist.com/profile/4110 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#14
|
|||
|
|||
KH Moments or QU-AX CrMo
Michaelgoround wrote: Sorry? Anyways pigs when I got mine from UDC US I didn't see any without nubs on them. So if your ordering from UDC US you'll probably have nubs. NO. again this is not correct information. UDC-US has and will ship the new cranks with NO NUBS. -- agentQ '*)--SmallSpin-'O,*' (http://www.youtube.com/watch?v=IiFMXG116BE) '*)---TreFlip-'O,' (http://www.youtube.com/watch?v=zpT0YFDgmz4) '*)--DoubbleFlip-'O,*' (http://www.vimeo.com/683454) --- 'Uneed Films' (http://www.uneedfilms.com) ------------------------------------------------------------------------ agentQ's Profile: http://www.unicyclist.com/profile/13021 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#15
|
|||
|
|||
KH Moments or QU-AX CrMo
Michaelgoround wrote: Mine have nubs and their Isis. forrestunifreak wrote: The old ones do, but not anymore. There you go. Yeah you should probably call UDC first and ask them which ones you're getting. What they have in stock changes constantly, I'm sure, they might not even have the old ones with nubs anymore. -- forrestunifreak '*-My Gallery*' (http://tinyurl.com/wcrsl) - hasn't been updated*www.qu-ax.com* *unicycle for christ* Joe "Hodgekins" wrote: Oh... they don't kick bricks, do they? ------------------------------------------------------------------------ forrestunifreak's Profile: http://www.unicyclist.com/profile/6828 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#16
|
|||
|
|||
KH Moments or QU-AX CrMo
If you're riding street you don't want 150s, 125s or 137s would be better for flipping. If you're gonna do more trials then 150s would be better but I thought the Qu-Ax bend on a lot of people? In which case you'd be better off with Moments. Also, if you do decide to get the qu-ax and they come with nubs (which I doubt they will) then you can just grind them off. -- _Ground_Zero_ -Zero )-2xLegwrap-O 3rd ------------------------------------------------------------------------ _Ground_Zero_'s Profile: http://www.unicyclist.com/profile/15520 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#17
|
|||
|
|||
KH Moments or QU-AX CrMo
Sheesh! Qu-ax sounds confusing. Get moments -- unicycledood The.Mars.Volta wrote: haha, so young, yet so angry, damn that rap music. ------------------------------------------------------------------------ unicycledood's Profile: http://www.unicyclist.com/profile/14245 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#18
|
|||
|
|||
KH Moments or QU-AX CrMo
I think I'm going with moments. They are cheaper, don't have nubs, and don't bend. Pigs -- Pigs on Unicycles Blisters are like people, at first you are anoyed with them but soon you're at peace with them, and by that time they're gone. Homework kills trees! Stop the MADNESS!!I'm tighter than the Jonnas brothers' pants!! ------------------------------------------------------------------------ Pigs on Unicycles's Profile: http://www.unicyclist.com/profile/17341 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#19
|
|||
|
|||
KH Moments or QU-AX CrMo
Pigs on Unicycles wrote: I think I'm going with moments. They are cheaper, don't have nubs, and don't bend. Pigs QU-AX don't have nubs either. And they don't bend, either. I didn't know Moments where cheaper.. But seriously. Just decide whatever you think is best for you. -- forrestunifreak '*-My Gallery*' (http://tinyurl.com/wcrsl) - hasn't been updated*www.qu-ax.com* *unicycle for christ* Joe "Hodgekins" wrote: Oh... they don't kick bricks, do they? ------------------------------------------------------------------------ forrestunifreak's Profile: http://www.unicyclist.com/profile/6828 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#20
|
|||
|
|||
KH Moments or QU-AX CrMo
moments are like 5 bucks less. not that big a deal. -- Unicycle-Emele Any unicyclist in Westchester County, NY 'pm ' (http://tinyurl.com/6xu626)me. 'My video' (http://youtube.com/watch?v=cvBUcQ9QL_8) 'Other Vid' (http://youtube.com/watch?v=9_j_UFiv3sY) 'newest vid' (http://ca.youtube.com/watch?v=ReFi44k2lgY) maestro8 wrote: I'd rather watch you gas, brake, dip, dip. ------------------------------------------------------------------------ Unicycle-Emele's Profile: http://www.unicyclist.com/profile/16934 View this thread: http://www.unicyclist.com/thread/72929 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KH Moments or QU-AX CrMo | Pigs on Unicycles | Unicycling | 11 | September 18th 08 08:33 PM |
Red CrMo KH frame | Probailer2 | Unicycling | 17 | December 16th 06 04:27 PM |
Ishiwata 022 CrMo tubing? | Basjan | Techniques | 11 | January 13th 06 12:05 AM |
FS: New CrMo 5mm Skewer Sets | Kristan Roberge | Marketplace | 0 | February 17th 05 02:49 PM |
FS: New CrMo 5mm skewer sets | Kristan Roberge | Marketplace | 0 | December 18th 04 01:04 PM |