|
|
Thread Tools | Display Modes |
#71
|
|||
|
|||
Frame Kit vs. Basic Model?
Edward Dolan wrote: I am totally fed up with Peter Clinch promoting himself as a Medical Physics IT Officer (whatever the hell that is). That was what Spock or Bones did on the old Enterprise. He is even a greater ego maniac than I am. This is intolerable to me. No one can possibly be Greater than the Great Ed Dolan. Well, I'm a superegomaniac so I can tolerate the bifurcation in consciousness which allows for different egos to manifest at different times. I hereby challenge Peter Clinch to a duel to the death. Pistols of course at dawn down by the riverside. I'd've thought you'd've done it with 'bents. It could be the Great ARBR Rally of the Decade! Maybe you can distract him with a Rohloff hub or a question about your local 'bent dealer. He will have to come to SW Minnesota as I am no longer up for any travel. I'd take out the woman first. Hell hath no fury like a woman left all alone. Flowers usually work. Regards, Ed Dolan the Great - Minnesota aka Saint Edward the Great - Order of the Perpetual Sorrows - Minnesota |
Ads |
#72
|
|||
|
|||
Frame Kit vs. Basic Model?
In article ,
Peter Clinch writes: Tom Keats wrote: What exactly is wrong with Mike's bike? *No* bike, upright, recumbent, anything, can possibly be "100% comfortable" because there is never a situation where the requirements of being a bike don't compromise comfort to some degree. Thinking that a bike's comfort can never be improved under any circumsatnces is kidding yourself. My own bike is a joy to ride, when I do so within its limitations (I don't ride over loose egg gravel or underwater.) It doesn't hurt me at all. No sore feet, no sore bum, no sore back, no sore hands/wrists. If I didn't ride, I'd be all gimped up with sciatica. I wouldn't be surprised if riding was good therapy for hip dysplasia too. You speak of comfort in a relative sense. I've found a bicycle can be 100% comfortable relative to a simple standing state. A bicycle can also be 100% comfortable relative to a cracked toilet seat. cheers, Tom -- -- Nothing is safe from me. Above address is just a spam midden. I'm really at: tkeats [curlicue] vcn [point] bc [point] ca |
#73
|
|||
|
|||
Frame Kit vs. Basic Model?
NYC XYZ wrote:
Dude, what's obvious is that I want to know what I want to know. Ever heard of KISS? No. I asked whether "x" was "industry practice." And I told you what I'll tell you again in some more detail: the recumbent sales industry is such a small and finely spread industry, relying on rather maverick enthusiasts, that what the "industry standard" happens to be is not necessarily going to be what you encounter at your dealer. If you go into a typical bike shop and ask for an SMGT the "industry standard practice" is to tell you "we don't do those", so that snippet of info isn't a big help, even if you want to know it. If you want to know what his business practices are and why then he's the one to ask. I see the small wheel so rider position isn't forced to be too reclined. Like I said, "flexibility of frame design". You can just use bent tubes to prevent the rider recling too far, but that introduces other penalties like higher step over height and weaker frame spar. I see OSS 'cause it's supposed to be an "easy" 'bent. I don't see how you deduce the rear triangle as being not very rigid due to other design factors. If you read HPVel's blurb on their original rear suspension design they highlight a very rigid rear triangle as a key point. The Spirit doesn't *have* a rear triangle, so it follows it's not a rigid one... Why is it the only cycle they do without one? Because it won't fit with the rest of the design is the obvious answer. I've never asked about what I'll get from my dealer. I'm asking whether what I think is reasonable as per how the bike business works. So discuss it with someone really close to you who owes you service and a proper hearing and happens to be in the bike business. That'll be your dealer. And not only will you get answers, you'll get to know the guy you're dealing with better and enjoy a better business relationship. He will operate according to how his business works, and no other. It may well be that he'll agree with you where "the industry standard" doesn't. You'll never know if you don't ask him, and you still seem to be looking for excuses not to. Pete. -- Peter Clinch Medical Physics IT Officer Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net http://www.dundee.ac.uk/~pjclinch/ |
#74
|
|||
|
|||
Frame Kit vs. Basic Model?
NYC XYZ wrote:
Ah, but, for example, this bike's already got the V-brakes and standard front and rear suspension on it...if I upgrade to discs, etc., can I therefore expect to receive the V-brakes and suspension systems as well? In a word, no, and if you really don't already know that you had better have a long talk with the seller. Regards, Bob Hunt |
#75
|
|||
|
|||
Frame Kit vs. Basic Model?
Peter Clinch wrote:
No. Keep It Simple, Silly. And I told you what I'll tell you again in some more detail: the recumbent sales industry is such a small and finely spread industry, relying on rather maverick enthusiasts, that what the "industry standard" happens to be is not necessarily going to be what you encounter at your dealer. Straw Man Argument. Not what I was asking about. KISS. If you go into a typical bike shop and ask for an SMGT the "industry standard practice" is to tell you "we don't do those", so that snippet of info isn't a big help, even if you want to know it. If you want to know what his business practices are and why then he's the one to ask. Straw Man Argument. KISS. You're either being deceptive, or you've managed to confuse and deceive yourself. KISS, and you avoid Straw Man Arguments. Like I said, "flexibility of frame design". You can just use bent tubes to prevent the rider recling too far, but that introduces other penalties like higher step over height and weaker frame spar. Specifically, I'm wondering why they didn't carry over the, um, whachamacallit, that bit in the back of the frame which swings, that thingamajig they have on the SMGT line, instead of a straightforward design anyone else could have done. It'd be great to have designer notes. I think one bike maker had just such notes on their website once. Little things, nothing you could really study, but interesting as promotional material. If you read HPVel's blurb on their original rear suspension design they highlight a very rigid rear triangle as a key point. The Spirit doesn't *have* a rear triangle, so it follows it's not a rigid one... Why is it the only cycle they do without one? Because it won't fit with the rest of the design is the obvious answer. Um...what is a rear triangle?? Looking at the SMGTe and the Spirit side-by-side, I suppose I can imagine what you mean, but I don't understand why it wouldn't fit with the Spirit. I guess it's really a matter of cost. The Spirit seems intended as a casual bike, which is certainly the spirit in which I'll purchase it! No upgrades at all, 'cept mud-guards. So discuss it with someone really close to you who owes you service and a proper hearing and happens to be in the bike business. That'll be your dealer. Goodness, this is so inane I've got to use that impolite word, "inane." Why would I as the customer only listen to the salesman and no one else? And not only will you get answers, you'll get to know the guy you're dealing with better and enjoy a better business relationship. Goodness, this is so inane I've got to use that impolite word, "inane," again and repeat myself: why would I as the customer only listen to the salesman and no one else? He will operate according to how his business works, and no other. It may well be that he'll agree with you where "the industry standard" doesn't. You'll never know if you don't ask him, and you still seem to be looking for excuses not to. For Pete's sake, why would I as the customer only listen to the salesman and not ask around? Does it hurt? Is it hurting you? You seem to be looking for excuses to answer with non-answers. Pete. -- Peter Clinch Medical Physics IT Officer Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net http://www.dundee.ac.uk/~pjclinch/ |
#76
|
|||
|
|||
Frame Kit vs. Basic Model?
"Edward Dolan" wrote in message ... "Johnny Sunset aka Tom Sherman" wrote in message oups.com... Peter Clinch who is a Medical Physics IT Officer [1] wrote: ...I point out that the earth is round and gravity pulls you down as well?... Really? I was under the impression that gravity was a mutual attraction between different bodies of mass. Down is a concept based on an arbitrary frame of reference [2]. I was also of the understanding that the object known as Earth was geoid shaped, not round. [1] Not really relevant, except it annoys The Grate One. I am totally fed up with Peter Clinch promoting himself as a Medical Physics IT Officer (whatever the hell that is). He is even a greater ego maniac than I am. This is intolerable to me. No one can possibly be Greater than the Great Ed Dolan. I hereby challenge Peter Clinch to a duel to the death. Pistols of course at dawn down by the riverside. He will have to come to SW Minnesota as I am no longer up for any travel. Regards, Ed Dolan the Great - Minnesota aka Saint Edward the Great - Order of the Perpetual Sorrows - Minnesota Ah, Ed was it only yesterday you were pining to go to Timbuktu? Too the main point, will you need a second? Jim C |
#77
|
|||
|
|||
Frame Kit vs. Basic Model?
"Jim" wrote in message news:lfuMf.187812$oG.126100@dukeread02... "Edward Dolan" wrote in message ... "Johnny Sunset aka Tom Sherman" wrote in message oups.com... Peter Clinch who is a Medical Physics IT Officer [1] wrote: ...I point out that the earth is round and gravity pulls you down as well?... Really? I was under the impression that gravity was a mutual attraction between different bodies of mass. Down is a concept based on an arbitrary frame of reference [2]. I was also of the understanding that the object known as Earth was geoid shaped, not round. [1] Not really relevant, except it annoys The Grate One. I am totally fed up with Peter Clinch promoting himself as a Medical Physics IT Officer (whatever the hell that is). He is even a greater ego maniac than I am. This is intolerable to me. No one can possibly be Greater than the Great Ed Dolan. I hereby challenge Peter Clinch to a duel to the death. Pistols of course at dawn down by the riverside. He will have to come to SW Minnesota as I am no longer up for any travel. Ah, Ed was it only yesterday you were pining to go to Timbuktu? Too the main point, will you need a second? I will get a yahoo out of the local saloon to be my second if I can sober him up. In the event I am shot dead, I have decided to come back as a Great Sequoia Tree where I will lord it over all creation. I would urge anyone who has any idea of adventure in their life to get it over with before they turn 40. After that, it is too late. As much as I would like to cross the Sahara by camel caravan to Timbuktu, I fully realize it is never going to happen. I should have done it when I was about 30 or so, but I was too busy at the time hiking in and out of the Grand Canyon - and communing with the mighty Sequoia Tree in that National Park of the same name there in the Sierra Mountains of California. Regards, -- Ed Dolan the Great - Minnesota aka Saint Edward the Great - Order of the Perpetual Sorrows - Minnesota |
#78
|
|||
|
|||
Frame Kit vs. Basic Model?
NYC XYZ wrote:
Keep It Simple, Silly. That's what I was trying to do. Think about it... My idea: spend 10 minutes talking to one person who can give you a detailed answer of direct relevance to your personal situation, which is then a springboard for any further issues you wish to investigate. Your idea: spend a week or more in multiple conversations across 3 Usenet groups to get answers that may mean nothing in your particular situation and have no context of what will actually happen with your own bike as a basis. Which of those is simpler? So if you want to KISS, take my advice, because it keeps it simpler. Specifically, I'm wondering why they didn't carry over the, um, whachamacallit, that bit in the back of the frame which swings, that thingamajig they have on the SMGT line If you have the overall immediately user-friendly configuration of the Spirit then you can't put in a separate rear triangle without a fair bit of extra work. The Cannondale recumbent went to those lengths, but as a result it cost a *lot* more and weighed more than it needed to, and for the sort of riding the bike is pitched at it's questionable about whether that degree of engineering is really a desirable option. instead of a straightforward design anyone else could have done. If "anyone" could have done it then "anyone" would. The Spirit has consistently been reviewed towards the top of the compact pack. Bike designs are a whole package, not isolated bits of design bolted together. It'd be great to have designer notes. So ask the people who can give you a direct answer, HP Velotechnik, or ask via one of their dealers, rather than wonder aloud on Usenet if you /really/ want to know. KISS. Um...what is a rear triangle?? It's a triangular frame component at the rear of the bike. This is the sort of thing where a guess will be right, like front forks being the fork shaped things at the front... Looking at the SMGTe and the Spirit side-by-side, I suppose I can imagine what you mean, but I don't understand why it wouldn't fit with the Spirit. I guess it's really a matter of cost. More cost, more weight, and, as you suggest something that could well be over-engineering in the context of the whole bike. Goodness, this is so inane I've got to use that impolite word, "inane." Why would I as the customer only listen to the salesman and no one else? Not what I'm getting at. Why should you listen to everyone else, but not the salesman? He's a simple, single point of contact and if he's worth a damn as a dealer then your satisfaction as a customer is of paramount importance to him. He should be on your side, and he knows more about his business and how he runs it and why than anyone else, and he probably knows more about the bike than anyone answering you on Usenet because he puts them together and sells them for a living. He is an obvious *first* point of contact. So KISS should tell you that he's where you start in this case, not where you end. For Pete's sake, why would I as the customer only listen to the salesman and not ask around? Does it hurt? Is it hurting you? You seem to be looking for excuses to answer with non-answers. I'm trying to make it easy for you by directing you to the best place to *start* when it comes to specific questions regarding your bike and how it will be dealt with. If it really bothered me that you choose not to do so I would just killfile you and move on, but I am trying to help you by persuading you to /start/ your dialogue with the person who can give you the most and most relevant information in the course of a single 10 minute 'phone call. And once you've had that conversation then you'll be in a much better position to have a useful debate on Usenet. And it's what KISS says you should be doing, if you really believe in it as a good thing. Pete. -- Peter Clinch Medical Physics IT Officer Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net http://www.dundee.ac.uk/~pjclinch/ |
#79
|
|||
|
|||
Frame Kit vs. Basic Model?
"NYC XYZ" wrote in message oups.com... Peter Clinch wrote: [...] He will operate according to how his business works, and no other. It may well be that he'll agree with you where "the industry standard" doesn't. You'll never know if you don't ask him, and you still seem to be looking for excuses not to. For Pete's sake, why would I as the customer only listen to the salesman and not ask around? Does it hurt? Is it hurting you? You seem to be looking for excuses to answer with non-answers. You need to retire from this fray and leave Peter Clinch to the likes of me. I truly understand him and how to deal with him. In short, we both know how to go round and round the mulberry bush until one or the other of us gets dizzy and falls. I will drive him mad before he can drive me mad. It is what we old men are expert at. The trouble is Old Pete kill filed me long ago because I took extreme exception to his signature. We will never get beyond that until he changes it. Of such mole hills are mountains made. Regards, Ed Dolan the Great - Minnesota aka Saint Edward the Great - Order of the Perpetual Sorrows - Minnesota |
#80
|
|||
|
|||
Frame Kit vs. Basic Model?
Damn, you say that with such earnesty! I think you out-do the Grate One himself. I'll be picking up the bike as early as this weekend, or in another month, mostly depending on whether and when this dealer decides to return my phone calls and e-mail. Thanks for all your help, and thanks to all the gang on these newsgroups. The first training ride for the 145-miler in May is this Saturday!!! I'll have to do that one on an upwrong. =( Peter Clinch wrote: NYC XYZ wrote: Keep It Simple, Silly. That's what I was trying to do. Think about it... My idea: spend 10 minutes talking to one person who can give you a detailed answer of direct relevance to your personal situation, which is then a springboard for any further issues you wish to investigate. Your idea: spend a week or more in multiple conversations across 3 Usenet groups to get answers that may mean nothing in your particular situation and have no context of what will actually happen with your own bike as a basis. Which of those is simpler? So if you want to KISS, take my advice, because it keeps it simpler. Specifically, I'm wondering why they didn't carry over the, um, whachamacallit, that bit in the back of the frame which swings, that thingamajig they have on the SMGT line If you have the overall immediately user-friendly configuration of the Spirit then you can't put in a separate rear triangle without a fair bit of extra work. The Cannondale recumbent went to those lengths, but as a result it cost a *lot* more and weighed more than it needed to, and for the sort of riding the bike is pitched at it's questionable about whether that degree of engineering is really a desirable option. instead of a straightforward design anyone else could have done. If "anyone" could have done it then "anyone" would. The Spirit has consistently been reviewed towards the top of the compact pack. Bike designs are a whole package, not isolated bits of design bolted together. It'd be great to have designer notes. So ask the people who can give you a direct answer, HP Velotechnik, or ask via one of their dealers, rather than wonder aloud on Usenet if you /really/ want to know. KISS. Um...what is a rear triangle?? It's a triangular frame component at the rear of the bike. This is the sort of thing where a guess will be right, like front forks being the fork shaped things at the front... Looking at the SMGTe and the Spirit side-by-side, I suppose I can imagine what you mean, but I don't understand why it wouldn't fit with the Spirit. I guess it's really a matter of cost. More cost, more weight, and, as you suggest something that could well be over-engineering in the context of the whole bike. Goodness, this is so inane I've got to use that impolite word, "inane." Why would I as the customer only listen to the salesman and no one else? Not what I'm getting at. Why should you listen to everyone else, but not the salesman? He's a simple, single point of contact and if he's worth a damn as a dealer then your satisfaction as a customer is of paramount importance to him. He should be on your side, and he knows more about his business and how he runs it and why than anyone else, and he probably knows more about the bike than anyone answering you on Usenet because he puts them together and sells them for a living. He is an obvious *first* point of contact. So KISS should tell you that he's where you start in this case, not where you end. For Pete's sake, why would I as the customer only listen to the salesman and not ask around? Does it hurt? Is it hurting you? You seem to be looking for excuses to answer with non-answers. I'm trying to make it easy for you by directing you to the best place to *start* when it comes to specific questions regarding your bike and how it will be dealt with. If it really bothered me that you choose not to do so I would just killfile you and move on, but I am trying to help you by persuading you to /start/ your dialogue with the person who can give you the most and most relevant information in the course of a single 10 minute 'phone call. And once you've had that conversation then you'll be in a much better position to have a useful debate on Usenet. And it's what KISS says you should be doing, if you really believe in it as a good thing. Pete. -- Peter Clinch Medical Physics IT Officer Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net http://www.dundee.ac.uk/~pjclinch/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Frame Kit vs. Basic Model? | NYC XYZ | Techniques | 68 | February 28th 06 02:10 AM |
WTB: 58cm Trek or 57cm Lemond etc.. | oclvframe | Marketplace | 1 | October 24th 05 06:31 PM |
FS: NOS 56cm Colnago SLX Conic frame and fork | Frank | Marketplace | 0 | February 15th 05 10:07 PM |
Design News article about bikes | [email protected] | Techniques | 8 | January 14th 05 01:07 PM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |