|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
tubeless tires tech
On Mon, 25 Feb 2019 21:41:42 -0800 (PST), jbeattie
wrote: On Monday, February 25, 2019 at 9:08:43 PM UTC-8, John B. Slocomb wrote: On Mon, 25 Feb 2019 17:55:47 -0600, AMuzi wrote: On 2/25/2019 5:47 PM, John B. Slocomb wrote: On Mon, 25 Feb 2019 13:29:39 -0800 (PST), Zen Cycle wrote: On Tuesday, February 19, 2019 at 1:03:17 PM UTC-5, Frank Krygowski wrote: On 2/19/2019 11:20 AM, AMuzi wrote: https://janheine.wordpress.com/ Damn. Sounds complicated and fussy. It's not that bad once you figure it out. There are a few tricks though - like coating the tire bead with sealant; using two smaller treatments of sealant rather than one heavier treatment. Until you get it right you're just as likely to experience a slow leak as you are to get a good seal. My last installation of tubeless-ready tires on tubeless rims on my MTB lasted for the whole springfall season with no problems. I'm lucky to get 30 miles a week on the MTB though. All that makes gluing on a tubular sound easy :-) Our grandfathers managed that in the 1890s without youtube. Lord, the handicaps that the old folks operated under. It is simply amazing that the survived at all. The deal is that back in the bad old days, you could get a cheap cotton tubular . . . for cheap. I had bizarre crappy tubulars from Mexico and Clement Elvezias and 50s for $10 or so, or Vittoria Mondiales for under $10. They were SOP for sport bikes and nothing special. Then we got first generation Turbos or Mavic Elans, which rode like rocks and were not really competitive with even cheap tubulars. Then we got better clinchers like the Michelin Supercomp HDs and others. Then tubulars turned into race day novelties -- and really expensive novelites at that. Now, I can get a clincher that, with a latex tube, will give me lower rolling resistance than a well-glued tubular and way better rolling resistance than a poorly glued tubular. And it will cost way less and doesn't have to be glued or unstitched/restitched if it goes flat. My tubulars always looked wrong after a repair. I don't know why anyone bothers with tubulars except those in search of the last word in light weight -- and with a high budget and time to fuss with gluing. If you gave our forefathers a choice of a tubular versus a clincher, they would go with the clincher and wonder why non-racers used anything else. They would also go with indoor plumbing and cars. -- Jay Beattie. True, but your dollar then bought a lot more then it does today. My first job, in the sense that I was working for someone else than my parents, paid $0.50/hour. I worked a 10 hour day on Saturday and had a whole 5 dollars to paint the town red on Saturday night. Whoopee! -- Cheers, John B. |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tubeless tires tech | Sir Ridesalot | Techniques | 2 | February 26th 19 09:11 AM |
Tubeless Tires | [email protected] | Techniques | 5 | April 12th 17 03:49 AM |
tubeless tires | steve | Techniques | 2 | March 14th 08 11:18 AM |
Tubeless tires | MT | Techniques | 2 | March 30th 05 09:08 AM |
tubeless tires | Operator | Mountain Biking | 10 | July 26th 04 10:39 AM |