|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
mavic hub spacers for 10speed cassette
Hey All.
I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh |
#2
|
|||
|
|||
mavic hub spacers for 10speed cassette
Josh wrote: Hey All. I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh Sounds like the return spring of the rear der is getting tired. Der hanger straight? Der come down to smallest cog w/o inner wire attached? If it does, new cable/housing. If it doesn't w/o the inner wire attached, put a .5mm chainring spacer between the der bolt and the frame to move it out a wee bit allowing the spring to be 'tighter' bringing chain to smallest cog. |
#3
|
|||
|
|||
mavic hub spacers for 10speed cassette
Everything is actually brand new, which I also suppose could be a problem.
Maybe it just all needs to settle in a bit. I'll try a spacer on the derailleur bolt. thanks for the help -j "Qui si parla Campagnolo" wrote in message oups.com... Josh wrote: Hey All. I've got a new 10sp DA cassette i'm trying to get onto a Mavic Cosmos. The wheel came with a ~1mm spacer, plus the thin spacer that comes with the 10 speed cassette. Without the 1mm spacer, the lockring doesn't tighten the cogs. However, I'm having trouble shifting into the highest cog. Even with the limit screw backed all the way out, the derailleur cage doesn't move over quite far enough. Do I need something like a 0.5mm spacer on here? Any ideas? thanks so much -Josh Sounds like the return spring of the rear der is getting tired. Der hanger straight? Der come down to smallest cog w/o inner wire attached? If it does, new cable/housing. If it doesn't w/o the inner wire attached, put a .5mm chainring spacer between the der bolt and the frame to move it out a wee bit allowing the spring to be 'tighter' bringing chain to smallest cog. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
can the mavic M10 cassette work with _any_ shimano-splined freehub? | [email protected] | Techniques | 0 | November 4th 05 03:24 PM |
Cassette Spacers | question man | Techniques | 3 | August 22nd 05 04:52 PM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 8th 04 02:29 PM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 1st 04 07:25 PM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 1st 04 04:12 PM |