|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
the blown tube box holds 25 tubes-
the majority (vast) are done in by tube wear not tube punctures-both seam and longitudinal stress wear and internally produced blowouts from slime liner overlap-cure there is rotation also positive for tire life. the other porblem is patch leak-air creep out from under the patch-and i am not a slob installer. so frankly, i threshold and am at the poiut oif uttering the immortal words- **** this expletive deleted and am going to try super glue as a long trial the reason ? walmart's glue rack is serving up a four tube card of super glue for a buck evil demons. this may be a local phenom but trundle over and looksee |
Ads |
#2
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
In article .com,
wrote: the blown tube box holds 25 tubes- the majority (vast) are done in by tube wear not tube punctures-both seam and longitudinal stress wear and internally produced blowouts from slime liner overlap-cure there is rotation also positive for tire life. the other porblem is patch leak-air creep out from under the patch-and i am not a slob installer. Hmmm, this shouldn't be a problem the patch is applied correctly. so frankly, i threshold and am at the poiut oif uttering the immortal words- **** this expletive deleted and am going to try super glue as a long trial But super glue dries to an epoxy-like hardness. Wouldn't inflating the tube lead to a deformity or preclude an air-tight seal as the pressurized tube pulls away from the inelastic patched area? Luke |
#3
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
i patched with super glue once -twice? no problems 'cept for the
expense-opening the glue bottle is like tapered crank creep here in hot swfla therefore the post advising of the 4 per card wal offer tube rubber apparently stretchs away without pressure lose thru porosity then fracture question was or is-is the patch compatible with isocyanurinate as it is on bell contact cement? seems ok so far i asked myself-am i applying the contact cement as directed? too thick maybe? but results are some patchs live some don't and off course there's always-well, now it's too thin and at that point exblative deleted the idea is REDUCE DOWNTIME. a good reason for running quality tubes at $9 per unless the vandalism qou is wayhi |
#4
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
|
#5
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
right-the ridge.
every notice how punctures occur adjacent tube ridge's ridge puncture proximity and probability of occurence thereon is off course directly proportional to severe weather condition, presence of rabid squirrels, ditto mexicans... yeah, i scrap the ridges off with a razor blade held vertical to the ridge top lika cabinet scraper, then sand, rubbing CHO, dry, let pathch carfefuly cure in dry hot sun... and then the ridge seams to bear no topographic relation to the leaking out from under. so what's coming out , i guess, is a bending deformatea of the glue strata produced by tube bending as tire flattens absorbing shock. the isocyanurinate strata is theowreckticallee impervious to these machinations having solidly and eternally bonded the two rubber strata. will report back thru enemy lines |
#6
|
|||
|
|||
self sealing tubes HD commuting touring tubes patch glue knee how ma
fer sure.
LOL, John |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
self sealing touring tubes | [email protected] | Techniques | 0 | July 23rd 05 04:38 PM |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
ARRRRRGH | Luigi de Guzman | General | 65 | April 30th 04 03:35 AM |
Self sealing inner tubes | L'acrobat | Australia | 2 | April 28th 04 04:30 AM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |