A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Frame sizing question: Go a size up or a size down?



 
 
Thread Tools Display Modes
  #1  
Old December 7th 06, 07:59 PM posted to rec.bicycles.tech
kwalters
external usenet poster
 
Posts: 37
Default Frame sizing question: Go a size up or a size down?

Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken

Ads
  #2  
Old December 7th 06, 08:03 PM posted to rec.bicycles.tech
Bill Sornson
external usenet poster
 
Posts: 4,098
Default Frame sizing question: Go a size up or a size down?

kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


Why are you married to this make of bike?


  #3  
Old December 7th 06, 08:16 PM posted to rec.bicycles.tech
landotter
external usenet poster
 
Posts: 6,336
Default Frame sizing question: Go a size up or a size down?


kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


The red one, duh.

  #4  
Old December 7th 06, 08:29 PM posted to rec.bicycles.tech
Ozark Bicycle
external usenet poster
 
Posts: 3,591
Default Frame sizing question: Go a size up or a size down?


kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


Regarding "what you have ridden in the past", have you arrived at an
"ideal" top tube length? Go with whichever of your two choices (60 v
62) comes closest to that dimension. If neither comes close, look
elsewhere.

  #5  
Old December 7th 06, 08:44 PM posted to rec.bicycles.tech
Art Harris
external usenet poster
 
Posts: 577
Default Frame sizing question: Go a size up or a size down?

kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?


Be aware that "frame size" a.k.a. seat tube length, is not that
critical, and that there are at least three ways of specifying seat
tube length.

Personally, I like a large frame, so I would round up as long as I
could straddle the bike (and as long as all the other parameters were
acceptable). I'd be more concerned with having adequate tire
clearance, generous wheelbase, and appropriate top tube length and
trail.

I own both 62 cm and 63 cm (center-to-center) frames and prefer the 63
cm only because it's easier to get the bars higher (still 2-3/4" below
the saddle) and because that bike has better tire clearance (not
related to frame size).

If you can't decide between the 60 cm and 62 cm frame, base your choice
on top tube length.

BTW, the current fad is to ride a smaller frame with a long seat post
and rising stem.

Art Harris

  #6  
Old December 7th 06, 08:47 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 244
Default Frame sizing question: Go a size up or a size down?

kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


Since no one else wants to give a constructive answer. I would pick
the larger of the two if it is truely the difference between a 60 and
62 cm frame. Assuming top tube is 58 cm on the 60 and 59 cm on the 62.
And you want a 58.5 cm top tube. I've had too small bikes in the past
and could not get them to fit right. I've had luck getting too large
bikes to fit well. If the difference is as small as described above,
then you may never even notice the difference in the frame once you are
riding it.

  #7  
Old December 7th 06, 09:40 PM posted to rec.bicycles.tech
Mike Jacoubowsky
external usenet poster
 
Posts: 2,972
Default Frame sizing question: Go a size up or a size down?

Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.


Are the frames measured center-to-center or center-to-top? And how tall are
you? If it's a center-to-top measurement, and you're 6'2, chances are likely
that you'll feel more comfortable on the taller bike. But this is a
difficult (OK, impossible) thing to figure out without having more
information (your dimensions & the bike's dimensions). All I can go by are
generalities based on overall height and frame size, based upon our
customers.

--Mike Jacoubowsky
Chain Reaction Bicycles
www.ChainReaction.com
Redwood City & Los Altos, CA USA

"kwalters" wrote in message
...
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken



  #8  
Old December 7th 06, 09:47 PM posted to rec.bicycles.tech
bill
external usenet poster
 
Posts: 94
Default Frame sizing question: Go a size up or a size down?


kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


For seatpost exposure 3/8" doesn't really matter that much--that's the
difference between 61 and 62.

Pick the frame that fits best out of the two. Maybe you need the 62
because oyu have a long torso. Maybe you'd rather have the 60 becasue
you have a short torso. (Bigger frames tend to have longer top tubes).

So look at the fit aspects other than seatpost.

  #10  
Old December 7th 06, 09:53 PM posted to rec.bicycles.tech
Qui si parla Campagnolo Qui si parla Campagnolo is offline
Banned
 
First recorded activity by CycleBanter: Jul 2006
Posts: 3,259
Default Frame sizing question: Go a size up or a size down?


kwalters wrote:
Theoretical question: A frame builder makes frames
in even sizes; you are interested in a 60cm or a 62cm.
After studying the respective geometries and comparing
them with what you have ridden in the past, you decide
a 61cm would be best. However, builder doesn't offer a
61 and you can't afford a custom build (don't even want
to discuss it). Would you go a size up or a size down?

(And, to the pundits who would say: "Ride them both" you
have to say" "Impossible to do in this town".)

So, who would go with 62cm & who with 60? & why?

Thanks. Ken


SAME seat tube angle or different?? Differences in top tube length??

Sizing that measures ONLY seat tube length is only about 10%(or less)
of the equation.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
threadless fork size: one size smaller for frame size [email protected] Techniques 2 February 24th 06 04:49 AM
another frame size question(still confused, even more so with Colnago sizes) [email protected] Techniques 4 February 14th 06 03:31 PM
MTB frame size question [email protected] Techniques 8 September 22nd 05 03:23 PM
Frame size question Michel Mountain Biking 3 June 13th 04 12:38 PM
Frame sizing question alex887 Mountain Biking 6 March 23rd 04 09:22 AM


All times are GMT +1. The time now is 03:43 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.