A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » Regional Cycling » UK
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Shimano A20 gear levers



 
 
Thread Tools Display Modes
  #1  
Old November 4th 07, 03:39 PM posted to uk.rec.cycling
archierob
external usenet poster
 
Posts: 46
Default Shimano A20 gear levers

Any one replaced the cable in one of these? Tried Googling but not a
lot of info. They are on my sons mountain bike. Any help appreciated -
but he will have to wait a while as I have just had eye op.

Cheers.


Ads
  #3  
Old April 4th 08, 05:05 PM posted to uk.rec.cycling
David Lowther
external usenet poster
 
Posts: 43
Default Shimano A20 gear levers

"archierob" wrote in message
...
Any one replaced the cable in one of these? Tried Googling but not a
lot of info. They are on my sons mountain bike. Any help appreciated -
but he will have to wait a while as I have just had eye op.


Have you tried the Shimano tech docs pages ?

http://techdocs.shimano.com/techdocs/index.jsp

I couldn't find "A20" there, but they might have instructions on how to
replace the cable for something similar enough.

HTH

Dave.


  #4  
Old April 5th 08, 03:50 PM posted to uk.rec.cycling
Alan Braggins
external usenet poster
 
Posts: 1,869
Default Shimano A20 gear levers

In article , David Lowther wrote:
"archierob"
Any one replaced the cable in one of these? Tried Googling but not a
lot of info. They are on my sons mountain bike. Any help appreciated -
but he will have to wait a while as I have just had eye op.


Have you tried the Shimano tech docs pages ?
http://techdocs.shimano.com/techdocs/index.jsp
I couldn't find "A20" there, but they might have instructions on how to
replace the cable for something similar enough.


Part number is ST-AT20, but the search doesn't find anything for that,
it's probably too old. (At least assuming it's the same Altus A20
brake and gear levers one of my bikes has.)
Anyway, rear derailleur in high, front in low, and the cable end will
line up with a little hole in the side of the shifter, push the old
cable out through that, then the new one goes in the hole the old one
just came out of.

archierob, if that isn't enough, mail me when you've recovered from your
eye op, and I'll take some photos.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Car Free!! - Simple gear levers required. Hake UK 8 December 5th 06 05:57 PM
Push-me, pull-me? gear change levers. Terry Collins Australia 9 May 8th 06 01:00 PM
From Shimano Sora levers to 105 levers or Campy Mirage levers? none Techniques 32 September 3rd 05 12:50 PM
Where to find gear levers? GBR Australia 1 September 6th 04 09:27 PM
Doable - a 9 gear Shimano Cluster on a 7 speed Shimano Exage hub? Peter General 4 April 29th 04 09:52 AM


All times are GMT +1. The time now is 12:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.