A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Sram i-Motion 3 Speed Coaster Review



 
 
Thread Tools Display Modes
  #11  
Old November 27th 09, 11:18 PM posted to rec.bicycles.tech
Jim A
external usenet poster
 
Posts: 618
Default Sram i-Motion 3 Speed Coaster Review

pdxrandonneur wrote:
On Nov 25, 6:12 pm, pH wrote:
snip
As an internal-gear fan (although I should not be, at my weight), I
appreciate your review.

I am intrigued by your comments that Sturmey-Archer is working on new
offerings and hope there will be reviews on their equipment as well.


They have actually updated the web site, have a blog and a facebook
page and the new catalog is mouth watering:

http://www.sturmey-archer.com/userfi..._Catalogue.pdf

The new shifters for the 3 & 5 speed hubs look extremely nice and will
be available in thumb, downtube and bar end versions. Last word from
Sturmey is that they will be available when the S3X hubs get to
market, supposedly in a few months. Every gear hub fan should make a
point of buying one in order to demonstrate that there is in fact a
market for nice gear hub shifters. We have been bitching about this
for long enough that we need to put our money where our mouth is now
that someone listened.

-Rando


That's a very good point. I won't take much persuading to buy a new
shifter. My 5-speed SA twist grip looks like it's made by Fisher-Price.
The new twist grips look better, but I especially like the look of the
simple lever which can also be used as a down-tube shifter.
Ads
  #12  
Old November 27th 09, 11:22 PM posted to rec.bicycles.tech
Jim A
external usenet poster
 
Posts: 618
Default Sram i-Motion 3 Speed Coaster Review

pdxrandonneur wrote:
What we really need is a universal bar end/thumb shifter for all
single cable-pull gear hubs, with a removable indexing disc that could
be swapped out for different hubs. There are enough users of gear hubs
to make this a succesful product, and most of us would be willing to
fork over *a lot* of money for a really nice shifter if we knew we
could keep it on the bike after future hub upgrades.


I hear what you're saying but I hope my hub has a good few years in it
yet! I'm not convinced any shifter would out-last it.
  #13  
Old November 28th 09, 02:35 AM posted to rec.bicycles.tech
Dan Burkhart[_106_]
external usenet poster
 
Posts: 14
Default Sram i-Motion 3 Speed Coaster Review

On Nov 27, 5:18*pm, Jim A wrote:
pdxrandonneur wrote:
On Nov 25, 6:12 pm, pH wrote:
snip
As an internal-gear fan (although I should not be, at my weight), I
appreciate your review.


I am intrigued by your comments that Sturmey-Archer is working on new
offerings and hope there will be reviews on their equipment as well.


*They have actually updated the web site, have a blog and a facebook
page and the new catalog is mouth watering:


http://www.sturmey-archer.com/userfi...y-Archer_2009-...


The new shifters for the 3 & 5 speed hubs look extremely nice and will
be available in thumb, downtube and bar end versions. Last word from
Sturmey is that they will be available when the S3X hubs get to
market, supposedly in a few months. Every gear hub fan should make a
point of buying one in order to demonstrate that there is in fact a
market for nice gear hub shifters. We have been bitching about this
for long enough that we need to put our money where our mouth is now
that someone listened.


* * * * * * * -Rando


That's a very good point. *I won't take much persuading to buy a new
shifter. *My 5-speed SA twist grip looks like it's made by Fisher-Price..
* The new twist grips look better, but I especially like the look of the
simple lever which can also be used as a down-tube shifter.- Hide quoted text -

- Show quoted text -


I've been using Sturmey Archer's rapid fire style shifter on my 5
speed hub for almost 3 years now.

http://i45.tinypic.com/2430pza.jpg
Definitely a worthwhile upgrade over the rotary style which I was
using previously.
  #14  
Old November 30th 09, 12:40 AM posted to rec.bicycles.tech
pdxrandonneur
external usenet poster
 
Posts: 36
Default Sram i-Motion 3 Speed Coaster Review

On Nov 28, 9:41*am, RonSonic wrote:
snip

http://jtekengineering.com/jtek_bar-end_shifter.htm

Good to see that Jtek is back.



-Rando
  #15  
Old December 9th 09, 11:36 PM posted to rec.bicycles.tech
pdxrandonneur
external usenet poster
 
Posts: 36
Default Sram i-Motion 3 Speed Coaster Review

On Nov 25, 2:35*pm, pdxrandonneur wrote:
* Gear hub fans have never had it so good. With the formidable
maturity and reasonable prices of the Shimano 8 speeds, the
renaissance going on over at Sturmey-Archer and radical new (or very
old) designs like the Nuvinci, it is easy to overlook SRAM’s new three
speed. For three speed lovers, that would be a major mistake. This is
one of the best, if not THE best, ever made. I have ridden many three
speeds over the years, and loved them all (except for that 333 hub),
but I have never had as much fun as I am having on the SRAM.

Two caveats:

#1-This is the common complaint about gearhubs, but the grip**** is
God Awful. The mechanism is so rough that I though it was broken when
I first installed it. After some lubrication and riding in it has
improved somewhat, but it still feels like you are breaking something
when you shift. The barrel adjuster set up is even more annoying than
the ones on nexus shifters. The grip part has come off in my hand
twice already (it is mounted on drop bars). I don’t expect the shifter
to last two years. I confess that I loathe grip**** in every form, but
SRAM has made much nicer ones than this. The hub deserves better. The
only good things that can be said about it are that it works and is
very simple to set up (credit for this belongs with the hub itself).
As impressed as I am with IM3, there is *NO WAY* I would pay $400 for
an IM9 and have to deal with a shifter this poor on a nine speed, and
I wonder if the complaints about that hub being loud and grindy aren’t
caused by the crap cheap shifter failing to pull cable correctly. A
trigger shifter has been sighted in a photo of a cannondale prototype,
but there is no evidence of that shifter being available aftermarket.
The good news is that the cable pull is about 6mm, less than a
Sturmey, so with due care and some fiddling it should be possible to
adapt one of Sturmey’s new bar end shifters. All that said, it is a
three speed and just about any shifter will do just fine on such.

#2-Imotion distribution runs from bad to terrible in the states, even
more so for small parts. I almost had to cancel my wheel build when
the shop couldn’t find a shifter. After calling seven bike shops here
in _bicycle_crazy_ Portland, Oregon I managed to find one that had a
distributor with a shifter in stock. Shops that could not get the
shifter included two that specialize in gear hub bikes and three that
stock the Imotion equipped Swobos. SRAM’s “just in time” distribution
system means that when parts are out of stock it can be just a really
loooong time before they come in again. This problem is worse with the
IM9 as it needs its own special cogs. All that said, SRAM has actually
brought their product to market (I’m looking at you Sturmey-Archer)
and they didn’t try to charge me extra for a bunch of small parts that
should come with the hub to begin with.

*If the Alfine is the Death Star of gearhubs, this is the Millennium
Falcon. She may not look like much, but she's got it where it counts.
(I guess this makes the S3X the X-wing: you better be a Jedi knight to
be an early adopter, and you will probably have to use the force to
actually buy one.) Under the discrete steel shell is a three speed
mechanism perfected and purged of every bug and flaw, fully matured,
tough as a panzer and solid as a single cog. Shifting is perfect, and
after a week of trying to foul the hub I managed to induce a single
pawl skip during a shift under heavy load, and was unable to induce it
again. No waiting for the hub to engage, no pedaling through a grindy
zone, no neutral, just an instant shift. The shift cable linkage is a
huge improvement over the click box, cassette joint, and bell crank,
with better protection than an axle chain. A cable comes out of the
hub and connects to your shift cable, making tire changes no more
difficult than on any other bolt on hub. As the hub does not use A/R
washers, you can position the shift arm in any direction you like
(anyone know why this hub doesn’t need them?). The unity gear feels
like a single cog and I find the efficiency hit in 1st & 3rd to be
unnoticeable. SRAM’s T3 was the most efficient hub of its generation,
and as this hub seems to be an all around improvement it is a safe bet
that this is the most efficient gear hub available. Due to the problem
of small cog inefficiency, the top gear in this hub may actually be
more efficient than the top gear on a modern derailleur set up. With a
Sugino chain ring and Izumi chain I had no problem setting up a fixie-
tight chain line, with no drag or binding. The coaster brake has more
power than the roller brake it replaced, without the dreaded fade
effect. It creaked once or twice the first day and has been silent
since. It has enough play to be ridden over trails, dropped off of
curbs and even down stairs with engaging unintentionally, and enough
power to throw my 1.5 inch Schwalbe marathon into a skid under all
conditions.
*While Sturmey-Archer is the hands down winner for style and variety,
and the Shimano hubs are far more available, this is the hub to buy
for hard use, be it sprinting of off-roading, and I really recommend
this hub to fixie riders. Let the hipsters find out the hard way if
the S3X has teething issues. The mechanism is perfect and the coaster
will make your brakeless track bike street legal and at least slightly
less kamikaze to ride in traffic.


Just to follow up, it is now below freezing here in portland and the
grip**** is having problems refusing to downshift. It seems that the
cable is sticking in the cable housing, something I have never had
happen before because of cold weather. The hub itself seems unaffected
by the temperature. Thus this hub is not recommended for cold weather
riding. Don't they have cold weather in germany?

-Rando

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: DUOMATIC 2 Speed Coaster Brake Hub Peter Schwar Marketplace 3 December 3rd 09 04:12 PM
Nexus 7 speed coaster brake questions [email protected] Techniques 2 June 6th 07 07:59 AM
WTB: 3 speed coaster brake hub 28H [email protected] Marketplace 3 October 7th 06 03:00 AM
SRAM 5-speed internal gear coaster brake hub Bruce Lange Marketplace 0 May 28th 06 08:08 PM
9 speed sram shifter with 8 speed sram derailleur brent Techniques 1 October 30th 03 03:12 AM


All times are GMT +1. The time now is 09:40 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.