A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

11 speed Cranks?



 
 
Thread Tools Display Modes
  #1  
Old July 7th 20, 11:44 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 884
Default 11 speed Cranks?

Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?
Ads
  #2  
Old July 8th 20, 08:29 AM posted to rec.bicycles.tech
Lou Holtman[_5_]
external usenet poster
 
Posts: 826
Default 11 speed Cranks?

On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?


If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou
  #3  
Old July 8th 20, 01:31 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default 11 speed Cranks?

On 7/8/2020 2:29 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?


If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou


We were told by Campagnolo USA a few years ago that the
Eleven rings were the same as Ten rings until the label was
applied, They measure identical thickness.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #4  
Old July 8th 20, 01:58 PM posted to rec.bicycles.tech
Lou Holtman[_5_]
external usenet poster
 
Posts: 826
Default 11 speed Cranks?

On Wednesday, July 8, 2020 at 2:31:27 PM UTC+2, AMuzi wrote:
On 7/8/2020 2:29 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?


If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou


We were told by Campagnolo USA a few years ago that the
Eleven rings were the same as Ten rings until the label was
applied, They measure identical thickness.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


I thought it was the spacing between the rings that changed a bit. Anyway it doesn't matter.

Lou
  #5  
Old July 8th 20, 07:05 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default 11 speed Cranks?

On 7/8/2020 7:58 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 2:31:27 PM UTC+2, AMuzi wrote:
On 7/8/2020 2:29 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?

If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou


We were told by Campagnolo USA a few years ago that the
Eleven rings were the same as Ten rings until the label was
applied, They measure identical thickness.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


I thought it was the spacing between the rings that changed a bit. Anyway it doesn't matter.

Lou


Yes the crank arm spacing is different. When you need a new
Ten chainring, buy the Eleven because those are actually
available.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #6  
Old July 8th 20, 10:20 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 884
Default 11 speed Cranks?

On Wednesday, July 8, 2020 at 11:05:12 AM UTC-7, AMuzi wrote:
On 7/8/2020 7:58 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 2:31:27 PM UTC+2, AMuzi wrote:
On 7/8/2020 2:29 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?

If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou


We were told by Campagnolo USA a few years ago that the
Eleven rings were the same as Ten rings until the label was
applied, They measure identical thickness.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


I thought it was the spacing between the rings that changed a bit. Anyway it doesn't matter.

Lou


Yes the crank arm spacing is different. When you need a new
Ten chainring, buy the Eleven because those are actually
available.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #7  
Old July 8th 20, 10:23 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 884
Default 11 speed Cranks?

On Wednesday, July 8, 2020 at 2:20:59 PM UTC-7, wrote:
On Wednesday, July 8, 2020 at 11:05:12 AM UTC-7, AMuzi wrote:
On 7/8/2020 7:58 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 2:31:27 PM UTC+2, AMuzi wrote:
On 7/8/2020 2:29 AM, Lou Holtman wrote:
On Wednesday, July 8, 2020 at 12:44:43 AM UTC+2, wrote:
Is there a spacing difference between a 10 and an 11 speed crank? Pushing another speed in there I thought was done by narrowing the chain and not the crank ring spacing?

If I can remember correctly there is a small difference, but I used a 11 speed chain on a 10 speed crank without problems (Campy).

Lou


We were told by Campagnolo USA a few years ago that the
Eleven rings were the same as Ten rings until the label was
applied, They measure identical thickness.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971

I thought it was the spacing between the rings that changed a bit. Anyway it doesn't matter.

Lou


Yes the crank arm spacing is different. When you need a new
Ten chainring, buy the Eleven because those are actually
available.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


I weighed the Campy Cranks and they were lighter than the other carbon fiber cranks I weighed. Even with that heavy steel shaft and large locking bolt. So Hopefully the Di2 will work with it.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS Ultegra 10 Speed cranks 172.5's +BB Joe Kallal Marketplace 0 August 3rd 06 05:37 AM
For Trade: DA 172.5 cranks for DA 175, 9 speed [email protected] Marketplace 0 July 18th 05 10:33 PM
WTB: Shimano 600 8-speed cranks Mike Marketplace 0 May 19th 05 02:05 PM
Using a 10 speed Daytona chainring with Record 10 cranks in 9 speed drivetrain [email protected] Techniques 3 March 21st 05 08:26 AM
Campy Centaur 10 speed cranks [email protected] Marketplace 0 December 12th 04 03:06 AM


All times are GMT +1. The time now is 11:48 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.