|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Koxx hub KH Rim KH Frame
Hey guys, i'm gunna start buying my unicycle in parts. i've searched, but didnt get a definitive answer. will the KH frame fit a koxx isis hub with no problems? Where is the new KH 19" (or 20", whichever it is) available from? do you guys think a kh frame with a koxx hub and kh rim is a good trials setup? open to all suggestions, thanks. -- iridemymuni Evan Byrne wrote: hope you like my super crappy present, but hey, you said you needed a wrench. ~~hold bananas and chug counterfeit tobasco for christ~~ 'Bike Coalition!!' (www.bikecoalition.com) ------------------------------------------------------------------------ iridemymuni's Profile: http://www.unicyclist.com/profile/11900 View this thread: http://www.unicyclist.com/thread/52577 |
Ads |
#2
|
|||
|
|||
Koxx hub KH Rim KH Frame
iridemymuni wrote: Hey guys, i'm gunna start buying my unicycle in parts. i've searched, but didnt get a definitive answer. will the KH frame fit a koxx isis hub with no problems? Where is the new KH 19" (or 20", whichever it is) available from? do you guys think a kh frame with a koxx hub and kh rim is a good trials setup? open to all suggestions, thanks. Stealing my idea is not funny. I was first. No that's a fine STRONG setup. I have the same excepte the KH frame, it's not out yet. But when it's out I will have it the first week. PM -- Probailer2 john_childs Mmmmm... Sexy welds. ------------------------------------------------------------------------ Probailer2's Profile: http://www.unicyclist.com/profile/11034 View this thread: http://www.unicyclist.com/thread/52577 |
#3
|
|||
|
|||
Koxx hub KH Rim KH Frame
I have that setup and its really good. The only problem is if you have the alu koxx cranks you have like nothing to stand on for crank rolls and wraps and stuff. -- president_luke ------------------------------------------------------------------------ president_luke's Profile: http://www.unicyclist.com/profile/11036 View this thread: http://www.unicyclist.com/thread/52577 |
#4
|
|||
|
|||
Koxx hub KH Rim KH Frame
i was going to get the white widow but i heard the rim wasn't that great. i got the idea for it a few months ago when somebody else was talking about how this would be a better setup so i'm going for it. coincidental you are getting it too, how cool! how are you liking the hub/cranks so far? q factor isn't a problem? i can't wait for the frame to come out, yaaaay -- iridemymuni Evan Byrne wrote: hope you like my super crappy present, but hey, you said you needed a wrench. ~~hold bananas and chug counterfeit tobasco for christ~~ 'Bike Coalition!!' (www.bikecoalition.com) ------------------------------------------------------------------------ iridemymuni's Profile: http://www.unicyclist.com/profile/11900 View this thread: http://www.unicyclist.com/thread/52577 |
#5
|
|||
|
|||
Koxx hub KH Rim KH Frame
iridemymuni wrote: i was going to get the white widow but i heard the rim wasn't that great. i got the idea for it a few months ago when somebody else was talking about how this would be a better setup so i'm going for it. coincidental you are getting it too, how cool! how are you liking the hub/cranks so far? q factor isn't a problem? i can't wait for the frame to come out, yaaaay The hubset is very good. I don't mind the less Q-factor. If it's strong then it's fine with me PM -- Probailer2 john_childs Mmmmm... Sexy welds. ------------------------------------------------------------------------ Probailer2's Profile: http://www.unicyclist.com/profile/11034 View this thread: http://www.unicyclist.com/thread/52577 |
#6
|
|||
|
|||
Koxx hub KH Rim KH Frame
Here's what I would do: The Koxx hub/crankset is uber strong, less known, but still damn good is Qu-Ax, the KH 2005 cranks arn't too good so that wouldn't be a good choice, the new KH cranks however should be much stronger so you might want to wait for them. The KH rim is pretty strong, stronger than the Koxx rim probably, but Rocco uses the VIZ rim, which is a drilled 36h rim that is 46mm wide, it's stronger than the Koxx rim. [image: http://vizbikes.com/newrim19b.jpg] You can get it at www.vizbikes.com And I'd most deffinatly go for the KH frame, it's a very good frame! Cheers, Dustin -- DustinSchaap Sponsored by 'MUNICYCLE.COM' (http://municycle.com) and 'SEMCYCLE' (http://semcycle.nl) ● 10km u19 ● marathon u19 ● expert marathon "I want bigger nipples." - *Roger Davies* "Can I quote you on that?" - *Paul Royle* ------------------------------------------------------------------------ DustinSchaap's Profile: http://www.unicyclist.com/profile/12614 View this thread: http://www.unicyclist.com/thread/52577 |
#7
|
|||
|
|||
Koxx hub KH Rim KH Frame
i've got my heart set on the koxx hub. but i know the other ones are fantastic aswell. that looks like a freaking cool rim. does it get flat spots easily? i'll get that if it's good and can be gotten in australia -- iridemymuni Evan Byrne wrote: hope you like my super crappy present, but hey, you said you needed a wrench. ~~hold bananas and chug counterfeit tobasco for christ~~ 'Bike Coalition!!' (www.bikecoalition.com) ------------------------------------------------------------------------ iridemymuni's Profile: http://www.unicyclist.com/profile/11900 View this thread: http://www.unicyclist.com/thread/52577 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Designing a custom Trials frame. I need your help and ideas. | Sponge | Unicycling | 14 | August 18th 06 08:45 PM |
Road Frame Closeouts (ad) | John Dacey | Marketplace | 0 | November 16th 05 09:22 PM |
Road Frame Specials (ad) | John Dacey | Marketplace | 0 | November 11th 05 05:11 PM |
FS: NOS 55cm Schwinn Peloton frame, fork, stem: $225 shipped | Frank | Marketplace | 0 | August 3rd 05 03:01 PM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |