|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
protecting my hands
On Sun, 31 Aug 2003 23:41:14 +0800, Marian Rosenberg
wrote: Dan Daniel wrote: On Sun, 31 Aug 2003 17:10:52 +0800, Marian Rosenberg wrote: How does one go about getting a bike that is a good fit? SOmeone posted this link, and it seems pretty good- http://www.peterwhitecycles.com/fitting.htm Some people ride with a tight grip when it isn't needed. Pay attention and see if you can relax your grip, arms, and shoulders. Relazing definitely helps on the non bumpy fast riding conditions. I'm not too good at forcing relaxation but, yesterday's ride after getting a massage was almost as wonderful as the massage. I was kind of semi-liquid and my bike was an extension of myself. Great feeling, isn't it? That's how it should be all the time. Part of why I am pariticularly noticing the pain is because I have been playing with the wonderful balance of my new bike and, traffic permitting, going 5 and 10 minutes at a stretch with hands nowhere near the handlebars. Do you do work or activites that put you at risk for carpal tunnel or repetitive stress injury? I wonder if the bike pain is aggravating a condition that comes from another activity. Think of your arms as shock absorbers, not tie rods. When I hit potholes and bumps, I relax my grip, not tighten it. You don't want to take all of the impact force on your hands. Okay. I KNOW I haven't been doing this. I've been tightening my grip in expectation of the possibility of loss of control. -M Someone else mentioned using your legs, also. Rise off the seat just a touch, relax the grip, and let the legs take any impact. I don't let my arms go totally limp, of course. I'm prepared to have to force the handlebars and react to the front wheel being twisted and jolted. |
Ads |
#12
|
|||
|
|||
protecting my hands
Dan Daniel wrote:
On Sun, 31 Aug 2003 23:41:14 +0800, Marian Rosenberg wrote: Dan Daniel wrote: On Sun, 31 Aug 2003 17:10:52 +0800, Marian Rosenberg wrote: How does one go about getting a bike that is a good fit? SOmeone posted this link, and it seems pretty good- http://www.peterwhitecycles.com/fitting.htm duly noted. Some people ride with a tight grip when it isn't needed. Pay attention and see if you can relax your grip, arms, and shoulders. Relazing definitely helps on the non bumpy fast riding conditions. I'm not too good at forcing relaxation but, yesterday's ride after getting a massage was almost as wonderful as the massage. I was kind of semi-liquid and my bike was an extension of myself. Great feeling, isn't it? That's how it should be all the time. I'm not normally in a semi-liquid state of being. I can see the bike as extension of self being a good thing. However, achieving the semi-liquid state is not necessarily easy. Part of why I am pariticularly noticing the pain is because I have been playing with the wonderful balance of my new bike and, traffic permitting, going 5 and 10 minutes at a stretch with hands nowhere near the handlebars. Do you do work or activites that put you at risk for carpal tunnel or repetitive stress injury? I wonder if the bike pain is aggravating a condition that comes from another activity. I'm a comptuer junkie and I've been a touch typist for 15 years now. When there is soreness, the wrists aren't nearly so sore as the palms of the hands are. -M |
#13
|
|||
|
|||
protecting my hands
In article ,
Marian Rosenberg writes: I try not to abuse my bicycle. But, the best places to ride in the bicycle lanes are already taken by other bicycles creeping along at 5 and 6 kilometers an hour. This means going over manhole covers, and catching the occasional pothole. Think "airiness". Be meringue. Set your saddle height so you're sort of between sitting and standing. Whatever type of bike on gets -- comfort, road, hybrid or MTB -- one should be able to readily get a sense of lifting off the saddle when pedaling -- or at least being able to. Saddle-suck ... sux. If your bike config feels like it's making you sit down like in an easy chair, it's very wrong. Exhale so you weigh less when going over those bumps :-) It doesn't hurt to lift off the saddle and let the elbows & knees flex when they need to, too. But potholes are serious bizness. Best thing to avoid those is to ride further out from the curb, and in the part of the road where potholes are less likely to occur. Otherwise, potholes can mess up dental work real bad. But just be light on the bike. I know it sounds glib, but it really is the answer. Honestly. The bike doesn't wear you -- you wear it. At least, that's how it should be. Become one with the air that fights against you. That's all I can say. It works. I dunno. I't probably all coming out wrong, and I'm annoying you. But I don't mean to. But riding is such a "feeling"-oriented thing. That makes it difficult to literally describe. cheers, Tom -- -- Powered by FreeBSD Above address is just a spam midden. I'm really at: tkeats [curlicue] vcn [point] bc [point] ca |
#14
|
|||
|
|||
protecting my hands
In article ,
Kevan Smith /\/\ writes: I don't stand up for anything but huge bumps. The average bumps of the road I just relax and roll right over. My seatpost is a couple of microns away from optimal thickness. So for every seated bump I hit, I pound it down so much the further. Tomorrow I've gotta get to Our Community Bikes!, and see if they've got a better (thicker) seatpost for me. And some pedals for the mixte. The binder-bolt thing gets old, real fast, with a wrongly- sized seatpost. Good ol' shiny steel seatpost, though. It just needs the right bike to stick it in. Maybe I can score a steel rack while I'm at it. (I hate aluminum racks.) cheers, Tom --- Above address is just a spam midden. I'm really at: tkeats [curlicue] vcn [point] bc [point] ca |
#15
|
|||
|
|||
protecting my hands
On Sun, 31 Aug 2003 17:10:52 +0800, Marian Rosenberg from wrote:... Other than slowing down, and avoiding bumps in the road, is there anything I can do to protect my hands? Kevan Smith replied: I assume you have padded gloves already. Also, don't take the force of the blow with your hands and arms. When you see a bump coming, relax and put your weight on your butt. Your hands and arms should just put enough force on the bars to maintain steering control. Have you changed the position of you handlebars? 1. With a traditional headset, you could raise or lower the bars -- providing you don't raise the quill past the "maximum height". With a threadless headset, you would need to move spacers or change the stem. 2. You could loosen the bolt that holds the handlebars and rotate them. By rotating handlebars up or down, you would change slightly your wrist angle and increase (or decrease) your comfort. You could also change the handlebar grips. If you have the "slippery rubber" kind, grips with better friction would help your hands because you won't have to hold the handlebars that tightly. Regards, Michel Gagnon |
#16
|
|||
|
|||
protecting my hands
Followup -
Despite owning a pair, I have yet to try bicycle gloves. They aren't part of my morning grab the keys and camera bag ritual ... yet. So, this morning and yesterday morning I was halfway to breakfast when I realized I had forgotten the gloves. I also have not managed to get foam grips for the handlebars yet. I plan to go looking for some this weekend in Beijing. I am following the instructions about relaxing a bit more and loosening the grip. Just from that slight behavior modification the pain reduction has been extreme. I'm also trying a new way of bicyling in rush hour. I pick a bicyclist that is going a reasonable speed and I follow him as he weaves through traffic. Every so often the bicyclist will do something that I'm not yet confident enough to try and I will have to slow down to the ambient speed until I find someone else to follow. This keeps me in the middle of the bike lanes and away from the worst of the bumps. -M |
#17
|
|||
|
|||
protecting my hands
Marian Rosenberg wrote in message .. .
Followup - Despite owning a pair, I have yet to try bicycle gloves. They aren't part of my morning grab the keys and camera bag ritual ... yet. So, this morning and yesterday morning I was halfway to breakfast when I realized I had forgotten the gloves. I find I get really sore hands if I don't use the gloves, with the gloves things are great. I am following the instructions about relaxing a bit more and loosening the grip. Just from that slight behavior modification the pain reduction has been extreme. Great! I'm also trying a new way of bicyling in rush hour. I pick a bicyclist that is going a reasonable speed and I follow him as he weaves through traffic. Every so often the bicyclist will do something that I'm not yet confident enough to try and I will have to slow down to the ambient speed until I find someone else to follow. This keeps me in the middle of the bike lanes and away from the worst of the bumps. While not a bad idea to learn from following more experienced cyclists, the person you are following could also be making dangerous moves which you don't necessarily want to copy. Remember the keys are to be visible, predictable (weaving in and out is often not predictable) and to behave like you would if you were driving a motor vehicle. But do try to find the smoothest pavement to ride on. Are the bike lanes there physically separated from vehicle lanes, or is it just a white stripe? If it is striped to pass a slower cyclist, signal your intent to pass them, shoulder check and move into the road lane to go around them. Never try to pass another cyclist on the curb side. (right in NA) If a bump is unavoidable I find it reduces the shock to stand off the seat a little bit as I go over. This is made easier by getting clips for your pedals (assuming they aren't the clipless kind) Tanya |
#18
|
|||
|
|||
protecting my hands
"Marian Rosenberg" wrote in message ... Followup - Despite owning a pair, I have yet to try bicycle gloves. They aren't part of my morning grab the keys and camera bag ritual ... yet. They will be, right after you hit the pavement. Roadrash on the hands is really painful. In my experiance gloves are more important than a helmet. Len |
#19
|
|||
|
|||
protecting my hands
On Sun, 31 Aug 2003 17:10:52 +0800, Marian Rosenberg
wrote: I did not notice this happening at all on my last bicycle. Of course, as my last bicycle was a substantially cheaper bike I wasn't quite as likely to ride fast and furious. (for local values of fast and furious, usually I am going between 15 and 20 kph) My new bike is a Giant Athena. Don't try looking on their website, unless you read Chinese, you won't find any specs on it. When I find myself crashing through a pothole or going over railroad tracks the banging and thudding the handlebars do end up making my hands sore. They aren't showing bruises but they are definitely feeling tender. Other than slowing down, and avoiding bumps in the road, is there anything I can do to protect my hands? At the store where I got my new bike all of the bikes I saw with shocks weren't Giant or Emelle or any other recognizable international brand. After a year on a Chinese-made bike I wanted something a little sturdier. -M Another thing to consider is to check to see if the tires you have are the widest that will fit on your bike. Ask at the local bike shop. Wide tires will absorb more shock then thin ones. Also, it is OK to change just the front one if $ is an issue. Air pressure in the tires is another consideration. Just enough to avoid pinch flats. If your tires are fairly wide...say 35mm then try 50 or 60 psi (3.5 to 4 Kg/cm square) in the front with a little more in the rear is a good starting place. If tires are wider, use lower pressure, if narrower, use higher. Steve Shapiro |
#20
|
|||
|
|||
protecting my hands
Tom Keats wrote: In article , Marian Rosenberg writes: Other than slowing down, and avoiding bumps in the road, is there anything I can do to protect my hands? No. At the store where I got my new bike all of the bikes I saw with shocks weren't Giant or Emelle or any other recognizable international brand. After a year on a Chinese-made bike I wanted something a little sturdier. Norco's are really sturdy. Usually the stock forks (usually cheap-o RST's) suck the big one, though. They'll blow their tops off on the slightest rut. Marzocchi's are nice. Peel off a couple of yards off the paycheque for the bike and another yard for the fork, and your started, if you want suspension and snob appeal. Then there's wheels. I'm riding around happily on a foundling Norco Bigfoot w/ no suspension, and nondescript Araya rims on Weinmann hubs. She serves me well. I don't complain 'bout 'er, and she don't complain 'bout me. Me & my bike have an understanding. If my hands hurt, my bike hurts, too. Anthropomorphism, 'n all that. But it serves well as a means of developing a gentle touch for mechanical parts. cheers, Tom -- -- Powered by FreeBSD Above address is just a spam midden. I'm really at: tkeats [curlicue] vcn [point] bc [point] ca Me and my aging Norco Bush Pilot say "Amen" to all that! Bernie |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
protecting saddle + post from theft? | Sanjay Punjab | General | 13 | August 8th 03 02:27 PM |
Bike sizing | Bob M | General | 17 | August 3rd 03 01:35 PM |