A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Let the Laughing Begin



 
 
Thread Tools Display Modes
  #21  
Old September 6th 17, 08:07 PM posted to rec.bicycles.tech
Duane[_3_]
external usenet poster
 
Posts: 1,900
Default Let the Laughing Begin

On 06/09/2017 2:59 PM, Jeff Liebermann wrote:
On Wed, 6 Sep 2017 11:02:12 -0700 (PDT), Doug Landau
wrote:

Quantity is my substitute for quality.


So, to know the exact pressure at which his tires are
inflated, Tom should own a dozen guages, apply
them all, and average the results?


Sure. The errors tend to random, some high, some low, some large,
some small, etc. When a large number of measurements are averaged,
the result tends to be fairly close to reality. At least that's what
some climate researchers claimed when they averaged the results of
many prehistoric temperature and CO2 proxies, each of which were
suspected of being inaccurate, and produced an average which the was
declared accurate.

Actually, it would be more interesting if we took pressure readings at
various times of the day. If you set your tire pressure to some
number on a cold morning, and then go for a ride in the hot sun, your
tire pressure will increase. Strictly speaking, one needs to be
seated on the bicycle in order to get an accurate measurement or
proper setting. That might be a bit awkward unless you're a
contortionist. It might be instructive (and amusing) to attach a
BlueGoof wireless tire pressure gauge and data logger to a wheel and
watch the variations in pressure as the bicycle bounces down the road
or does aerobatics. I suspect that you'll find large variations,
which should make you wonder why anyone bothers to set the tire
pressure more accurately than hard, firm, mush, soft, and flat.

Math, numbers, formulas, and calculations:
http://www.velonews.com/2017/03/bikes-and-tech/technical-faq-science-tire-pressure-rim-width-heat-buildup_433214
Math hates me.



Or just buy a decent pump and forget about it.
Ads
  #22  
Old September 6th 17, 10:10 PM posted to rec.bicycles.tech
Doug Landau
external usenet poster
 
Posts: 1,424
Default Let the Laughing Begin

On Wednesday, September 6, 2017 at 12:07:47 PM UTC-7, Duane wrote:
On 06/09/2017 2:59 PM, Jeff Liebermann wrote:
On Wed, 6 Sep 2017 11:02:12 -0700 (PDT), Doug Landau
wrote:

Quantity is my substitute for quality.


So, to know the exact pressure at which his tires are
inflated, Tom should own a dozen guages, apply
them all, and average the results?


Sure. The errors tend to random, some high, some low, some large,
some small, etc. When a large number of measurements are averaged,
the result tends to be fairly close to reality. At least that's what
some climate researchers claimed when they averaged the results of
many prehistoric temperature and CO2 proxies, each of which were
suspected of being inaccurate, and produced an average which the was
declared accurate.

Actually, it would be more interesting if we took pressure readings at
various times of the day. If you set your tire pressure to some
number on a cold morning, and then go for a ride in the hot sun, your
tire pressure will increase. Strictly speaking, one needs to be
seated on the bicycle in order to get an accurate measurement or
proper setting. That might be a bit awkward unless you're a
contortionist. It might be instructive (and amusing) to attach a
BlueGoof wireless tire pressure gauge and data logger to a wheel and
watch the variations in pressure as the bicycle bounces down the road
or does aerobatics. I suspect that you'll find large variations,
which should make you wonder why anyone bothers to set the tire
pressure more accurately than hard, firm, mush, soft, and flat.

Math, numbers, formulas, and calculations:
http://www.velonews.com/2017/03/bikes-and-tech/technical-faq-science-tire-pressure-rim-width-heat-buildup_433214
Math hates me.



Or just buy a decent pump and forget about it.


Better yet just use any floor pump with a guage and forget about it.
  #23  
Old September 6th 17, 10:52 PM posted to rec.bicycles.tech
Frank Krygowski[_2_]
external usenet poster
 
Posts: 7,511
Default Let the Laughing Begin

On Wednesday, September 6, 2017 at 2:02:15 PM UTC-4, Doug Landau wrote:
Quantity is my substitute for quality.


So, to know the exact pressure at which his tires are inflated, Tom should own a dozen guages, apply them all, and average the results?


Yes, of course. But keep in mind that each time a gauge is used, it causes a tiny bit of air to escape, which results in a tiny pressure loss. So rather than a simple average, it would be wise to plot the results in order, then do a best-fit computation to help account for that gradual pressure loss.

If you want to be accurate, that is. ;-)

- Frank Krygowski
  #24  
Old September 6th 17, 10:56 PM posted to rec.bicycles.tech
Frank Krygowski[_2_]
external usenet poster
 
Posts: 7,511
Default Let the Laughing Begin

On Wednesday, September 6, 2017 at 2:59:25 PM UTC-4, Jeff Liebermann wrote:

If you set your tire pressure to some
number on a cold morning, and then go for a ride in the hot sun, your
tire pressure will increase.


As mentioned in the past, I blew out a new and expensive tubular by leaving the bike parked in the hot southern sun. There was a huge bang, and I found a big hole in the center of the tread right at the top.

Shoulda used fenders, I guess.

- Frank Krygowski
  #25  
Old September 6th 17, 11:08 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 3,345
Default Let the Laughing Begin

On Wednesday, September 6, 2017 at 12:07:47 PM UTC-7, Duane wrote:

Or just buy a decent pump and forget about it.


As Jeff asked - what is a "decent pump"? A pump that works good on a high pressure racing bike takes forever to inflate an MTB tire. With almost all of the pumps these days using that awful filler valve https://tinyurl.com/y84dcpqn simply isn't right for other applications.

  #26  
Old September 6th 17, 11:28 PM posted to rec.bicycles.tech
Duane[_4_]
external usenet poster
 
Posts: 1,546
Default Let the Laughing Begin

Doug Landau wrote:
On Wednesday, September 6, 2017 at 12:07:47 PM UTC-7, Duane wrote:
On 06/09/2017 2:59 PM, Jeff Liebermann wrote:
On Wed, 6 Sep 2017 11:02:12 -0700 (PDT), Doug Landau
wrote:

Quantity is my substitute for quality.

So, to know the exact pressure at which his tires are
inflated, Tom should own a dozen guages, apply
them all, and average the results?

Sure. The errors tend to random, some high, some low, some large,
some small, etc. When a large number of measurements are averaged,
the result tends to be fairly close to reality. At least that's what
some climate researchers claimed when they averaged the results of
many prehistoric temperature and CO2 proxies, each of which were
suspected of being inaccurate, and produced an average which the was
declared accurate.

Actually, it would be more interesting if we took pressure readings at
various times of the day. If you set your tire pressure to some
number on a cold morning, and then go for a ride in the hot sun, your
tire pressure will increase. Strictly speaking, one needs to be
seated on the bicycle in order to get an accurate measurement or
proper setting. That might be a bit awkward unless you're a
contortionist. It might be instructive (and amusing) to attach a
BlueGoof wireless tire pressure gauge and data logger to a wheel and
watch the variations in pressure as the bicycle bounces down the road
or does aerobatics. I suspect that you'll find large variations,
which should make you wonder why anyone bothers to set the tire
pressure more accurately than hard, firm, mush, soft, and flat.

Math, numbers, formulas, and calculations:
http://www.velonews.com/2017/03/bikes-and-tech/technical-faq-science-tire-pressure-rim-width-heat-buildup_433214
Math hates me.



Or just buy a decent pump and forget about it.


Better yet just use any floor pump with a guage and forget about it.


That's my plan. So far so good.

--
duane
  #27  
Old September 7th 17, 01:23 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Let the Laughing Begin

On Wed, 06 Sep 2017 08:54:53 -0700, Jeff Liebermann
wrote:

On Wed, 06 Sep 2017 13:30:25 +0700, John B.
wrote:

On Tue, 05 Sep 2017 09:52:07 -0700, Jeff Liebermann
wrote:
At one time, I proposed a portable bicycle tire inflator consisting of
something like the automotive automatic shutoff compressor that I'm
using, with an added LiIon rechargeable battery. Or maybe powered
instead by a model airplane gasoline engine. I think I can make it
small enough to be fairly flat and pocket size. A little marketing
research indicated that nobody I asked would pay money for such a
thing but might consider building one from a kit. Very strange but I
decided that it was too risky and let the idea die a natural death.


I've always believed that a "good pump" was one with which one could
inflate the desired tire to the desired pressure :-)


Sigh. Inflate the desired tire at what temperature, with how much
effort, how quickly, to what accuracy, how big a tire, etc? What
works well for a road bicycle, might not be so good inflating an
automobile tire. What works in the shop, may not be so good during a
ride. Of course, there are specialized bicycle pumps optimized for
these and other purposes and conditions. My idea of a "good pump" is
one that will do an adequate job of inflating everything from a high
pressure racing tire (multistage pump), to an air mattress (large
volume piston or vane pump). It might look a bit weird, have
capabilities I might rarely use, probably expensive, but will work for
anything that needs inflation.


You missed the "desired tire to the desired pressure" ;-?


Here's one application for an air pump with which I'm currently
working:
https://www.amazon.com/Carburetor-detector-Replaces-Tillotson-243-504/dp/B06Y542R9S
Yes, it's an air pump. It's used to apply pressure to the carburetor
fuel inlet on a 2 stroke engine (chain saw) to determine if the needle
valve is working properly and not leaking. Apply pressure and it
should open the needle valve at about 15 psi. Let it bleed down, and
it should close again at 5 psi. Pressurized to 10 psi and dunk the
carburetor into a bowl of water while looking for leaks (air bubbles).
A "good pump" should be able to do this as well.


Yup, we used to do that. Blow into the fuel line. While nobody's
cheeks were calibrated in psi it did tell you if the needle valve was
leaking. One did have to spit a bit to get the gasoline taste out of
your mouth though. :-)

The problem here is that this is what I want, not what the GUM (great
unwashed masses) are will to buy. That makes it a "good pump" but
only for me. You may have other ideas.

--
Cheers,

John B.

  #28  
Old September 7th 17, 01:29 AM posted to rec.bicycles.tech
Doug Landau
external usenet poster
 
Posts: 1,424
Default Let the Laughing Begin

On Tuesday, September 5, 2017 at 11:26:55 PM UTC-7, John B. wrote:
On Tue, 5 Sep 2017 07:04:41 -0700 (PDT), wrote:

On Monday, September 4, 2017 at 7:32:25 PM UTC-7, John B. wrote:
On Mon, 4 Sep 2017 13:00:34 -0700 (PDT),
wrote:

Yesterday I went on a long enough ride and the weather report turned out to be incorrect enough that I was close to heat prostration near the end.

I hit a stone in the road that was invisible and it gave me a flat. As I was trying to figure out how to make the particular CO2 filler in that seat pack to work I punctured the canister and lost one of my two CO2 tubes..

Opening the front tire to remove the inner tube and replace it with the new tube a black guy who looked nearly homeless came by and said that he had a patch kit if I needed it. I thanked him but without a pump I couldn't find any leaks to patch.

When the front tube came out it was a Performance butyl tube. They were available in a 30, a 40 and a 60 mm stem length. I have bought the latex tubes because they were available in 51 mm stems. The back (which was losing air about the same as the front) is latex.

So my tires not losing air plainly isn't because of the material of the tubes.

My suspicion is the pump meter. I bought a new Silca professional pump from Andrew and it has a new (and probably much better) pressure gauge on it. This allows me to fill the tire up properly and to test the pressure more accurately than most pumps.

So it probably is pump and not inner tube material related.

Now don't say I lacked the courage to publicly correct myself when I think I was wrong. How many of you can say the same thing - John and Frank?


Actually I don't remember ever saying that you failed to correct
yourself. If memory serves what I've said was that "you are wrong".


And as usual you didn't know what you were talking about.


As someone wrote, "Reality is anything you want it to be. Just close
your eyes and let your imagination run wild."
--
Cheers,

John B.


LOL Pat Tillman!
  #29  
Old September 7th 17, 02:45 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Let the Laughing Begin

On Wed, 6 Sep 2017 17:29:34 -0700 (PDT), Doug Landau
wrote:

On Tuesday, September 5, 2017 at 11:26:55 PM UTC-7, John B. wrote:
On Tue, 5 Sep 2017 07:04:41 -0700 (PDT), wrote:

On Monday, September 4, 2017 at 7:32:25 PM UTC-7, John B. wrote:
On Mon, 4 Sep 2017 13:00:34 -0700 (PDT),
wrote:

Yesterday I went on a long enough ride and the weather report turned out to be incorrect enough that I was close to heat prostration near the end.

I hit a stone in the road that was invisible and it gave me a flat. As I was trying to figure out how to make the particular CO2 filler in that seat pack to work I punctured the canister and lost one of my two CO2 tubes.

Opening the front tire to remove the inner tube and replace it with the new tube a black guy who looked nearly homeless came by and said that he had a patch kit if I needed it. I thanked him but without a pump I couldn't find any leaks to patch.

When the front tube came out it was a Performance butyl tube. They were available in a 30, a 40 and a 60 mm stem length. I have bought the latex tubes because they were available in 51 mm stems. The back (which was losing air about the same as the front) is latex.

So my tires not losing air plainly isn't because of the material of the tubes.

My suspicion is the pump meter. I bought a new Silca professional pump from Andrew and it has a new (and probably much better) pressure gauge on it. This allows me to fill the tire up properly and to test the pressure more accurately than most pumps.

So it probably is pump and not inner tube material related.

Now don't say I lacked the courage to publicly correct myself when I think I was wrong. How many of you can say the same thing - John and Frank?


Actually I don't remember ever saying that you failed to correct
yourself. If memory serves what I've said was that "you are wrong".

And as usual you didn't know what you were talking about.


As someone wrote, "Reality is anything you want it to be. Just close
your eyes and let your imagination run wild."
--
Cheers,

John B.


LOL Pat Tillman!


:-) But even a casual reading of the "social networks" seems to prove
my point :-)
--
Cheers,

John B.

  #30  
Old September 7th 17, 03:06 AM posted to rec.bicycles.tech
Doug Landau
external usenet poster
 
Posts: 1,424
Default Let the Laughing Begin


As someone wrote, "Reality is anything you want it to be. Just close
your eyes and let your imagination run wild."
--
Cheers,

John B.


LOL Pat Tillman!


:-) But even a casual reading of the "social networks" seems to prove
my point :-)


Actually I was reacting to what I wanted to react to not exactly what you said.
What trips me out is when people say you make your own reality. Certainly it is a lovely thought and a lovely thing to say to someone seeking inspiration, and certainly the Olympic gold medalist subscribes to the theory. But where does that leave the silver medalist? Who believed and believed and believed and busted and busted and busted their ass?
Derek Porter was my first rowing hero. He was in an 8 that got a gold in 92, and was world champ in 93, IIRC, and thot 96 was his year. Look at him try to hold back the tears on the podium in 96* and again in 00.
https://www.youtube.com/watch?v=wViOIIh7pUU
https://www.google.com/search?q=Dere... cw4dTFyxb5M:

*It is well worth watching the whole race, for other reasons.

Cheers
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I was laughing. Michael Press Racing 19 July 7th 09 11:29 PM
lol, he's laughing at Ride-A-Lot..! LIBERATOR Mountain Biking 0 November 17th 06 09:40 AM
They're Laughing At Us! S o r n i General 2 March 15th 05 02:18 AM
Laughing my ass off [email protected] Racing 10 August 18th 04 03:28 AM
Laughing My Ass Off [email protected] Racing 13 August 17th 04 01:38 AM


All times are GMT +1. The time now is 03:24 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.