|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita
new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Jeff |
Ads |
#2
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
On Wed, 22 Apr 2009 20:16:05 +0800, Jeff wrote:
Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Ten-speed Shimano and when to use a spacer has me confused too. |
#3
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
On Apr 22, 6:16*am, Jeff wrote:
Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub *before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Jeff Must use the supplied with the cassette 1mm spacer. |
#4
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
On Apr 22, 6:23*am, John Forrest Tomlinson
wrote: On Wed, 22 Apr 2009 20:16:05 +0800, Jeff wrote: Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub *before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Ten-speed Shimano and when to use a spacer has me confused too. Pretty simple. Use it on every freehub body except shimano, deep splined aluminum, 10s shimano only freehub bodies, like DA wheels or 7800/7810 hubs. If it's shimano, deep and aluminum, spacer not required. On everything else it is. |
#5
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
On Wed, 22 Apr 2009 05:31:42 -0700 (PDT), "P. Chisholm"
wrote: On Apr 22, 6:23*am, John Forrest Tomlinson wrote: On Wed, 22 Apr 2009 20:16:05 +0800, Jeff wrote: Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub *before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Ten-speed Shimano and when to use a spacer has me confused too. Pretty simple. Use it on every freehub body except shimano, deep splined aluminum, 10s shimano only freehub bodies, like DA wheels or 7800/7810 hubs. If it's shimano, deep and aluminum, spacer not required. On everything else it is. Thanks. |
#6
|
|||
|
|||
Fulcrum 3 Whels and fitting a Cassette
P. Chisholm wrote: On Apr 22, 6:16 am, Jeff wrote: Just purchased a set of Fulcrum Racing 3 Wheels and I have tried to fita new Ultegra 10 Speed cassette to them. The Shimano supplied lockring bottoms out on the freehub before adding any tension to the cassette. Is a specific Fulcrum lockring required or is it a case of adding an additional spacer? The gap between the lockring and cassette appaears to be equivilent or a little bit greater than the silver flat spacersupplied with the cassette, Any assistance is appreciated. Jeff Must use the supplied with the cassette 1mm spacer. Peter, Bit confused, as usual ,I have used the supplied spacer and there is still a gap, an additional spacer is therefore required. Should the spacer be fitted to the rear of the cassette or next to the lockring. Jeff |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Do I need a special spacer for my Fulcrum racing 7 ? | Denis | Techniques | 4 | January 7th 09 05:02 PM |
Trade: Fulcrum Wheels | John Berenyi | Marketplace | 0 | September 5th 07 12:35 AM |
Fulcrum racing 3 wheels | Francisco Sanchez | Techniques | 9 | February 13th 07 04:54 AM |
What do people think of Fulcrum wheels? | Artoi | Techniques | 28 | September 7th 06 05:13 AM |
new sram cassette-fitting question | Gadgetfreaky2k | UK | 7 | March 6th 04 01:05 PM |