|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
Sheldon Brown wrote:
xkred27 wrote: snip 3) Am I going to need a special puller to work on the freewheel? Yes. Not all that special, actually, it's the most common type. The Park FR-1 shown at http://sheldonbrown.com/harris/tools.html#freewh- eelhttp://sheldonbrown.com/harris/tools.html#freewheel would be the correct unit. snip While the FR1 is the proper tool, I'd heard the FR-5 also can take of Shimano freewheels. Anyone know if the FR-5 will achieve the result? I so, is there a concern of breaking/stripping something using a nearfi tool? I've got 3-6 mounted Shimano freewheels so if not I'll need pic up an FR-1 sooner or later - |
Ads |
#22
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
dianne_1234 wrote:
Not SGS. SGS is only a Shimano designation. You have a SunTour derailleur. Even though it's a Suntour, don't I still need to determine whether it's "wide range", "medium range", or "short range"? If so, how? Is the ~90mm distance between the pulley bolts still a valid determinant? If so, where does the 86mm I measured between the pulley bolts on my Suntour place it? Thanks. Peter Anti-spam: a) Remove NS_ b) Change 108 to cds1 |
#23
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
dianne_1234 wrote:
Not SGS. SGS is only a Shimano designation. You have a SunTour derailleur. Even though it's a Suntour, don't I still need to determine whether it's "wide range", "medium range", or "short range"? If so, how? Is the ~90mm distance between the pulley bolts still a valid determinant? If so, where does the 86mm I measured between the pulley bolts on my Suntour place it? Thanks. Peter Anti-spam: a) Remove NS_ b) Change 108 to cds1 |
#24
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
A Muzi wrote:
So how far between pulley bolts? About 86mm And what are you trying to do here? Yeah, I think I've lost my thread here. I'm kind of a Usenet noob on top of being a biketech noob. In short, I have a ~1992 Bianchi Boardwalk I want to use to learn bike mechanics. First order of biz is I want to swap out current Shimano HG-37 7 spd freewheel for a Shimano Mega Range 11-34 7 spd freewheel. I have Suntour shifters and derailleurs, and simply wanted to know if the 11-34 megarange would work. Consensus was that it would work, so long as the RD was "wide-range". So I was asking how I could tell if my RD was "wide-range". Out of ignorance, I used the term "SGS" for wide-range, thinking the terms were interchangeable. And that's where you and I miscommunicated a bit. I *also* plan to swap out the Suntour shifters for a pair of Shimano 7 spd Shimano STX/Alivio SL-MC40 RapidFire pods. Bottom line: I want, at minimum, to replace the Shimano HG-37 7 spd freewheel with the Shimano Mega Range 7 spd 11-34 freewheel. And if possible, I'd like to add the Shimano shifters mentioned above. And probably a chain. I don't want to change the derailleurs--mostly for money reasons--at this point. Do-able? Thanks again. Peter Anti-spam: a) Remove NS_ b) Replace 108 with cds1 |
#25
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
A Muzi wrote:
So how far between pulley bolts? About 86mm And what are you trying to do here? Yeah, I think I've lost my thread here. I'm kind of a Usenet noob on top of being a biketech noob. In short, I have a ~1992 Bianchi Boardwalk I want to use to learn bike mechanics. First order of biz is I want to swap out current Shimano HG-37 7 spd freewheel for a Shimano Mega Range 11-34 7 spd freewheel. I have Suntour shifters and derailleurs, and simply wanted to know if the 11-34 megarange would work. Consensus was that it would work, so long as the RD was "wide-range". So I was asking how I could tell if my RD was "wide-range". Out of ignorance, I used the term "SGS" for wide-range, thinking the terms were interchangeable. And that's where you and I miscommunicated a bit. I *also* plan to swap out the Suntour shifters for a pair of Shimano 7 spd Shimano STX/Alivio SL-MC40 RapidFire pods. Bottom line: I want, at minimum, to replace the Shimano HG-37 7 spd freewheel with the Shimano Mega Range 7 spd 11-34 freewheel. And if possible, I'd like to add the Shimano shifters mentioned above. And probably a chain. I don't want to change the derailleurs--mostly for money reasons--at this point. Do-able? Thanks again. Peter Anti-spam: a) Remove NS_ b) Replace 108 with cds1 |
#26
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
dianne_1234 wrote:
Not SGS. SGS is only a Shimano designation. You have a SunTour derailleur. xkred27 wrote: Even though it's a Suntour, don't I still need to determine whether it's "wide range", "medium range", or "short range"? If so, how? Is the ~90mm distance between the pulley bolts still a valid determinant? If so, where does the 86mm I measured between the pulley bolts on my Suntour place it? That's pretty darn wide range. Now, what do you want to do with it? Your changer is rated to 34 teeth. -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#27
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
dianne_1234 wrote:
Not SGS. SGS is only a Shimano designation. You have a SunTour derailleur. xkred27 wrote: Even though it's a Suntour, don't I still need to determine whether it's "wide range", "medium range", or "short range"? If so, how? Is the ~90mm distance between the pulley bolts still a valid determinant? If so, where does the 86mm I measured between the pulley bolts on my Suntour place it? That's pretty darn wide range. Now, what do you want to do with it? Your changer is rated to 34 teeth. -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#28
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
A Muzi wrote:
So how far between pulley bolts? And what are you trying to do here? xkred27 wrote: 86mm. Yeah, I think I've lost my thread here. I'm kind of a Usenet noob on top of being a biketech noob. In short, I have a ~1992 Bianchi Boardwalk I want to use to learn bike mechanics. First order of biz is I want to swap out current Shimano HG-37 7 spd freewheel for a Shimano Mega Range 11-34 7 spd freewheel. I have Suntour shifters and derailleurs, and simply wanted to know if the 11-34 megarange would work. Consensus was that it would work, so long as the RD was "wide-range". So I was asking how I could tell if my RD was "wide-range". Out of ignorance, I used the term "SGS" for wide-range, thinking the terms were interchangeable. And that's where you and I miscommunicated a bit. I *also* plan to swap out the Suntour shifters for a pair of Shimano 7 spd Shimano STX/Alivio SL-MC40 RapidFire pods. Bottom line: I want, at minimum, to replace the Shimano HG-37 7 spd freewheel with the Shimano Mega Range 7 spd 11-34 freewheel. And if possible, I'd like to add the Shimano shifters mentioned above. And probably a chain. I don't want to change the derailleurs--mostly for money reasons--at this point. Yes it will shift a MegaRange with friction shifters. It won't properly index with RapisFire. So add to your shopping list an SIS compatible changer ($15 up) -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#29
|
|||
|
|||
Noob Mechanic: Re 7 spd FWheel and Derailleur Compatibility
A Muzi wrote:
So how far between pulley bolts? And what are you trying to do here? xkred27 wrote: 86mm. Yeah, I think I've lost my thread here. I'm kind of a Usenet noob on top of being a biketech noob. In short, I have a ~1992 Bianchi Boardwalk I want to use to learn bike mechanics. First order of biz is I want to swap out current Shimano HG-37 7 spd freewheel for a Shimano Mega Range 11-34 7 spd freewheel. I have Suntour shifters and derailleurs, and simply wanted to know if the 11-34 megarange would work. Consensus was that it would work, so long as the RD was "wide-range". So I was asking how I could tell if my RD was "wide-range". Out of ignorance, I used the term "SGS" for wide-range, thinking the terms were interchangeable. And that's where you and I miscommunicated a bit. I *also* plan to swap out the Suntour shifters for a pair of Shimano 7 spd Shimano STX/Alivio SL-MC40 RapidFire pods. Bottom line: I want, at minimum, to replace the Shimano HG-37 7 spd freewheel with the Shimano Mega Range 7 spd 11-34 freewheel. And if possible, I'd like to add the Shimano shifters mentioned above. And probably a chain. I don't want to change the derailleurs--mostly for money reasons--at this point. Yes it will shift a MegaRange with friction shifters. It won't properly index with RapisFire. So add to your shopping list an SIS compatible changer ($15 up) -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
Thread Tools | |
Display Modes | |
|
|