|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them?
Cheers |
Ads |
#2
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Sat, 8 Jun 2019 18:39:26 -0700 (PDT), Sir Ridesalot
wrote: I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers You can use something from a 10 speed cassette, at least I have added a 32 tooth cog from a 9 speed cassette to a 10 speed cassette with no problems. Just from my experience, the cogs on 9 and 10 speed cassettes are very close to the same thickness but the spacers between the cogs is different so you need to use the correct spacers if you are using any sort of indexed shifting. -- cheers, John B. |
#3
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Saturday, June 8, 2019 at 7:44:37 PM UTC-7, John B. wrote:
On Sat, 8 Jun 2019 18:39:26 -0700 (PDT), Sir Ridesalot wrote: I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers You can use something from a 10 speed cassette, at least I have added a 32 tooth cog from a 9 speed cassette to a 10 speed cassette with no problems. Just from my experience, the cogs on 9 and 10 speed cassettes are very close to the same thickness but the spacers between the cogs is different so you need to use the correct spacers if you are using any sort of indexed shifting. -- cheers, John B. Cassettes are made all in a set is for a purpose. The shifting lifts are aligned properly for shifting. If you mix and match be ready to get noisy shifting. I think that both of the gears you're looking for are on the normal 11-23 Shimano cassettes. But the 18 tooth I attached to a 16 tooth on the Ultegra cassette. |
#4
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Saturday, June 8, 2019 at 8:39:29 PM UTC-5, Sir Ridesalot wrote:
I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers I have OLD Campagnolo 9 speed cassettes in 13-23. They are 13-14-15-16-17-18-19-21-23 cogs. https://www.ciclisport.com/678/produ...e-shimano.aspx According to this website, there are Shimano 9 speed Junior cassettes in 14-25 and 16-24 configurations. Both have 14 and 18 cogs. Do a Google search on "shimano 9 speed junior cassette". |
#5
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Monday, June 10, 2019 at 1:29:22 PM UTC-4, Tom Kunich wrote:
On Saturday, June 8, 2019 at 7:44:37 PM UTC-7, John B. wrote: On Sat, 8 Jun 2019 18:39:26 -0700 (PDT), Sir Ridesalot wrote: I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers You can use something from a 10 speed cassette, at least I have added a 32 tooth cog from a 9 speed cassette to a 10 speed cassette with no problems. Just from my experience, the cogs on 9 and 10 speed cassettes are very close to the same thickness but the spacers between the cogs is different so you need to use the correct spacers if you are using any sort of indexed shifting. -- cheers, John B. Cassettes are made all in a set is for a purpose. The shifting lifts are aligned properly for shifting. If you mix and match be ready to get noisy shifting. I think that both of the gears you're looking for are on the normal 11-23 Shimano cassettes. But the 18 tooth I attached to a 16 tooth on the Ultegra cassette. Right now my corncob that I cobbled together and want to replace is 11 to 19 teeth and the shifting is fine even though one cog is from an 8 speed cassette. Sure is nice on the rolling hills. The front is a triple 48 -38 and iirc a 28 chainring. If it's not a 28 it's a 24 chainring. For some of the riding I do around here that setup is absolutely perfect. Cheers |
#6
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Monday, June 10, 2019 at 3:39:44 PM UTC-4, wrote:
On Saturday, June 8, 2019 at 8:39:29 PM UTC-5, Sir Ridesalot wrote: I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers I have OLD Campagnolo 9 speed cassettes in 13-23. They are 13-14-15-16-17-18-19-21-23 cogs. https://www.ciclisport.com/678/produ...e-shimano.aspx According to this website, there are Shimano 9 speed Junior cassettes in 14-25 and 16-24 configurations. Both have 14 and 18 cogs. Do a Google search on "shimano 9 speed junior cassette". Thank you VERY much for that advice and link. Cheers |
#7
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Saturday, June 8, 2019 at 9:39:29 PM UTC-4, Sir Ridesalot wrote:
I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers Update. I just looked at the Sunrace website and see that they have CSR91 9AS which has 11-12-13-14-16-18-21-24-28 teeth. They also have CSR91 9AQ which has 11-12-13-15-17-19-21-23-25 teeth. With both of those I can build up my corncob 11-19 teeth cassette AND have it indexed! Great. Cheers |
#8
|
|||
|
|||
Anyone make a 9 speed cassette with a 14 and an 18 teeth cog?
On Saturday, June 8, 2019 at 9:39:29 PM UTC-4, Sir Ridesalot wrote:
I need a 9-speed 14 teeth and a 9-speed 18 teeth cog for something I'm doing. Does anyone make a 9-speed cassette with one or the other of these cogs or even both of them? Cheers https://www.bikeparts.com/BPC162329/...assette-11-34t Item Specifications speed|range|cogs|weight: 9sp|11-34t|11,12,14,16,18,21,24,28,34|358g |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does Shimano still make an 8 speed cassette? | Jason Spaceman | Techniques | 7 | June 10th 09 12:19 AM |
Shaping Cassette Teeth | D'ohBoy | Techniques | 3 | July 2nd 07 10:55 AM |
How to fix bent cassette teeth? | Marz | Techniques | 13 | September 19th 06 06:10 AM |
Bought a 10 speed cassette instead of a 9; can I make it work? | Chris Esposito | Techniques | 6 | April 4th 05 12:59 AM |
11-32 8-speed cassette...number of teeth? | Simon Kempster | UK | 10 | August 26th 03 12:43 PM |