|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Any UK'ers got a 6 bolt 165 mm rotor for sale?
Been trying to get a disc brake set for the rear of the bike for quite a
while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! Shaun aRe - E-mail is valid if anyone wants to reply direct. |
Ads |
#2
|
|||
|
|||
"Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer |
#3
|
|||
|
|||
"Andy Chequer" wrote in message ... "Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer A 6" Hayes rotor works fine with the Hope mini's for the rear. So good in fact I switched to all Hayes. I'm now Hopeless. ;^) Gotta stick to what I know and the Hopes are a PITA to work on and find parts for. I've got a whole, used, set and a couple new 5 1/4" front rotors available. (I don't know about shipping to the UK though, pay my way to the Real Ale Wobble and I'll bring 'em with me for free :^D ) Mike |
#4
|
|||
|
|||
"Andy Chequer" wrote in message ... "Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer Well, if it's 165mm, and the same thickness (which I don't know right now), it's gotta work, no? Thanks Andy! Next beer's on me fer sure, even if it doesn't fit ',;~}~ Shaun aRe |
#5
|
|||
|
|||
"Michael Dart" wrote in message ... "Andy Chequer" wrote in message ... "Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer A 6" Hayes rotor works fine with the Hope mini's for the rear. Hmm, but 6" is only 152.5 mm, no? So good in fact I switched to all Hayes. I'm now Hopeless. ;^) Gotta stick to what I know and the Hopes are a PITA to work on and find parts for. I've got a whole, used, set and a couple new 5 1/4" front rotors available. (I don't know about shipping to the UK though, pay my way to the Real Ale Wobble and I'll bring 'em with me for free :^D ) Heheheh, yeah, if I could afford the plane ticket for ya, I'd just buy meself like, several hundred genuine Hope rotors, now wouldn't I?!? ',;~}~ Cheers! Shaun aRe |
#6
|
|||
|
|||
"Shaun" wrote in message ... "Michael Dart" wrote in message ... "Andy Chequer" wrote in message ... "Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer A 6" Hayes rotor works fine with the Hope mini's for the rear. Hmm, but 6" is only 152.5 mm, no? So good in fact I switched to all Hayes. I'm now Hopeless. ;^) Gotta stick to what I know and the Hopes are a PITA to work on and find parts for. I've got a whole, used, set and a couple new 5 1/4" front rotors available. (I don't know about shipping to the UK though, pay my way to the Real Ale Wobble and I'll bring 'em with me for free :^D ) Heheheh, yeah, if I could afford the plane ticket for ya, I'd just buy meself like, several hundred genuine Hope rotors, now wouldn't I?!? eh...it was worth a shot. They wouldn't come with my charming personality (esp. after a few pints) now would they! But seriously, I've a couple of Hope Gothic rotors that measure out to 165mm I could send you. I can't use 'em since they just clip my Hayes calipers. Email me with your address. I suppose a padded envelope wouldn't cost that much to ship to the UK. Mike |
#7
|
|||
|
|||
"Michael Dart" wrote in message ... "Shaun" wrote in message ... "Michael Dart" wrote in message ... "Andy Chequer" wrote in message ... "Shaun" wrote in message ... Been trying to get a disc brake set for the rear of the bike for quite a while - soon I'll have all but the rotor - thought I'd throw the question out here first! Brake is a pre-Mono Hope Mini! Cheers folks! I have a six bolt Hayes rotor which _may_be 165mm (I'll have to measure it). It's in good condition (one winter's use) and it's going spare as the caliper is stuffed. Not sure how it will work with a Hope, though. I'll pull it off the Zaskar and measure it for you, probably have an answer after the weekend. If suitable, it will set you back a pint of good ale. Anyone out there tried mixing rotor/caliper brands? Any luck? Andy Chequer A 6" Hayes rotor works fine with the Hope mini's for the rear. Hmm, but 6" is only 152.5 mm, no? So good in fact I switched to all Hayes. I'm now Hopeless. ;^) Gotta stick to what I know and the Hopes are a PITA to work on and find parts for. I've got a whole, used, set and a couple new 5 1/4" front rotors available. (I don't know about shipping to the UK though, pay my way to the Real Ale Wobble and I'll bring 'em with me for free :^D ) Heheheh, yeah, if I could afford the plane ticket for ya, I'd just buy meself like, several hundred genuine Hope rotors, now wouldn't I?!? eh...it was worth a shot. They wouldn't come with my charming personality (esp. after a few pints) now would they! But seriously, I've a couple of Hope Gothic rotors that measure out to 165mm I could send you. I can't use 'em since they just clip my Hayes calipers. Email me with your address. I suppose a padded envelope wouldn't cost that much to ship to the UK. Mike Cheers Mike! - E-mailed you yesterday ',;~}~ Shaun aRe |
Thread Tools | |
Display Modes | |
|
|