|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Cheap bright tail light
Just got one of these:
http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. |
#2
|
|||
|
|||
Cheap bright tail light
somebody wrote:
Just got one of these: http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. Let us know how it fares. I never had luck with these removeable slide-in holders. Eventually the lights fly off into the bushes, never to be found again. Ok, I am a mountain biker. On the last one I jammed a screw through there. Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... -- Regards, Joerg http://www.analogconsultants.com/ |
#3
|
|||
|
|||
Cheap bright tail light
Joerg wrote:
somebody wrote: Just got one of these: http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. Let us know how it fares. I never had luck with these removeable slide-in holders. Eventually the lights fly off into the bushes, never to be found again. Ok, I am a mountain biker. On the last one I jammed a screw through there. Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. -- Lou |
#4
|
|||
|
|||
Cheap bright tail light
Lou Holtman wrote:
Joerg wrote: somebody wrote: Just got one of these: http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. Let us know how it fares. I never had luck with these removeable slide-in holders. Eventually the lights fly off into the bushes, never to be found again. Ok, I am a mountain biker. On the last one I jammed a screw through there. Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. No, that is not the problem. In the days of light bulbs one could buy a sturdy metal-encased lamp that would last. Now one can't. That's the problem. -- Regards, Joerg http://www.analogconsultants.com/ |
#5
|
|||
|
|||
Cheap bright tail light
Joerg wrote:
Lou Holtman wrote: Joerg wrote: somebody wrote: Just got one of these: http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. Let us know how it fares. I never had luck with these removeable slide-in holders. Eventually the lights fly off into the bushes, never to be found again. Ok, I am a mountain biker. On the last one I jammed a screw through there. Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. No, that is not the problem. In the days of light bulbs one could buy a sturdy metal-encased lamp that would last. Now one can't. That's the problem. There are plenty metal encased lamps that last. Only not for 15 dollar. -- Lou |
#6
|
|||
|
|||
Cheap bright tail light
Lou Holtman wrote:
Joerg wrote: Lou Holtman wrote: Joerg wrote: somebody wrote: Just got one of these: http://www.fasttech.com/products/160...de-red-bicycle It is bright enough to leave retina spots. I am impressed for the $13 price. Now it's time to do some real world testing. Only nit: I would like a lower duty cycle flash for better battery life. It has a built-in lithium cell, I'm thinking of adding an external connection for a 18650 cell or pack. Let us know how it fares. I never had luck with these removeable slide-in holders. Eventually the lights fly off into the bushes, never to be found again. Ok, I am a mountain biker. On the last one I jammed a screw through there. Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. No, that is not the problem. In the days of light bulbs one could buy a sturdy metal-encased lamp that would last. Now one can't. That's the problem. There are plenty metal encased lamps that last. Only not for 15 dollar. Ones with a battery pack connection? Got an example? I have only seen motorcycle lamps like that and if needed I'll buy one. But that would require a 12V step-up converter which I have to build and which has to fit inside the light, plus roach in a switch somehow somewhere. -- Regards, Joerg http://www.analogconsultants.com/ |
#7
|
|||
|
|||
Cheap bright tail light
On 8/29/2014 5:26 PM, Joerg wrote:
Lou Holtman wrote: Joerg wrote: Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. No, that is not the problem. In the days of light bulbs one could buy a sturdy metal-encased lamp that would last. Now one can't. That's the problem. The problem is that (at least in the U.S.) few people ride at night. People think it's hideously dangerous. And of course they all have cars. So the market is small. And most of those who do ride at night tend to do it pretty rarely, only in near-ideal conditions, because they're doing it only for fun. So they tend to be pretty easy on their equipment. If it lasts only 50 hours, they'll get perhaps ten years use out of it. Also, regarding one of your specific complaints, most people don't see a need to run wires from a central battery to a taillight. AA or AAA batteries in taillights last a long, long time and are easy to buy and change. The few of us that may be light connoisseurs often tend to be reasonably good mechanics and/or machinists. We make what we want. I've got totally custom headlight mounts on three bikes (varying degrees of sophistication), and somewhat customized ones on two others. With a collection of scrap metal, a vise and drill and maybe some taps, you can do a lot. -- - Frank Krygowski |
#8
|
|||
|
|||
Cheap bright tail light
Frank Krygowski wrote:
On 8/29/2014 5:26 PM, Joerg wrote: Lou Holtman wrote: Joerg wrote: Why doesn't anyone offer a decent light set where there actually is a 2nd wired connection at the battery pack and also one at the tail light? Why do bicyclists always have to kludge in order to get good stuff? Battery powered rear lights are adding risk to cycling. Because you may not notice when they run out of juice and then a car driver may not notice you ... I'm getting a bit of tired by your complaints. Get to the drawing board and design one by yourself and let a machinist make it for you. Oh wait you are also cheap. That is the problem. No, that is not the problem. In the days of light bulbs one could buy a sturdy metal-encased lamp that would last. Now one can't. That's the problem. The problem is that (at least in the U.S.) few people ride at night. People think it's hideously dangerous. And of course they all have cars. So the market is small. And most of those who do ride at night tend to do it pretty rarely, only in near-ideal conditions, because they're doing it only for fun. So they tend to be pretty easy on their equipment. If it lasts only 50 hours, they'll get perhaps ten years use out of it. That is because hardly anyone commutes anymore which is sad. Serious commuting means including winter and then one or both trips will require lights. So 50 hours would be gone in a month or two. I run through batteries as if it was popcorn. Environmentally not so cool. Luckily the front one on the MTB is Li-Ion but one of them already starts to fade. Also, regarding one of your specific complaints, most people don't see a need to run wires from a central battery to a taillight. AA or AAA batteries in taillights last a long, long time and are easy to buy and change. You cannot get any serious light out of AAA and that's all you normally find. A 2W LED will suck AAA dry in very few hours. Cygolite has Li-Ion but then the light is in one of those chintzy snap holders so you can carry it inside to your computer. My last light with such a holder flew off half way into a ride. I heard it crash into the bush and it was gone for good. The few of us that may be light connoisseurs often tend to be reasonably good mechanics and/or machinists. We make what we want. I've got totally custom headlight mounts on three bikes (varying degrees of sophistication), and somewhat customized ones on two others. With a collection of scrap metal, a vise and drill and maybe some taps, you can do a lot. I guess that's what I'll have to do but first I'll visit the local motorcycle store because that industry is a tad better when it come to serious quality stuff. I don't mind making a light mount but I'd need some kind of light that I can securely attach to that and where bumping into it won't crack anything. Because on an MTB you must sometimes hover over the rear wheel and it's easy to bump into the tail light. Something like this with LEDs in there would be nice: http://www.amazon.com/Protective-Alu...QVDGNNEGG130D8 Many of the "modern" LED light for motorcycles are junk, just like those for bicycles. The good stuff would need to be retrofitted. -- Regards, Joerg http://www.analogconsultants.com/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bright tail light | somebody[_2_] | Techniques | 0 | July 20th 09 12:51 AM |
Bright up your advertising with a slim light box !----11 mm LED light box in China! | Gabe Vanrenen | UK | 0 | June 29th 07 05:08 AM |
Brief note: modification to create super-bright tail light | [email protected] | Techniques | 11 | January 25th 05 02:06 AM |
Looking for BRIGHT and LIGHT helmet | Jeff Potter | Techniques | 12 | November 19th 04 02:06 AM |
Daylight Bright Bicycle Tail Light | Laurence Dodd | Australia | 0 | September 17th 03 04:36 AM |