#1
|
|||
|
|||
H AND SON Plus
I have a set of wheels with these rims and utlegra hubs 32 hole. I like the rims 23 25 mm profile. As usual when I got them I did do a quick go around to make sure spoke tension ok. So after maybe 2300 miles they are doing great. My question is maybe I can ride at lower PSI and I don't give it a chance.
I run these at about 100 psi on the rear and maybe 93 ish on the front. No pinch flats I am 6'1 and about 170 pounds. What PSI would you ride these at? Sure I could just keep dropping the psi in till I go overboard but now another question. I run Conti PR 4000 II 23mm presently. I am an old school mind and the 25 just don't want to stick in my brain. Since I am due for a new set of tires should I go 25 they seem to inflate pretty close to the stated width. Then could I get even lower PSI and be better of than the 23's. I am I trying to split hairs and it does not matter. I do like a smooth ride but of course speed always in the back of my mind hate to ride slow if I can go faster. Deacon Mark Cleary |
Thread Tools | |
Display Modes | |
|
|