A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Opinions of Gates Carbon Drive system?



 
 
Thread Tools Display Modes
  #21  
Old November 17th 17, 07:12 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 6,374
Default Opinions of Gates Carbon Drive system?

On Tuesday, November 14, 2017 at 6:40:51 PM UTC-7, AMuzi wrote:
On 11/14/2017 8:01 AM, wrote:
I searched dutifully, but couldn't find a thread on this. (I believe Andre might have a bike with Carbon Drive; not sure.) Has this been discussed here?

I would be very interested to hear how the Carbon Drive system's friction losses compare to those of a chain, and how it holds up in heavy use by a serious rider.



I can't answer your question directly but the largest
difference between a belt and a chain is noise. Assuming
noise is audible inefficiency may imply an answer.

That said, both systems work and although riders swear by
and at both, I don't find either compellingly 'best', just
different.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


hmmmm how much noise different ? depends on what tires, no ? the belt draws even. does the belt last longer ? Jute suggests Gates is more responsive poss destroying the Rollnot ! and from a Volvo Estate guy


Ads
  #22  
Old November 17th 17, 07:30 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 6,374
Default Opinions of Gates Carbon Drive system?

main obstacle $$$ I'd try it but like 27" to 700 ... the significant advantage is ?


https://www.google.com/search?tbm=is...=1510942370441

http://www.bikefix.co.uk/pinion-drive

poss a limiting branded name


goo.gl/mBWr1g

what if Fred had not hit a soft spot ?




  #23  
Old November 17th 17, 07:34 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 6,374
Default Opinions of Gates Carbon Drive system?



https://www.google.com/search?tbm=is...=1510943503648
  #24  
Old November 17th 17, 08:59 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 6,374
Default Opinions of Gates Carbon Drive system?



more like, the significant advantage IS trying it

more Pope

http://theoldmotor.com/?p=148567



  #25  
Old November 17th 17, 10:45 PM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default Opinions of Gates Carbon Drive system?

On Friday, November 17, 2017 at 5:18:59 PM UTC, jbeattie wrote:
On Friday, November 17, 2017 at 8:40:18 AM UTC-8, Andre Jute wrote:
When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?


I see racks filled with shaft-drive bikes every day. http://www.galmlaw.com/wp-content/up...1/Biketown.jpg https://www.biketownpdx.com/how-it-works/meet-the-bike


If the shared bike racks in my nearest city were ever that full, I'd conclude the scheme has failed.
http://coolmainpress.com/ajwriting/p...-and-limerick/

Gates Belts would make sense in a rental fleet or a fleet left outdoors since there would be no issue of chain rusting -- and they would produce a much lighter bike than shaft-drive. The Biketown bikes weigh 59lbs -- but you can still catch air! https://vimeo.com/180757631 (the Lumberyard is an indoor bike stunt track in east PDX).


Yes, it occurred to me after sending my reply that you're responding to, without time to send another note because I had to go pick up a Black Forest Gateau for a birthday party, that the Gates Drive's fate, like the fate of many recent perfectly well-engineered innovations (I own one, Shimano's full-auto plus active suspension Di2), rests in the first instance not on consumers but on the willingness of manufacturers (hereinafter OEMs) to risk a line or a corner of one on some trick component. But, in the end, that separation is only one or two degrees, and the consumer, spending his own money, decides what survives and does not.

It all comes down to horses for courses versus churning the consumer market with the supposed latest and greatest. Some odd-ball things are good for some consumers (including institutional consumers) while others are just useless marketing ploys. I think Gates Belts, discs and a few other things fall into both camps.


Spot on, Professor.

Andre Jute
Fifty cents each way never hurt anyone's reputation for surpassing wisdom.
  #26  
Old November 17th 17, 10:52 PM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default Opinions of Gates Carbon Drive system?

On Friday, November 17, 2017 at 5:38:25 PM UTC, AMuzi wrote:
On 11/17/2017 10:40 AM, Andre Jute wrote:
On Friday, November 17, 2017 at 3:04:17 PM UTC, jbeattie wrote:
On Thursday, November 16, 2017 at 9:13:13 PM UTC-8, Andre Jute wrote:
On Thursday, November 16, 2017 at 4:25:14 PM UTC, wrote:
Sounds like the Gates Drive is a solution to a problem yet to be invented!
Andre Jute
"Because we could." isn't a reason, it's an excuse

Yes, I was thinking the same thing, Andre. So why are some of the bicycle manufacturers using it? What do they gain by making this kind of bike?

Because the people in their target market already have one or more of everything else. With a new product they might catch a few fashion victims, or even many fashion victims, what Duane calls "product differentiation". Lou took one for the team here, but not everyone knows a Lou, and some aren't even smart enough to ask him.

https://www.youtube.com/watch?featur...c4&app=desktop

OTOH: https://www.youtube.com/watch?v=DWAKtYGJZSM I thought SIS was a joke and step-in pedals, too. You have to be able to separate the wheat from the chaff. Specialized produces a lot of chaff -- but some wheat, too. The problem is early adoption, and after a few product generations, you can tell what is wheat and what is chaff pretty easily. I steered away from buying a replacement Roubaix because I didn't want active suspension, but more importantly because I didn't want to buy into proprietary hub dimensions.. It's the proprietary stuff that is a PITA.

-- Jay Beattie.


Not all products that survive are necessarily objectively the best. Vide successive Microsoft operating systems, which currently are crap copies of Apple OS, which in turn was a dead system (the bosses couldn't believe their techs were dumb enough to come up with a user-friendly interface that would them all out of work) which Xerox just gave to Apple. But Bill Gates had three advantages: primacy, massive early adoption because, third, Gates was a brilliant salesman who persuaded IBM to put his OS on their early PC's. Peanuts!

Nobody can accuse Lou or me of being technophobic when we turn thumbs down on a new component either by analysis or by trial. We've served our time in the trenches; check what's on my bike, then check what I've tested and thrown off as inadequate; or check the bikes in Lou's garage. The Gates belt in an automobile is a brilliant problem-solver but on a bicycle it is superfluous to requirements. Notice that the only two people who have actually given the Gates Drive lots of attention, one an engineer, one a premium goods marketer, have not volunteered an opinion on the most important aspect of a multi-million dollar investment: whether the Gates Drive will still be around in ten or twenty years. It's competently engineered, therefore it won't fall flat on its face, which in turn means that psycho-economic factors come into play, including irrationalities like whether its time has arrived as perceptively superior and therefore essential to new elite cyclists who may have an entirely

different outlook to those whose cycling gestalt was formed by Peugeot ten-speed racing in the 1970s.

When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?

It is of course possible to apply all the same arguments to the Rohloff hub gearbox, which is a huge success. But, actually, that was off to a slow start, and taken up by the "wrong" market, tourers rather than the intended mud pluggers. It just so happened that the particular wrong guys the first OEM fitter of the Rohloff catered for were opinionformers, and Rohloff was up and away. It's a striking example of what I'm all always trying to explain to that bonehead Krygowski, that the interpretation of random sampling statistics is an art form, not a license to lie. In this case, cyclists, asked in advance, would probably have said overwhelmingly that the Rohloff was surplus to requirements, that derailleurs always did the job adequately, etc, all the familiar arguments. Nobody would have thought of asking Utopia's tiny market what they though: they were guys who bought V12 Mercedes, so entirely out of the target market... That's the sort of irrational chance, though entirely predi

ctable to those of us with the right experience and outlook, that I see for the Gates Drive. I admire the Gates management for rolling the dice and not cutting financial corners.

Andre Jute
"I'm not a fashion victim. I just pander to them." -- The late, great Rosser Reeves in private conversation (Mr Reeves was the original model for Vance Packard's meretricious The Man in the Gray Flannel Suit)


One of the best handling, elegant and well built machines I
have ever ridden was a 1913 Pope Columbia shaft drive fixed.
Hugely expensive when new but nicely done; there's no
inherent technical barrier to shaft drive.


Quite. It's just unnecessary, except perhaps in niche markets, as Jay points out.

How much was the Pope shaft drive bike when new?

Andre Jute
So much can be concluded from comparative economics
  #27  
Old November 17th 17, 11:32 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default Opinions of Gates Carbon Drive system?

On 11/17/2017 3:52 PM, Andre Jute wrote:
On Friday, November 17, 2017 at 5:38:25 PM UTC, AMuzi wrote:
On 11/17/2017 10:40 AM, Andre Jute wrote:
On Friday, November 17, 2017 at 3:04:17 PM UTC, jbeattie wrote:
On Thursday, November 16, 2017 at 9:13:13 PM UTC-8, Andre Jute wrote:
On Thursday, November 16, 2017 at 4:25:14 PM UTC, wrote:
Sounds like the Gates Drive is a solution to a problem yet to be invented!
Andre Jute
"Because we could." isn't a reason, it's an excuse

Yes, I was thinking the same thing, Andre. So why are some of the bicycle manufacturers using it? What do they gain by making this kind of bike?

Because the people in their target market already have one or more of everything else. With a new product they might catch a few fashion victims, or even many fashion victims, what Duane calls "product differentiation". Lou took one for the team here, but not everyone knows a Lou, and some aren't even smart enough to ask him.

https://www.youtube.com/watch?featur...c4&app=desktop

OTOH: https://www.youtube.com/watch?v=DWAKtYGJZSM I thought SIS was a joke and step-in pedals, too. You have to be able to separate the wheat from the chaff. Specialized produces a lot of chaff -- but some wheat, too. The problem is early adoption, and after a few product generations, you can tell what is wheat and what is chaff pretty easily. I steered away from buying a replacement Roubaix because I didn't want active suspension, but more importantly because I didn't want to buy into proprietary hub dimensions. It's the proprietary stuff that is a PITA.

-- Jay Beattie.

Not all products that survive are necessarily objectively the best. Vide successive Microsoft operating systems, which currently are crap copies of Apple OS, which in turn was a dead system (the bosses couldn't believe their techs were dumb enough to come up with a user-friendly interface that would them all out of work) which Xerox just gave to Apple. But Bill Gates had three advantages: primacy, massive early adoption because, third, Gates was a brilliant salesman who persuaded IBM to put his OS on their early PC's. Peanuts!

Nobody can accuse Lou or me of being technophobic when we turn thumbs down on a new component either by analysis or by trial. We've served our time in the trenches; check what's on my bike, then check what I've tested and thrown off as inadequate; or check the bikes in Lou's garage. The Gates belt in an automobile is a brilliant problem-solver but on a bicycle it is superfluous to requirements. Notice that the only two people who have actually given the Gates Drive lots of attention, one an engineer, one a premium goods marketer, have not volunteered an opinion on the most important aspect of a multi-million dollar investment: whether the Gates Drive will still be around in ten or twenty years. It's competently engineered, therefore it won't fall flat on its face, which in turn means that psycho-economic factors come into play, including irrationalities like whether its time has arrived as perceptively superior and therefore essential to new elite cyclists who may have an entire

ly
different outlook to those whose cycling gestalt was formed by Peugeot ten-speed racing in the 1970s.

When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?

It is of course possible to apply all the same arguments to the Rohloff hub gearbox, which is a huge success. But, actually, that was off to a slow start, and taken up by the "wrong" market, tourers rather than the intended mud pluggers. It just so happened that the particular wrong guys the first OEM fitter of the Rohloff catered for were opinionformers, and Rohloff was up and away. It's a striking example of what I'm all always trying to explain to that bonehead Krygowski, that the interpretation of random sampling statistics is an art form, not a license to lie. In this case, cyclists, asked in advance, would probably have said overwhelmingly that the Rohloff was surplus to requirements, that derailleurs always did the job adequately, etc, all the familiar arguments. Nobody would have thought of asking Utopia's tiny market what they though: they were guys who bought V12 Mercedes, so entirely out of the target market... That's the sort of irrational chance, though entirely pre

di
ctable to those of us with the right experience and outlook, that I see for the Gates Drive. I admire the Gates management for rolling the dice and not cutting financial corners.

Andre Jute
"I'm not a fashion victim. I just pander to them." -- The late, great Rosser Reeves in private conversation (Mr Reeves was the original model for Vance Packard's meretricious The Man in the Gray Flannel Suit)


One of the best handling, elegant and well built machines I
have ever ridden was a 1913 Pope Columbia shaft drive fixed.
Hugely expensive when new but nicely done; there's no
inherent technical barrier to shaft drive.


Quite. It's just unnecessary, except perhaps in niche markets, as Jay points out.

How much was the Pope shaft drive bike when new?

Andre Jute
So much can be concluded from comparative economics


A quick search or two seems to indicate $180 when typical
annual incomes ranged $500(schoolteacher) to $600(railroad)
and the bulk of period ads show lots of name brand machines
from $15 to $30

Than again that was before the dreaded income tax...
--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #28  
Old November 17th 17, 11:46 PM posted to rec.bicycles.tech
JBeattie
external usenet poster
 
Posts: 5,870
Default Opinions of Gates Carbon Drive system?

On Friday, November 17, 2017 at 1:45:34 PM UTC-8, Andre Jute wrote:
On Friday, November 17, 2017 at 5:18:59 PM UTC, jbeattie wrote:
On Friday, November 17, 2017 at 8:40:18 AM UTC-8, Andre Jute wrote:
When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?


I see racks filled with shaft-drive bikes every day. http://www.galmlaw..com/wp-content/u...1/Biketown.jpg https://www.biketownpdx.com/how-it-works/meet-the-bike


I think that first picture was actually the drop-off spot for some portion of the city's fleet of Biketown bikes. At the racks, usage varies -- the one near my office is usually about half full, but I don't pay much attention.. I think the program is limping along, but at least it is not a drain on taxpayers -- yet. We have more than enough drains already.

-- Jay Beattie.

  #29  
Old November 18th 17, 01:16 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Opinions of Gates Carbon Drive system?

On Fri, 17 Nov 2017 16:32:53 -0600, AMuzi wrote:

On 11/17/2017 3:52 PM, Andre Jute wrote:
On Friday, November 17, 2017 at 5:38:25 PM UTC, AMuzi wrote:
On 11/17/2017 10:40 AM, Andre Jute wrote:
On Friday, November 17, 2017 at 3:04:17 PM UTC, jbeattie wrote:
On Thursday, November 16, 2017 at 9:13:13 PM UTC-8, Andre Jute wrote:
On Thursday, November 16, 2017 at 4:25:14 PM UTC, wrote:
Sounds like the Gates Drive is a solution to a problem yet to be invented!
Andre Jute
"Because we could." isn't a reason, it's an excuse

Yes, I was thinking the same thing, Andre. So why are some of the bicycle manufacturers using it? What do they gain by making this kind of bike?

Because the people in their target market already have one or more of everything else. With a new product they might catch a few fashion victims, or even many fashion victims, what Duane calls "product differentiation". Lou took one for the team here, but not everyone knows a Lou, and some aren't even smart enough to ask him.

https://www.youtube.com/watch?featur...c4&app=desktop

OTOH: https://www.youtube.com/watch?v=DWAKtYGJZSM I thought SIS was a joke and step-in pedals, too. You have to be able to separate the wheat from the chaff. Specialized produces a lot of chaff -- but some wheat, too. The problem is early adoption, and after a few product generations, you can tell what is wheat and what is chaff pretty easily. I steered away from buying a replacement Roubaix because I didn't want active suspension, but more importantly because I didn't want to buy into proprietary hub dimensions. It's the proprietary stuff that is a PITA.

-- Jay Beattie.

Not all products that survive are necessarily objectively the best. Vide successive Microsoft operating systems, which currently are crap copies of Apple OS, which in turn was a dead system (the bosses couldn't believe their techs were dumb enough to come up with a user-friendly interface that would them all out of work) which Xerox just gave to Apple. But Bill Gates had three advantages: primacy, massive early adoption because, third, Gates was a brilliant salesman who persuaded IBM to put his OS on their early PC's. Peanuts!

Nobody can accuse Lou or me of being technophobic when we turn thumbs down on a new component either by analysis or by trial. We've served our time in the trenches; check what's on my bike, then check what I've tested and thrown off as inadequate; or check the bikes in Lou's garage. The Gates belt in an automobile is a brilliant problem-solver but on a bicycle it is superfluous to requirements. Notice that the only two people who have actually given the Gates Drive lots of attention, one an engineer, one a premium goods marketer, have not volunteered an opinion on the most important aspect of a multi-million dollar investment: whether the Gates Drive will still be around in ten or twenty years. It's competently engineered, therefore it won't fall flat on its face, which in turn means that psycho-economic factors come into play, including irrationalities like whether its time has arrived as perceptively superior and therefore essential to new elite cyclists who may have an entire

ly
different outlook to those whose cycling gestalt was formed by Peugeot ten-speed racing in the 1970s.

When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?

It is of course possible to apply all the same arguments to the Rohloff hub gearbox, which is a huge success. But, actually, that was off to a slow start, and taken up by the "wrong" market, tourers rather than the intended mud pluggers. It just so happened that the particular wrong guys the first OEM fitter of the Rohloff catered for were opinionformers, and Rohloff was up and away. It's a striking example of what I'm all always trying to explain to that bonehead Krygowski, that the interpretation of random sampling statistics is an art form, not a license to lie. In this case, cyclists, asked in advance, would probably have said overwhelmingly that the Rohloff was surplus to requirements, that derailleurs always did the job adequately, etc, all the familiar arguments. Nobody would have thought of asking Utopia's tiny market what they though: they were guys who bought V12 Mercedes, so entirely out of the target market... That's the sort of irrational chance, though entirely pre

di
ctable to those of us with the right experience and outlook, that I see for the Gates Drive. I admire the Gates management for rolling the dice and not cutting financial corners.

Andre Jute
"I'm not a fashion victim. I just pander to them." -- The late, great Rosser Reeves in private conversation (Mr Reeves was the original model for Vance Packard's meretricious The Man in the Gray Flannel Suit)


One of the best handling, elegant and well built machines I
have ever ridden was a 1913 Pope Columbia shaft drive fixed.
Hugely expensive when new but nicely done; there's no
inherent technical barrier to shaft drive.


Quite. It's just unnecessary, except perhaps in niche markets, as Jay points out.

How much was the Pope shaft drive bike when new?

Andre Jute
So much can be concluded from comparative economics


A quick search or two seems to indicate $180 when typical
annual incomes ranged $500(schoolteacher) to $600(railroad)
and the bulk of period ads show lots of name brand machines
from $15 to $30

Than again that was before the dreaded income tax...


And the doctor made house calls for a dollar a visit :-)
--
Cheers,

John B.

  #30  
Old November 18th 17, 03:03 AM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default Opinions of Gates Carbon Drive system?

On Friday, November 17, 2017 at 10:32:59 PM UTC, AMuzi wrote:
On 11/17/2017 3:52 PM, Andre Jute wrote:
On Friday, November 17, 2017 at 5:38:25 PM UTC, AMuzi wrote:
On 11/17/2017 10:40 AM, Andre Jute wrote:
On Friday, November 17, 2017 at 3:04:17 PM UTC, jbeattie wrote:
On Thursday, November 16, 2017 at 9:13:13 PM UTC-8, Andre Jute wrote:
On Thursday, November 16, 2017 at 4:25:14 PM UTC, wrote:
Sounds like the Gates Drive is a solution to a problem yet to be invented!
Andre Jute
"Because we could." isn't a reason, it's an excuse

Yes, I was thinking the same thing, Andre. So why are some of the bicycle manufacturers using it? What do they gain by making this kind of bike?

Because the people in their target market already have one or more of everything else. With a new product they might catch a few fashion victims, or even many fashion victims, what Duane calls "product differentiation". Lou took one for the team here, but not everyone knows a Lou, and some aren't even smart enough to ask him.

https://www.youtube.com/watch?featur...c4&app=desktop

OTOH: https://www.youtube.com/watch?v=DWAKtYGJZSM I thought SIS was a joke and step-in pedals, too. You have to be able to separate the wheat from the chaff. Specialized produces a lot of chaff -- but some wheat, too. The problem is early adoption, and after a few product generations, you can tell what is wheat and what is chaff pretty easily. I steered away from buying a replacement Roubaix because I didn't want active suspension, but more importantly because I didn't want to buy into proprietary hub dimensions. It's the proprietary stuff that is a PITA.

-- Jay Beattie.

Not all products that survive are necessarily objectively the best. Vide successive Microsoft operating systems, which currently are crap copies of Apple OS, which in turn was a dead system (the bosses couldn't believe their techs were dumb enough to come up with a user-friendly interface that would them all out of work) which Xerox just gave to Apple. But Bill Gates had three advantages: primacy, massive early adoption because, third, Gates was a brilliant salesman who persuaded IBM to put his OS on their early PC's. Peanuts!

Nobody can accuse Lou or me of being technophobic when we turn thumbs down on a new component either by analysis or by trial. We've served our time in the trenches; check what's on my bike, then check what I've tested and thrown off as inadequate; or check the bikes in Lou's garage. The Gates belt in an automobile is a brilliant problem-solver but on a bicycle it is superfluous to requirements. Notice that the only two people who have actually given the Gates Drive lots of attention, one an engineer, one a premium goods marketer, have not volunteered an opinion on the most important aspect of a multi-million dollar investment: whether the Gates Drive will still be around in ten or twenty years. It's competently engineered, therefore it won't fall flat on its face, which in turn means that psycho-economic factors come into play, including irrationalities like whether its time has arrived as perceptively superior and therefore essential to new elite cyclists who may have an entire

ly
different outlook to those whose cycling gestalt was formed by Peugeot ten-speed racing in the 1970s.

When did you last see a shaft drive bicycle? That one failed in the market, again, recently, this time by inadequate engineering (plastic gears! -- Jesus wept). I predicted that it would happen; it was such an obvious case of the marketing department and the cost-accountants overriding the engineers, not always a bad thing for poorer consumers than the ones I generally appeal to but in this case disastrous. However, a shaft drive light enough and durable enough for bicycles isn't rocket science, so, if a shaft drive is possible, and offers all the advantages of the Gates Drive without requiring a split frame and in addition is aesthetically superior, why don't we see shaft drives buzzing around on all sides?

It is of course possible to apply all the same arguments to the Rohloff hub gearbox, which is a huge success. But, actually, that was off to a slow start, and taken up by the "wrong" market, tourers rather than the intended mud pluggers. It just so happened that the particular wrong guys the first OEM fitter of the Rohloff catered for were opinionformers, and Rohloff was up and away. It's a striking example of what I'm all always trying to explain to that bonehead Krygowski, that the interpretation of random sampling statistics is an art form, not a license to lie. In this case, cyclists, asked in advance, would probably have said overwhelmingly that the Rohloff was surplus to requirements, that derailleurs always did the job adequately, etc, all the familiar arguments. Nobody would have thought of asking Utopia's tiny market what they though: they were guys who bought V12 Mercedes, so entirely out of the target market... That's the sort of irrational chance, though entirely pre

di
ctable to those of us with the right experience and outlook, that I see for the Gates Drive. I admire the Gates management for rolling the dice and not cutting financial corners.

Andre Jute
"I'm not a fashion victim. I just pander to them." -- The late, great Rosser Reeves in private conversation (Mr Reeves was the original model for Vance Packard's meretricious The Man in the Gray Flannel Suit)


One of the best handling, elegant and well built machines I
have ever ridden was a 1913 Pope Columbia shaft drive fixed.
Hugely expensive when new but nicely done; there's no
inherent technical barrier to shaft drive.


Quite. It's just unnecessary, except perhaps in niche markets, as Jay points out.

How much was the Pope shaft drive bike when new?

Andre Jute
So much can be concluded from comparative economics


A quick search or two seems to indicate $180 when typical
annual incomes ranged $500(schoolteacher) to $600(railroad)
and the bulk of period ads show lots of name brand machines
from $15 to $30

Than again that was before the dreaded income tax...
--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


Mmm, about four months of the entire gross pay of a professional man. Even in the days before the government made itself every man's sleeping partner, that was a pretty pricey investment, say at about the level of a Porsche today for a young merchant banker who fancies himself a dashing man around town.

Thanks for that, Andrew. It kept me amused through after-dinner port (Australian Penfolds, the good stuff -- a financier chum I was advising bought a wholesaler for the property value and found a store of ancient cases at the back of the cellar below the warehouse, and I took my fee in kind).

I had an Auburn boattail that I bought for a thousand Rand (about USD2000 at the time) in Johannesburg off the lot of a back street trader on the way to an ice rink in a less salubrious part of town where my girlfriend, a champion skater, went to practice. The thing couldn't make the 100mph promised by the plaque on the dashboard (actually, what it said, was that it was tested at 100.3mph) but I only tried once, since anything over 60mph was dead frightening, it was such an incompetent automobile: zero brakes. Anyhow, this monstrous sports car about twenty years after the Pope bicycle sold new for $995 which proportionately must be around the same comparative fraction of annual income as the Pope.

Andre Jute
Relevance to the thread? Which thread?
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dakoroman Drive System Pdfx1 drumstuck Unicycling 0 July 17th 08 01:13 AM
Dakoroman Drive System Pdfx1 Into the blue Unicycling 0 June 14th 08 03:09 AM
Dakoroman Drive System Pdfx1 1-wheeled-grape Unicycling 0 June 11th 08 12:16 AM
Uni in, Tandem in ! - DAKOROMAN DRIVE SYSTEM unisk8r Unicycling 1 January 23rd 08 03:55 AM
Dakoroman Drive System-the Legend dakoroman Unicycling 13 January 14th 08 06:03 PM


All times are GMT +1. The time now is 11:35 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.