|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Where to get posidrive tip/bit set?
I didn't see any posidrive at Home Depot, and am becoming surprised
at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? |
Ads |
#2
|
|||
|
|||
Where to get posidrive tip/bit set?
On Sat, 11 Mar 2006 12:11:46 -0500, dh@. wrote:
I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? "Pozidriv" as a search term will get more hits, since that's the actual trademarked name used by the Phillips Screw Company for the product. You'll find them at most automotive tool suppliers (including quite a few auto parts stores) both by themselves and as part of various driver bit assortments. Although Home Depot does not list them on their website, the bits are present in a number of the tool sets they sell. I'm not sure that they have a bit set that's just Pozidriv, though; it's hard to say without going to a specific store because Home Depot's website does not list anything close to the same selection as their stores carry. -- Typoes are a feature, not a bug. Some gardening required to reply via email. Words processed in a facility that contains nuts. |
#3
|
|||
|
|||
Where to get posidrive tip/bit set?
I have a set of B&D bits that includes Pozidrv.
Perce On 03/11/06 12:11 pm dh@. wrote: I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? |
#4
|
|||
|
|||
Where to get posidrive tip/bit set?
dh@. wrote in message ... I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? Best source for any screws and drivers http://www.mcfeelys.com/subcat.asp?sid=491 |
#5
|
|||
|
|||
Where to get posidrive tip/bit set?
http://www.mcmaster.com/ page 2679
dh@. wrote in message ... I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? |
#6
|
|||
|
|||
Where to get posidrive tip/bit set?
Also
http://www.grainger.com/Grainger/sea...r+Bi ts&xi=xi dh@. wrote in message ... I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? |
#7
|
|||
|
|||
Where to get posidrive tip/bit set?
dh@. wrote:
I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? call Snap On, 1-800-TOOLS-4-U -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#8
|
|||
|
|||
Where to get posidrive tip/bit set?
dh@. wrote:
I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? I don't know of a single Pozidriv fastener used on bike equipment. What will you drive with it? -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#9
|
|||
|
|||
Where to get posidrive tip/bit set?
On Sat, 11 Mar 2006 12:11:46 -0500, dh@. wrote:
I didn't see any posidrive at Home Depot, Then try a tool shop instead. Or else take a Phillips bit and then grind the tip off. This isn't an accurate Pozidriv form, but it's close enough for most jobs, and most of the "pozidrive" screws (i.e. not Phillips or Reed) you encounter these days aren't true Pozidriv form anyway. Wiha or Snap-on do the best hex inserts |
#10
|
|||
|
|||
Where to get posidrive tip/bit set?
dh@. wrote in message ...
I didn't see any posidrive at Home Depot, and am becoming surprised at how little I'm finding online. So far about the best I've done is: http://www.wihatools.com/indexes/indxpozi.htm http://www2.northerntool.com/product-1/200320565.htm Does anyone know of more options? I bought a cheap set of Stanley "Fat Max" screwdrivers, 10 or so, at Wally World, and at least 2-3 of them are posidrive, 3-4 Philips and the rest flat. I have a good few British tools anyway, and there's no shortage of posidrive amongst them. I guess they're a slightly more modern design and hence generally anathema to the American outlook on things, in the main, though... |
|
Thread Tools | |
Display Modes | |
|
|