|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mysterious parts with Ultegra dual control levers
I'm installing Ultegra dual control levers on an old bike. There are two
parts in the small parts bag whose function is not obvious, and I have failed to find anything in the instructions about them. One appears to be an aluminum cable stop, something like this. The small barrel has two circumferential indentations. ----------- ------ ------ ----------- The second is an aluminum cup washer which looks like it was made to guard the edge of a hole in a part. Any help would be appreciated. Bob Wheeler --- http://www.bobwheeler.com/ ECHIP, Inc. --- Randomness comes in bunches. |
Ads |
#2
|
|||
|
|||
Mysterious parts with Ultegra dual control levers
On Mon, 09 Aug 2004 18:45:04 -0400, Bob Wheeler
wrote: I'm installing Ultegra dual control levers on an old bike. There are two parts in the small parts bag whose function is not obvious, and I have failed to find anything in the instructions about them. One appears to be an aluminum cable stop, something like this. The small barrel has two circumferential indentations. ----------- ------ ------ ----------- The second is an aluminum cup washer which looks like it was made to guard the edge of a hole in a part. Any help would be appreciated. Bob Wheeler --- http://www.bobwheeler.com/ ECHIP, Inc. --- Randomness comes in bunches. Hi, I think the first is an unnecessary cable splicing coupler, but I could be wrong. The second is meant to be used with the under bottom bracket cable guide. Life is Good! Jeff |
#3
|
|||
|
|||
Mysterious parts with Ultegra dual control levers
The first is a cable ferrule to be used on bikes requiring one on the
brazeon on the chaninstay in front of the derailleur. "Bob Wheeler" wrote in message ... I'm installing Ultegra dual control levers on an old bike. There are two parts in the small parts bag whose function is not obvious, and I have failed to find anything in the instructions about them. One appears to be an aluminum cable stop, something like this. The small barrel has two circumferential indentations. ----------- ------ ------ ----------- The second is an aluminum cup washer which looks like it was made to guard the edge of a hole in a part. Any help would be appreciated. Bob Wheeler --- http://www.bobwheeler.com/ ECHIP, Inc. --- Randomness comes in bunches. |
#4
|
|||
|
|||
Mysterious parts with Ultegra dual control levers
Bob Wheeler wrote in message ...
I'm installing Ultegra dual control levers on an old bike. There are two parts in the small parts bag whose function is not obvious, and I have failed to find anything in the instructions about them. One appears to be an aluminum cable stop, something like this. The small barrel has two circumferential indentations. ----------- ------ ------ ----------- The second is an aluminum cup washer which looks like it was made to guard the edge of a hole in a part. Any help would be appreciated. Bob Wheeler --- http://www.bobwheeler.com/ ECHIP, Inc. --- Randomness comes in bunches. Anything he http://www.shimano-europe.com/cyclin...ew/St_6500.pdf look like what you're seeing? Tom Young Random events tend to cluster. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
5 pages of new parts for sale | Marketplace | 1 | October 28th 03 01:30 AM | |
ICYCLES Inventory List | ICYCLES | Marketplace | 0 | July 26th 03 08:25 PM |