|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tom Teesdale is building tadpole framesets
I'm voluntarily cross-posting this from rec.bicycles.marketplace because
it's big news for trike fans on a budget: Tom Teesdale (a highly experienced and well respected US custom framebuilder) is now building tadpole trike framesets! He's building multiple wheel configurations, in both single and tandem styles. Prices are quite reasonable, and cheaper than the best quotes I received from Robert Stein for his wonderful trike framesets (tough choice to make). This is all I've seen so far; but prices and basic specs are included herein. Looks like Tom can provide a complete trike package for well under $2,000. I can't wait to see some photos. Place your orders now. A waiting list is sure to follow... -=B=- -------------------------------- TET Trikes Frameset- SINGLES-$1150 frame, boom, seat cover, handlebars, steering linkage, kingpins, frt hubs,chainpulley,powdercoating. all other components needed are standard bicycle components. 7/8"OD "T" on top of frt der mast for light/monitor mounts three h2o's-one under seat on main tube, two on boom socket in frt of cross arm-one above and one below flag mount on top of seat rail (r.h. for Eng, l.h. for American) threaded mounts on top of both seat rails for lights/ect. rack loop and rear fender/rack mounts stops and fittings for rear der and Sram internal Seat rails/boom length set by body measurements. a. Racer/SportRacer-similar to the glr700mm track 4130 cromoly frame with 7005 aluminum boom . Configured as a 19 x 16 wheel or 20x20 wheeled, choice of any seat angle from 19 to 45 degrees. b. Sport Touring/Touring- longer, heavier build for general riding and moderate touring 800mm track 4130 cromoly frame with 7005 aluminum boom. Configured as a 20x20 wheeled, choice of any seat angle from 25 to 45 degrees. c. Expedition/Hvy touring - build to take the loads and the miles, 800 mm track 4130 cromoly frame with 4130 boom . configured as a 20x20 wheeled, choice of any seat angle from 25 to 45 degrees. TANDEM-$2500 frameset Tandem-splits behind the captain into two sections. multiple h2o's, Both captain and stoker seat rails custom fitted to the riders. 2" x.065" main tube, 900mm track ExpTANDEM-$2600 frameset Tandem-splits behind the captain into two sections. multiple h2o's, Both captain and stoker seat rails custom fitted to the riders. 2 1/2" x.065" main tube, 900mm track, dual pannier set up Complete component packages available starting at $700. Sram internal, DaVinci drives(for tandem), Rohloff internals, and Schlumpf cranksets are available. |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about building a custom 4 wheel bike | Randal Lovelace | Recumbent Biking | 3 | October 4th 03 09:18 AM |