|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
Can anyone supply me with a part number for a replacement rubber gasket
for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. |
Ads |
#2
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
Gary Young wrote:
Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. It is, also fits Campagnolo 1030 heads. The old 323 presta only seal was (theoretically) reversible when worn. The current 323.1 has a PV end and an SV end. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#3
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
On Nov 22, 6:04*pm, Gary Young wrote:
Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. Andy Muzi is correct, here''s the correct part: http://www.biketoolsetc.com/index.cg...em_id=SI-323.1 Btw, how do you like the 40.0 pump head? I was looking at it, but heard it wasn't that good. Interestingly, Silca has supposedly "upgraded" the locking mechanism on newer and also sells it now in both aluminum and brass. Good Luck! |
#4
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
bfd wrote:
On Nov 22, 6:04 pm, Gary Young wrote: Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. Andy Muzi is correct, here''s the correct part: http://www.biketoolsetc.com/index.cg...em_id=SI-323.1 Btw, how do you like the 40.0 pump head? I was looking at it, but heard it wasn't that good. Interestingly, Silca has supposedly "upgraded" the locking mechanism on newer and also sells it now in both aluminum and brass. Good Luck! Federal law; brass alloys are highly regulated due to a minuscule lead content. New will be aluminum from here on. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#5
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
On Nov 22, 8:53*pm, AMuzi wrote:
bfd wrote: On Nov 22, 6:04 pm, Gary Young wrote: Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. Andy Muzi is correct, here''s the correct part: http://www.biketoolsetc.com/index.cg...=single&c=Tool... Btw, how do you like the 40.0 pump head? I was looking at it, but heard it wasn't that good. Interestingly, Silca has supposedly "upgraded" the locking mechanism on newer and also sells it now in both aluminum and brass. Good Luck! Federal law; brass alloys are highly regulated due to a minuscule lead content. New will be aluminum from here on. -- Thanks. Brass supposedly causes cancer and other things like brass hose nozzles are also being phased out. But how well does the Silca 40.0 pump head work? Does it work any near as well as the fancier and pricer Hirame pump head: http://www.excelsports.com/main.asp?...r=9&site=qbike Good Luck! |
#6
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
On Mon, 22 Nov 2010 20:48:45 -0800, bfd wrote:
On Nov 22, 6:04Â*pm, Gary Young wrote: Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. Andy Muzi is correct, here''s the correct part: http://www.biketoolsetc.com/index.cgi? id=617476720717&d=single&c=Tools&sc=Tire-and-Tube&tc=Pump- Parts&item_id=SI-323.1 Btw, how do you like the 40.0 pump head? I was looking at it, but heard it wasn't that good. Interestingly, Silca has supposedly "upgraded" the locking mechanism on newer and also sells it now in both aluminum and brass. Good Luck! I like it OK. My push-on Silca head would sometimes leak if the tubing flopped it over to one side. I'd be curious to see how Silca improved the locking mechanism -- I have one of the old ones, and the locking lever has 180 degrees of motion, when all you really need (or want) is 90 degrees. They should also add a pressure-release valve to make it easier to remove from the stem. I still sometimes lust after a hirame pump head, but for the price, the silca 40.0 is an acceptable substitute. |
#7
|
|||
|
|||
which gasket for Silca 40.0 locking pump head
bfd wrote:
On Nov 22, 8:53 pm, AMuzi wrote: bfd wrote: On Nov 22, 6:04 pm, Gary Young wrote: Can anyone supply me with a part number for a replacement rubber gasket for the 40.0 locking pump head? The Silca site says that it's part # 323.1, but that doesn't seem right since that's a gasket for a reversable pump and the 40.0 head is presta only. Andy Muzi is correct, here''s the correct part: http://www.biketoolsetc.com/index.cg...=single&c=Tool... Btw, how do you like the 40.0 pump head? I was looking at it, but heard it wasn't that good. Interestingly, Silca has supposedly "upgraded" the locking mechanism on newer and also sells it now in both aluminum and brass. Good Luck! Federal law; brass alloys are highly regulated due to a minuscule lead content. New will be aluminum from here on. -- Thanks. Brass supposedly causes cancer and other things like brass hose nozzles are also being phased out. But how well does the Silca 40.0 pump head work? Does it work any near as well as the fancier and pricer Hirame pump head: http://www.excelsports.com/main.asp?...r=9&site=qbike Good Luck! Sheesh. And we get bitching over 95 cents for a valve adapter. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Silca 2-Step Mini-pump ? | RS | Techniques | 19 | July 19th 08 03:05 PM |
FA: Silca Pista Pump, New! | Dan H[_38_] | Marketplace | 0 | August 26th 07 05:58 AM |
Help - Floor pump leather gasket finally gave out | kwalters | Techniques | 6 | June 22nd 06 04:52 AM |
Silca pump problem | Derek | Techniques | 6 | August 17th 05 03:42 PM |
WTB: Silca frame pump vintage | John A. \(change to reply\) | Marketplace | 0 | December 30th 04 03:41 AM |