A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Homemade U-lock rack support



 
 
Thread Tools Display Modes
  #1  
Old August 13th 18, 04:03 PM posted to rec.bicycles.tech
Tanguy Ortolo
external usenet poster
 
Posts: 71
Default Homemade U-lock rack support

Hello all,

A couple of months ago, I wrote a message about making a very simple
U-lock support on the rack, but without the pictures, it was quite
useless. I eventually remembered about this, so here is one:
https://tanguy.ortolo.eu/tmp/rack+u-lock.jpg.

U-lock usually come with a support to be mounted somewhere on the
bicycle frame. Most of these supports, however, will not withstand the
torque from the lock weight, and will break after a couple of years. You
are then left with a lock with no support.

Well, here is a homemade support that uses the rack, with many
advantages:
- it uses very simple material: a PVC tube and some tape;
- it takes 10 minutes to make;
- it does not have to withstand any significant torque and should
therefore last many years;
- it is easy to use: open the lock, raise the rack clamp, insert the
lock into the tube, then close it;
- it can stabilize some of the rack load you put over it!

There are a few drawbacks, of course:
- it is incompatible with panniers (you have to put the lock somewhere
else, though you can keep the support where it is);
- it is not exactly beautiful, due to using some tape to hold it;
- you have to remove the load from the rack to free the lock (but when
you are locking your bicycle, you usually do not want to leave your
load on your rack for people to steal it).

Just to explain, the tape in this support is just here to keep it in
place, and it will not withstand any significant constraint. The lock
weight is directly transmitted to the rack, on four stable points. Not
all racks can be equiped this way though.

--
Tanguy
Ads
  #2  
Old August 13th 18, 04:11 PM posted to rec.bicycles.tech
Frank Krygowski[_4_]
external usenet poster
 
Posts: 10,538
Default Homemade U-lock rack support

On 8/13/2018 11:03 AM, Tanguy Ortolo wrote:
Hello all,

A couple of months ago, I wrote a message about making a very simple
U-lock support on the rack, but without the pictures, it was quite
useless. I eventually remembered about this, so here is one:
https://tanguy.ortolo.eu/tmp/rack+u-lock.jpg.

U-lock usually come with a support to be mounted somewhere on the
bicycle frame. Most of these supports, however, will not withstand the
torque from the lock weight, and will break after a couple of years. You
are then left with a lock with no support.

Well, here is a homemade support that uses the rack, with many
advantages:
- it uses very simple material: a PVC tube and some tape;
- it takes 10 minutes to make;
- it does not have to withstand any significant torque and should
therefore last many years;
- it is easy to use: open the lock, raise the rack clamp, insert the
lock into the tube, then close it;
- it can stabilize some of the rack load you put over it!

There are a few drawbacks, of course:
- it is incompatible with panniers (you have to put the lock somewhere
else, though you can keep the support where it is);
- it is not exactly beautiful, due to using some tape to hold it;
- you have to remove the load from the rack to free the lock (but when
you are locking your bicycle, you usually do not want to leave your
load on your rack for people to steal it).

Just to explain, the tape in this support is just here to keep it in
place, and it will not withstand any significant constraint. The lock
weight is directly transmitted to the rack, on four stable points. Not
all racks can be equiped this way though.


Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.


--
- Frank Krygowski
  #3  
Old August 13th 18, 04:27 PM posted to rec.bicycles.tech
Tanguy Ortolo
external usenet poster
 
Posts: 71
Default Homemade U-lock rack support

Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.


Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.

--
Tanguy
  #4  
Old August 13th 18, 06:29 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Homemade U-lock rack support

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.


Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.


Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.

--
Regards, Joerg

http://www.analogconsultants.com/
  #5  
Old August 13th 18, 07:34 PM posted to rec.bicycles.tech
Jeff Liebermann
external usenet poster
 
Posts: 4,018
Default Homemade U-lock rack support

On Mon, 13 Aug 2018 10:29:44 -0700, Joerg
wrote:

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.


Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.


Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.


You can buy UV resistant zip ties. They're loaded with carbon black
that blocks UV. However, not all such zip ties are equally resistant
to UV. Some of the cheap junk has much less than the recommended 2%
carbon black. After having an antenna installation fall apart in
about a year due to crumbling zip ties, I bought some that are genuine
Polyamide 6.6 UV resistant per ASTM D-4066PA411. No problems so far
after about 5 years:
https://www.hellermanntyton.us/bundling-securing/cable-ties/standard-cable-ties-special-materials/
https://www.hellermanntyton.us/resources/materials
https://www.solarpowerworldonline.com/2016/03/not-all-uv-rated-cable-ties-have-long-lifespans-on-solar-projects/

--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
  #6  
Old August 13th 18, 08:01 PM posted to rec.bicycles.tech
Tosspot[_3_]
external usenet poster
 
Posts: 1,563
Default Homemade U-lock rack support

On 08/13/2018 05:03 PM, Tanguy Ortolo wrote:
Hello all,

A couple of months ago, I wrote a message about making a very simple
U-lock support on the rack, but without the pictures, it was quite
useless. I eventually remembered about this, so here is one:
https://tanguy.ortolo.eu/tmp/rack+u-lock.jpg.


snip

I've been very happy with these;

https://www.amazon.com/Abus-EaZy-Bra.../dp/B003F88PY2

For all my bikes. Be careful to measure the D-lock diameter correctly
though.

  #7  
Old August 13th 18, 08:13 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Homemade U-lock rack support

On 2018-08-13 11:34, Jeff Liebermann wrote:
On Mon, 13 Aug 2018 10:29:44 -0700, Joerg
wrote:

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.

Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.


Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.


You can buy UV resistant zip ties. They're loaded with carbon black
that blocks UV. However, not all such zip ties are equally resistant
to UV. Some of the cheap junk has much less than the recommended 2%
carbon black. After having an antenna installation fall apart in
about a year due to crumbling zip ties, I bought some that are genuine
Polyamide 6.6 UV resistant per ASTM D-4066PA411. No problems so far
after about 5 years:
https://www.hellermanntyton.us/bundling-securing/cable-ties/standard-cable-ties-special-materials/
https://www.hellermanntyton.us/resources/materials
https://www.solarpowerworldonline.com/2016/03/not-all-uv-rated-cable-ties-have-long-lifespans-on-solar-projects/


The one that popped was the stock tie from a high-Dollar Specialized
MTB. I can't imagine them being cheap on zip ties. Metal is generally
better.

--
Regards, Joerg

http://www.analogconsultants.com/
  #8  
Old August 13th 18, 09:12 PM posted to rec.bicycles.tech
Frank Krygowski[_2_]
external usenet poster
 
Posts: 7,511
Default Homemade U-lock rack support

On Monday, August 13, 2018 at 3:13:06 PM UTC-4, Joerg wrote:
On 2018-08-13 11:34, Jeff Liebermann wrote:
On Mon, 13 Aug 2018 10:29:44 -0700, Joerg
wrote:

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.

Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.


Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.


You can buy UV resistant zip ties. They're loaded with carbon black
that blocks UV. However, not all such zip ties are equally resistant
to UV. Some of the cheap junk has much less than the recommended 2%
carbon black. After having an antenna installation fall apart in
about a year due to crumbling zip ties, I bought some that are genuine
Polyamide 6.6 UV resistant per ASTM D-4066PA411. No problems so far
after about 5 years:
https://www.hellermanntyton.us/bundling-securing/cable-ties/standard-cable-ties-special-materials/
https://www.hellermanntyton.us/resources/materials
https://www.solarpowerworldonline.com/2016/03/not-all-uv-rated-cable-ties-have-long-lifespans-on-solar-projects/


The one that popped was the stock tie from a high-Dollar Specialized
MTB. I can't imagine them being cheap on zip ties. Metal is generally
better.


When I wrote my post above, I considered ending with "Of course, Joerg would use
hose clamps." Now I'm sorry I resisted that impulse.

- Frank Krygowski
  #9  
Old August 13th 18, 09:39 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Homemade U-lock rack support

On 2018-08-13 13:12, Frank Krygowski wrote:
On Monday, August 13, 2018 at 3:13:06 PM UTC-4, Joerg wrote:
On 2018-08-13 11:34, Jeff Liebermann wrote:
On Mon, 13 Aug 2018 10:29:44 -0700, Joerg
wrote:

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.

Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.

Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.

You can buy UV resistant zip ties. They're loaded with carbon black
that blocks UV. However, not all such zip ties are equally resistant
to UV. Some of the cheap junk has much less than the recommended 2%
carbon black. After having an antenna installation fall apart in
about a year due to crumbling zip ties, I bought some that are genuine
Polyamide 6.6 UV resistant per ASTM D-4066PA411. No problems so far
after about 5 years:
https://www.hellermanntyton.us/bundling-securing/cable-ties/standard-cable-ties-special-materials/
https://www.hellermanntyton.us/resources/materials
https://www.solarpowerworldonline.com/2016/03/not-all-uv-rated-cable-ties-have-long-lifespans-on-solar-projects/


The one that popped was the stock tie from a high-Dollar Specialized
MTB. I can't imagine them being cheap on zip ties. Metal is generally
better.


When I wrote my post above, I considered ending with "Of course, Joerg would use
hose clamps." Now I'm sorry I resisted that impulse.


No hose clamps, wire :-)

a. Costs less that a cable tie.
b. Lasts almost forever. Well, at least longer than you and I will.
c. Much less visible.
d. Leaving the ends longer can provide extra wire for stranded cyclists.

This method also works well for rear lights where the majority of the
bike parts industry seems unable to devise a holding mechanism that
actually ... holds.

BTW, the hose clamp on my road bike head set has now provided thousands
of miles of trouble-free service. It simply works. Despite some bad
weather riding it looks like on day one.

http://www.analogconsultants.com/ng/bike/Hoseclamp.JPG

--
Regards, Joerg

http://www.analogconsultants.com/
  #10  
Old August 13th 18, 10:46 PM posted to rec.bicycles.tech
Jeff Liebermann
external usenet poster
 
Posts: 4,018
Default Homemade U-lock rack support

On Mon, 13 Aug 2018 12:13:05 -0700, Joerg
wrote:

On 2018-08-13 11:34, Jeff Liebermann wrote:
On Mon, 13 Aug 2018 10:29:44 -0700, Joerg
wrote:

On 2018-08-13 08:27, Tanguy Ortolo wrote:
Frank Krygowski, 2018-08-13 17:11+0200:
Nice. If the appearance was bothersome, you could use a black tube held
in place with black zip ties.

Black tube, yes, if I can find some, but I only ever saw white tube in
hardware stores. Black zip ties, no, bad idea, as they let the tube
slide on the sides. I would rather use some black tape.


Zip ties are also bad in terms of reliability. It seems UV rays
embrittle them and then they just fall off. A while ago I chased and
stopped an MTB rider whose rear brake hose had come loose because of
that and was chafing on the rear wheel. Luckily I always have a snippet
of wire in my tool kit. Zip ties, too, but those only for temporary fixes.


You can buy UV resistant zip ties. They're loaded with carbon black
that blocks UV. However, not all such zip ties are equally resistant
to UV. Some of the cheap junk has much less than the recommended 2%
carbon black. After having an antenna installation fall apart in
about a year due to crumbling zip ties, I bought some that are genuine
Polyamide 6.6 UV resistant per ASTM D-4066PA411. No problems so far
after about 5 years:
https://www.hellermanntyton.us/bundling-securing/cable-ties/standard-cable-ties-special-materials/
https://www.hellermanntyton.us/resources/materials
https://www.solarpowerworldonline.com/2016/03/not-all-uv-rated-cable-ties-have-long-lifespans-on-solar-projects/


The one that popped was the stock tie from a high-Dollar Specialized
MTB. I can't imagine them being cheap on zip ties. Metal is generally
better.


I can believe it, if the big $$$$ specialized MTB builder trusted the
data sheets without testing. I had the same problem. The junk I
bought at the local hardware store said "UV resistant" on the package,
but wasn't. In order to test, polyamide (nylon) 6.6 should dissolve
in sulfuric acid. (I haven't tried this). The residue should be
mostly carbon black. By weighing everything, you can get a rough
guess for how much carbon black was used.
https://www.researchgate.net/post/What_is_the_solvent_to_solubilize_the_Polyamideexp ect_HFIP
Or, pay the price and use a proper tester:
http://www.testing-instruments.com/carbon-black-content-apparatus/



--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Carrying U-lock and cable on rack Dan O Techniques 10 October 7th 09 09:57 AM
Cable lock your only option with this rack? landotter Techniques 24 December 16th 08 05:34 PM
securing bike lock to frame or pannier rack Penny Techniques 10 October 1st 08 10:31 PM
will my mountain bike support a rear rack? [email protected] Techniques 2 May 20th 08 09:53 PM
Rear rack which holds U-Lock? Gooserider General 10 June 30th 04 12:02 AM


All times are GMT +1. The time now is 04:48 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.