|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Schram cassettes
I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better?
Deacon mark |
Ads |
#2
|
|||
|
|||
Schram cassettes
On 5/11/2021 1:18 PM, Mark cleary wrote:
I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#3
|
|||
|
|||
Schram cassettes
On Tuesday, May 11, 2021 at 11:18:49 AM UTC-7, Mark cleary wrote:
I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark I don't think you could detect any performance difference on a standard range road cassette, although there may be wear differences. I don't get good wear out of SRAAM chains. However, I've used SRAAM and Shimano road cassettes interchangeably and now buy whatever is cheapest, which tends to be Shimano for some reason. -- Jay Beattie. |
#4
|
|||
|
|||
Schram cassettes
On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote:
On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? |
#5
|
|||
|
|||
Schram cassettes
On 5/11/2021 5:42 PM, Tom Kunich wrote:
On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#6
|
|||
|
|||
Schram cassettes
On Tuesday, May 11, 2021 at 4:10:48 PM UTC-7, AMuzi wrote:
On 5/11/2021 5:42 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. So Shimano has different spacing between the cogs of the 8's 9's and 10's? Campy is all the same from 8 to 10. |
#7
|
|||
|
|||
Schram cassettes
On 5/13/2021 5:41 PM, Tom Kunich wrote:
On Tuesday, May 11, 2021 at 4:10:48 PM UTC-7, AMuzi wrote: On 5/11/2021 5:42 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. So Shimano has different spacing between the cogs of the 8's 9's and 10's? Campy is all the same from 8 to 10. AFAIK all Shimano, SRAM and Campagnolo cassettes are evenly spaced. That is to say the distance between an 11 and a 12 is the same space as between a 28 and a 32 on the same cassette. A Shimano 8 cassette will not shift properly in a Campagnolo 8 system. Ditto for different brands of Ten cassette. But with nine speed, one might drop any wheel into any bike with any gear system and all nines work just fine. As you note this is _not_ to say mix levers with changers. That is one hot mess. But as far as cassette spacing goes (and no further than that) nines are just nines. Everything else is all over hell. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#8
|
|||
|
|||
Schram cassettes
On 5/13/2021 6:11 PM, AMuzi wrote:
On 5/13/2021 5:41 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 4:10:48 PM UTC-7, AMuzi wrote: On 5/11/2021 5:42 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. So Shimano has different spacing between the cogs of the 8's 9's and 10's? Campy is all the same from 8 to 10. AFAIK all Shimano, SRAM and Campagnolo cassettes are evenly spaced. That is to say the distance between an 11 and a 12 is the same space as between a 28 and a 32 on the same cassette. I don't think that's exactly true, at least not for Campy 10s, see the link below. Though maybe the different-width spacers combine with shaped cogs to result in equal spacing between the cogs at the outer edge / teeth. http://www.rumplefyke.com/downloads/centaursp.jpg (First example I could find, but I've got the same image downloaded direct from campagnolo.com) Had to use that diagram after I cleaned a loose Campy cassette and realized belatedly that the spacers were not all the same as I fished them out of solvent. They do, IIRC, have identifying marks distinguishing them. I think the 9sp Campys had all spacers the same, though. Mark J. |
#9
|
|||
|
|||
Schram cassettes
On 5/13/2021 10:22 PM, Mark J. wrote:
On 5/13/2021 6:11 PM, AMuzi wrote: On 5/13/2021 5:41 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 4:10:48 PM UTC-7, AMuzi wrote: On 5/11/2021 5:42 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. So Shimano has different spacing between the cogs of the 8's 9's and 10's? Campy is all the same from 8 to 10. AFAIK all Shimano, SRAM and Campagnolo cassettes are evenly spaced. That is to say the distance between an 11 and a 12 is the same space as between a 28 and a 32 on the same cassette. I don't think that's exactly true, at least not for Campy 10s, see the link below. Though maybe the different-width spacers combine with shaped cogs to result in equal spacing between the cogs at the outer edge / teeth. http://www.rumplefyke.com/downloads/centaursp.jpg (First example I could find, but I've got the same image downloaded direct from campagnolo.com) Had to use that diagram after I cleaned a loose Campy cassette and realized belatedly that the spacers were not all the same as I fished them out of solvent. They do, IIRC, have identifying marks distinguishing them. I think the 9sp Campys had all spacers the same, though. Mark J. Yes sprocket thickness and shape requires different spacers to attain even sprocket spacing in Campagnolo Ten cassettes. BTW an elegant design, in that the low gear overhangs the base of the cassette body. Clever! -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#10
|
|||
|
|||
Schram cassettes
On Thursday, May 13, 2021 at 8:22:11 PM UTC-7, Mark J. wrote:
On 5/13/2021 6:11 PM, AMuzi wrote: On 5/13/2021 5:41 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 4:10:48 PM UTC-7, AMuzi wrote: On 5/11/2021 5:42 PM, Tom Kunich wrote: On Tuesday, May 11, 2021 at 12:23:39 PM UTC-7, AMuzi wrote: On 5/11/2021 1:18 PM, Mark cleary wrote: I have never been a Schram person also Shimano. I notice that Schram 11 speed cassettes are cheaper and more easily had these days. I have always used a full shimano drivetrain and shifting for me has always been good. My question is if a schram cassette 11 sp. shifts as well as the Shimano cassette on an all shimano drivetrain. I realize they are compatible but is there any downside on the performance?/ I am not worried about price if peformance is better on Shimano I will gladly pay. My instincts tell me a all Shimano will be that much better? Deacon mark Fits and shifts the same. Ditto SunRace, IRD and S-Ride. Suntour ROC seem to be scarce or gone but they were also fine at a great price last year. Note fancy carriers, rivetted carrier assemblies, one-piece-milled aluminum designs etc may be lighter but won't shift any differently when new. Although expensive, aluminum sprockets wear faster. Maybe it was back at 8 and 9 speeds but isn't the spacing of SRAM cassettes spaced "progressively"? Suntour was spaced that way. For 8, 10 11, 12 Campagnolo is spaced differently from Shimnao/SRAM/SunRace etc. Oddly nines are just nines- either cassette format works well in both systems. So Shimano has different spacing between the cogs of the 8's 9's and 10's? Campy is all the same from 8 to 10. AFAIK all Shimano, SRAM and Campagnolo cassettes are evenly spaced. That is to say the distance between an 11 and a 12 is the same space as between a 28 and a 32 on the same cassette. I don't think that's exactly true, at least not for Campy 10s, see the link below. Though maybe the different-width spacers combine with shaped cogs to result in equal spacing between the cogs at the outer edge / teeth. http://www.rumplefyke.com/downloads/centaursp.jpg (First example I could find, but I've got the same image downloaded direct from campagnolo.com) Had to use that diagram after I cleaned a loose Campy cassette and realized belatedly that the spacers were not all the same as I fished them out of solvent. They do, IIRC, have identifying marks distinguishing them. I think the 9sp Campys had all spacers the same, though. Mark, that is an extremely interesting piece of informaton. Those spacers all look alike and they all appear to be the same thickness. But some of the cassettes I put together do not shift very well. I guess I now have to use a vernier to put them together. Thanks for that information. I do not think that the spacing between gears is different, the thickness of the cogs are probably variable. Ahh, the beautiful days of the 9 speeds. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cassettes | [email protected] | Techniques | 16 | August 24th 17 09:34 PM |
Shimano cassettes | Neal | Techniques | 3 | September 16th 07 02:32 PM |
10sp cassettes | David M | Australia | 4 | September 29th 05 04:52 AM |
Shimano Cassettes | Mathias Koerber | Techniques | 10 | March 28th 05 03:47 AM |
Schram at it again | Claire Petersky | General | 45 | August 14th 03 05:16 PM |