|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
STI shifter problem
On Mon, 20 Nov 2006 21:17:40 GMT, "jj1075" wrote:
Qui si parla Campagnolo wrote: Common failure mode of 9s STI, both ultegra and DA...replace..may want to look at Campag, and no more busted, throw away lever problems. What would one need to do to use Campagnolo shifters in the place of Ultegra 9s STI? Is there a web site that tells all the compatabilities/incompatabilities between the two groups? I know alot of parts are interchangable from what I've read in here-I just can't keep it all straight. My Ultegra 9s are starting to feel loose and have many more rattles in the last couple thousand miles than previous. It'd be great to replace 'em when they finally give out with something repairable without dropping green on a whole new groupset. http://www.ctc.org.uk/DesktopDefault.aspx?TabID=3946 Using Campy 10s with the Hubbub connection at the rear der works perfectly. Perfectly. Ron |
Ads |
#12
|
|||
|
|||
STI shifter problem
Common failure mode of 9s STI, both ultegra and DA...replace..may want to look at Campag, and no more busted, throw away lever problems. ------- Is there a campag triple shifter that will work with Shimano triple ring and front der? |
#13
|
|||
|
|||
STI shifter problem
Callistus Valerius wrote: Common failure mode of 9s STI, both ultegra and DA...replace..may want to look at Campag, and no more busted, throw away lever problems. ------- Is there a campag triple shifter that will work with Shimano triple ring and front der? Any left ERGO, 2006 and earlier, will work great with shimano crank/FD, double or triple. 2007 Record and Chorus as well. Centaur and below lefts for 2007 have become 'indexed' and don't even work well with Campag FDs. |
#14
|
|||
|
|||
STI shifter problem
Qui si parla Campagnolo wrote:
Any left ERGO, 2006 and earlier, will work great with shimano crank/FD, double or triple. 2007 Record and Chorus as well. Centaur and below lefts for 2007 have become 'indexed' and don't even work well with Campag FDs. So, if I get that right, they threw away the major advantage of having ERGO over STI in these gruppo's? well, we can always go back to shimano front derailleur friction shifting, I guess... |
#15
|
|||
|
|||
STI shifter problem
|
#17
|
|||
|
|||
STI shifter problem
On 22 Nov 2006 05:28:04 -0800, "Qui si parla Campagnolo"
wrote: Callistus Valerius wrote: Common failure mode of 9s STI, both ultegra and DA...replace..may want to look at Campag, and no more busted, throw away lever problems. ------- Is there a campag triple shifter that will work with Shimano triple ring and front der? Any left ERGO, 2006 and earlier, will work great with shimano crank/FD, double or triple. 2007 Record and Chorus as well. Centaur and below lefts for 2007 have become 'indexed' and don't even work well with Campag FDs. What denotes a pre 2007 ERGO from a 2007 ERGO? Doug B. |
#18
|
|||
|
|||
STI shifter problem
Doug B. wrote: On 22 Nov 2006 05:28:04 -0800, "Qui si parla Campagnolo" wrote: Callistus Valerius wrote: Common failure mode of 9s STI, both ultegra and DA...replace..may want to look at Campag, and no more busted, throw away lever problems. ------- Is there a campag triple shifter that will work with Shimano triple ring and front der? Any left ERGO, 2006 and earlier, will work great with shimano crank/FD, double or triple. 2007 Record and Chorus as well. Centaur and below lefts for 2007 have become 'indexed' and don't even work well with Campag FDs. What denotes a pre 2007 ERGO from a 2007 ERGO? 2007 Record and Chorus didn't change...Centaur and below are the same as Xenon in design, a step backward, IMO. Take the back cap off and it will become obvious. Centaur for 2007 has carbon brake blades, Veloce for 2007 has a hole in the shift lever. Doug B. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Campy shifter problem | [email protected] | Techniques | 2 | June 16th 06 08:44 PM |
Front campy shifter problem | andy | Techniques | 2 | November 19th 05 01:44 PM |
Bar end shifter problem | Ted Bennett | Techniques | 4 | September 6th 05 03:48 AM |
Shimano bar end shifter problem | Floyd Sense | Techniques | 15 | May 12th 05 05:26 PM |
Cant get to 7th gear, but its a shifter problem. | xrogers | Techniques | 7 | September 27th 03 11:08 PM |