A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Marketplace
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Colnago C-40/steel fork



 
 
Thread Tools Display Modes
  #1  
Old December 5th 04, 02:49 PM
Qui si parla Campagnolo
external usenet poster
 
Posts: n/a
Default Colnago C-40/steel fork

nhell asks- Is it possible to put a classic Colnago curved steel fork on a
C-40 frame and
what would I need to do? Thanks. BRBR

I answer-sure-just need a 1 inch threaded HS, and need to have the fork steerer
be the headtube of the frameset + the stack of the headset...in length.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
Ads
  #2  
Old December 5th 04, 07:44 PM
Tom Kunich
external usenet poster
 
Posts: n/a
Default

"Qui si parla Campagnolo " wrote in message
...
nhell asks- Is it possible to put a classic Colnago curved steel fork on
a
C-40 frame and
what would I need to do? Thanks. BRBR

I answer-sure-just need a 1 inch threaded HS, and need to have the fork
steerer
be the headtube of the frameset + the stack of the headset...in length.


I would recommend against it though. The 'classic' Colnago fork is VERY
stiff and all of the road irregularities are transferred directly into the
frame since the fork won't flex. This might not bother the smaller frame
sizes but in the larger sizes you'll find the bike wandering all over the
place and even getting speed wobbles from the frame flex.

If you want to really improve your 58 cm or larger older Colnago put on a
carbon fork. It will remake it from an OK ride into one of the best.


  #3  
Old December 6th 04, 02:20 PM
Qui si parla Campagnolo
external usenet poster
 
Posts: n/a
Default

Tom- I would recommend against it though. The 'classic' Colnago fork is VERY
stiff and all of the road irregularities are transferred directly into the
frame since the fork won't flex. This might not bother the smaller frame
sizes but in the larger sizes you'll find the bike wandering all over the
place and even getting speed wobbles from the frame flex.

If you want to really improve your 58 cm or larger older Colnago put on a
carbon fork. It will remake it from an OK ride into one of the best. BRBR


I say-sorry, don't agree. I had a Colnago straight bladed fork on a steel
frame(58cm) for years and it rides like a 'fork'. To imply that stiffness when
mated to a carbon frame will make for a harsh ride or create speed wobbles is a
stretch at best. The main and sometimes ONLY advantage to a carbon fork is that
it weighs less, when compared to a well made steel fork, which the Colnago one
certainly is.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 Mike Iglesias General 4 October 29th 04 07:11 AM
FS: Old Bontrager Switchblades MTB fork Bikefixr Marketplace 2 October 20th 04 03:49 AM
FS: 55cm Colnago Super frame and fork Frank Marketplace 0 October 1st 04 06:34 AM
Columbus Muscle fork: Feedback Please Rik O'Shea Techniques 12 December 28th 03 04:32 AM
Colnago Precisa Steel Fork advice Bruce Gilbert Techniques 0 September 7th 03 01:19 PM


All times are GMT +1. The time now is 10:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.