A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Bad rear derailleur???



 
 
Thread Tools Display Modes
  #1  
Old August 11th 19, 09:22 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 2,041
Default Bad rear derailleur???

Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel.. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette. Make it my second mountain climbing bike. But its a heavy steel frame...
Ads
  #2  
Old August 11th 19, 10:40 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 2,041
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 3:22:40 PM UTC-5, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom.. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette. Make it my second mountain climbing bike. But its a heavy steel frame...



Did some work on the bike. Took the cable, chain, rear derailleur off. The bottom spring in the rear derailleur that pulls the pulley cage backwards to take up chain slack, is bad. Spring does not pull back much at all. No tension, resistance on the pulley cage. Pulley cage does not snap back. I cannot see any way to get access to this spring for replacement. Or repair if its even possible to repair springs? So it looks like a new rear derailleur is needed.

Mountain or road? Shimano of course. But are mountain derailleurs better at resisting dust infiltration and not working? 10 speed. Are road 10 STI and mountain 10 speed rear derailleurs compatible? I know Shimano stopped making road and mountain work together some time in the past.

Short again, or go up to medium/long to get more capacity if I ever expand gearing?
  #3  
Old August 11th 19, 11:32 PM posted to rec.bicycles.tech
Sir Ridesalot
external usenet poster
 
Posts: 5,270
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 5:40:06 PM UTC-4, wrote:
On Sunday, August 11, 2019 at 3:22:40 PM UTC-5, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette.. Make it my second mountain climbing bike. But its a heavy steel frame....



Did some work on the bike. Took the cable, chain, rear derailleur off. The bottom spring in the rear derailleur that pulls the pulley cage backwards to take up chain slack, is bad. Spring does not pull back much at all. No tension, resistance on the pulley cage. Pulley cage does not snap back.. I cannot see any way to get access to this spring for replacement. Or repair if its even possible to repair springs? So it looks like a new rear derailleur is needed.

Mountain or road? Shimano of course. But are mountain derailleurs better at resisting dust infiltration and not working? 10 speed. Are road 10 STI and mountain 10 speed rear derailleurs compatible? I know Shimano stopped making road and mountain work together some time in the past.

Short again, or go up to medium/long to get more capacity if I ever expand gearing?


On some rear derailleurs there's a bolt that you can undo and remove that will then allow you to wind up the rear cage another turn thereby putting more tension on the spring. Once you wind up the cage you hold it in position and reinsert the holding bolt. I've done that with a few rear derailleurs. An image of the backside of your derailleur would be a real help.

Here are some examples. The bolt I'm talking about is:

Part #7 in this diagram.

http://www.disraeligears.co.uk/Site/...-_image_1.html

Part #9 on this diagram.

https://cdn.shoplightspeed.com/shops...plate-axle.jpg

Part #2 on this diagram.

https://www.thebikefactory.co.uk/con...type_85610.jpg

Good luck and cheers
  #4  
Old August 12th 19, 01:38 AM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 2,041
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 5:32:33 PM UTC-5, Sir Ridesalot wrote:
On Sunday, August 11, 2019 at 5:40:06 PM UTC-4, wrote:
On Sunday, August 11, 2019 at 3:22:40 PM UTC-5, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline.. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette. Make it my second mountain climbing bike. But its a heavy steel frame....



Did some work on the bike. Took the cable, chain, rear derailleur off. The bottom spring in the rear derailleur that pulls the pulley cage backwards to take up chain slack, is bad. Spring does not pull back much at all.. No tension, resistance on the pulley cage. Pulley cage does not snap back. I cannot see any way to get access to this spring for replacement. Or repair if its even possible to repair springs? So it looks like a new rear derailleur is needed.

Mountain or road? Shimano of course. But are mountain derailleurs better at resisting dust infiltration and not working? 10 speed. Are road 10 STI and mountain 10 speed rear derailleurs compatible? I know Shimano stopped making road and mountain work together some time in the past.

Short again, or go up to medium/long to get more capacity if I ever expand gearing?


On some rear derailleurs there's a bolt that you can undo and remove that will then allow you to wind up the rear cage another turn thereby putting more tension on the spring. Once you wind up the cage you hold it in position and reinsert the holding bolt. I've done that with a few rear derailleurs. An image of the backside of your derailleur would be a real help.

Here are some examples. The bolt I'm talking about is:

Part #7 in this diagram.

http://www.disraeligears.co.uk/Site/...-_image_1.html

Part #9 on this diagram.

https://cdn.shoplightspeed.com/shops...plate-axle.jpg

Part #2 on this diagram.

https://www.thebikefactory.co.uk/con...type_85610.jpg

Good luck and cheers


Thanks. I checked my Shimano 105 short cage rear derailleur and could not find any of the adjusting screws shown in the diagrams you posted. One of your diagrams was for Dura Ace so I thought Dura Ace, Ultegra, 105 were essentially the same. But apparently Shimano allows mechanics to work on expensive Dura Ace derailleurs but for cheap 105, no working on allowed. The only access to the wound up, enclosed spring at the bottom of the derailleur is a 2mm hole on the bottom. I stuck the 2mm Allen wrench in it and turned both directions, but the spring did not change either way. So I ordered a new medium cage 105 derailleur for $48. Hopefully it will last better if I take any more gravel rides.
  #5  
Old August 12th 19, 02:55 AM posted to rec.bicycles.tech
Sir Ridesalot
external usenet poster
 
Posts: 5,270
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 8:39:00 PM UTC-4, wrote:
On Sunday, August 11, 2019 at 5:32:33 PM UTC-5, Sir Ridesalot wrote:
On Sunday, August 11, 2019 at 5:40:06 PM UTC-4, wrote:
On Sunday, August 11, 2019 at 3:22:40 PM UTC-5, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work.. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette. Make it my second mountain climbing bike. But its a heavy steel frame...


Did some work on the bike. Took the cable, chain, rear derailleur off. The bottom spring in the rear derailleur that pulls the pulley cage backwards to take up chain slack, is bad. Spring does not pull back much at all. No tension, resistance on the pulley cage. Pulley cage does not snap back. I cannot see any way to get access to this spring for replacement. Or repair if its even possible to repair springs? So it looks like a new rear derailleur is needed.

Mountain or road? Shimano of course. But are mountain derailleurs better at resisting dust infiltration and not working? 10 speed. Are road 10 STI and mountain 10 speed rear derailleurs compatible? I know Shimano stopped making road and mountain work together some time in the past.

Short again, or go up to medium/long to get more capacity if I ever expand gearing?


On some rear derailleurs there's a bolt that you can undo and remove that will then allow you to wind up the rear cage another turn thereby putting more tension on the spring. Once you wind up the cage you hold it in position and reinsert the holding bolt. I've done that with a few rear derailleurs. An image of the backside of your derailleur would be a real help.

Here are some examples. The bolt I'm talking about is:

Part #7 in this diagram.

http://www.disraeligears.co.uk/Site/...-_image_1.html

Part #9 on this diagram.

https://cdn.shoplightspeed.com/shops...plate-axle.jpg

Part #2 on this diagram.

https://www.thebikefactory.co.uk/con...type_85610.jpg

Good luck and cheers


Thanks. I checked my Shimano 105 short cage rear derailleur and could not find any of the adjusting screws shown in the diagrams you posted. One of your diagrams was for Dura Ace so I thought Dura Ace, Ultegra, 105 were essentially the same. But apparently Shimano allows mechanics to work on expensive Dura Ace derailleurs but for cheap 105, no working on allowed. The only access to the wound up, enclosed spring at the bottom of the derailleur is a 2mm hole on the bottom. I stuck the 2mm Allen wrench in it and turned both directions, but the spring did not change either way. So I ordered a new medium cage 105 derailleur for $48. Hopefully it will last better if I take any more gravel rides.


I'd be interested in seeing an image or two of the cage area of your existing rear derailleur.

Cheers
  #6  
Old August 12th 19, 03:09 AM posted to rec.bicycles.tech
Chalo
external usenet poster
 
Posts: 5,093
Default Bad rear derailleur???

Note that Shimano road and MTB 10 speed derailleurs have different pull ratios. Rear derailleurs and shifters are miscible up to 9 speed.
  #7  
Old August 12th 19, 03:15 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default Bad rear derailleur???

On 8/11/2019 3:22 PM, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette. Make it my second mountain climbing bike. But its a heavy steel frame...


Santana uses Deore XT with Ultegra levers which is an
excellent setup and they did the same in 10 and 9 speed.
(There are other formats, Saint Shadow SL Alternate Marvel
Universe etc)

That said your gear range is not excessive so you should be
OK with a GS road changer. You're about at the chain length
limit for an SS.

Get your eye behind the rear changer and see if the cage is
parallel to the chainrings. Also see if the lower pivot
spring works or is sticky. Your description indicates that
maybe the top spring works and the bottom does not maybe.
The most common cause of that is chain too short with a
mis-shift to big-big but I assume you didn't run it short.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #8  
Old August 12th 19, 08:01 PM posted to rec.bicycles.tech
Tom Kunich[_5_]
external usenet poster
 
Posts: 1,231
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 2:40:06 PM UTC-7, wrote:
On Sunday, August 11, 2019 at 3:22:40 PM UTC-5, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette.. Make it my second mountain climbing bike. But its a heavy steel frame....



Did some work on the bike. Took the cable, chain, rear derailleur off. The bottom spring in the rear derailleur that pulls the pulley cage backwards to take up chain slack, is bad. Spring does not pull back much at all. No tension, resistance on the pulley cage. Pulley cage does not snap back.. I cannot see any way to get access to this spring for replacement. Or repair if its even possible to repair springs? So it looks like a new rear derailleur is needed.

Mountain or road? Shimano of course. But are mountain derailleurs better at resisting dust infiltration and not working? 10 speed. Are road 10 STI and mountain 10 speed rear derailleurs compatible? I know Shimano stopped making road and mountain work together some time in the past.

Short again, or go up to medium/long to get more capacity if I ever expand gearing?


You may want to look more closely at the derailleur. It is more likely that there is dirt or grid in the cage rotation that is overcoming the return spring.
  #9  
Old August 12th 19, 08:32 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 2,041
Default Bad rear derailleur???

On Sunday, August 11, 2019 at 9:09:23 PM UTC-5, Chalo wrote:
Note that Shimano road and MTB 10 speed derailleurs have different pull ratios. Rear derailleurs and shifters are miscible up to 9 speed.


On my touring bike I am using 10 speed Shimano 105 STI levers and Shimano Deore 9 speed rear derailleur. Shifts good. 44-33-20 chainrings, 11-32 ten speed cassette. I think with Shimano Road 10 speed, it works with road 10 rear derailleurs, and mountain 9 rear derailleurs. But no 10 road STI and 10 mountain rear derailleur. No no.

On this malfunctioning cyclo cross bike I am going read 10 speed Shimano STI levers and Shimano 105 ten speed medium cage rear derailleur. So no potential for incompatibility.
  #10  
Old August 12th 19, 08:42 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 2,041
Default Bad rear derailleur???

On Monday, August 12, 2019 at 9:15:27 AM UTC-5, AMuzi wrote:
On 8/11/2019 3:22 PM, wrote:
Did a gravel ride on Saturday morning. 43 miles total, about 30 was gravel. Lot of rough gravel, very few hard, smooth, compacted stripes on the gravel road. I'm accustomed to gravel roads having well worn tracks where the cars drive. Nope.

For the final 6 miles of pavement, the rear derailleur did not work. When shifting up and down the cassette, it did not want to find the cog and jumped around a lot. I'd click and nothing happened. I'd click again and nothing happened. I'd click again and it would sort of grind and jump around looking for a cog. So I'd have to shift a bunch to get it to settle down into one cog. It did not go thunk into the next cog when shifting the STI levers.

And when shifting down to the small ring, the chain drooped on the bottom. The spring in the rear derailleur to pull it backwards and take up the chain slack was not working correctly. It wasn't strong enough to pull backwards with enough force. Had to ride the big ring only for the final miles, with the bad between cog shifting too. I basically had a single speed.

I cleaned the bike with the garden hose afterwards thinking maybe it was just the gravel dust that ruined everything. Have not had a chance to test the shifting in the basement shop. Will also try taking the derailleur off and re-lubing everything and really cleaning everything with gasoline. And spraying lubricant into the STI levers. And oiling the cables.

Questions: Can any 10 speed Shimano rear derailleur work? Dura Ace, Ultegra, 105, Tiagra, AND all of the mountain bike rear derailleurs? Nashbar has a lot of 10 speed rear derailleurs for sale. Thinking maybe a mountain will be better than road for gravel and mud? Its a short cage rear derailleur. But I was thinking maybe going medium or long if I could. Yes, no? I've never noticed any shifting difference between derailleur lengths. Current rings are 46-36 with 12-28 cassette. But maybe I will want to go 46-33 rings (110mm bcd five arm crank) and 11-32 or 11-34 ten speed cassette.. Make it my second mountain climbing bike. But its a heavy steel frame....


Santana uses Deore XT with Ultegra levers which is an
excellent setup and they did the same in 10 and 9 speed.
(There are other formats, Saint Shadow SL Alternate Marvel
Universe etc)

That said your gear range is not excessive so you should be
OK with a GS road changer. You're about at the chain length
limit for an SS.


For future, but unlikely, gear changes, I went with a new medium cage Shimano 105 rear derailleur. I've always had the exact same perfect shifting with both short and medium and long cage rear derailleurs. So no reason to stay with short cage if there is any chance of needing more range.


Get your eye behind the rear changer and see if the cage is
parallel to the chainrings. Also see if the lower pivot
spring works or is sticky. Your description indicates that
maybe the top spring works and the bottom does not maybe.
The most common cause of that is chain too short with a
mis-shift to big-big but I assume you didn't run it short.


I did not check the rear derailleur cage alignment. But will check it with my Park tool once I get ready to put on the new Shimano 105 medium cage 10 speed rear derailleur. Its possible that was causing the mis-shifting between cogs with the STI and rear derailleur. But the bike was shifting perfectly at the beginning and middle of the ride. It was just at the end when everything fell apart. And I did not drop the bike and bend the rear derailleur hanger. I'm pretty sure its the bottom spring mounted in line with the top pulley. It just does not pull the cage backwards hard enough to take up the slack on the bottom of the chain. And the rear derailleur just is not shifting between cogs correctly. Chain is definitely not too short. And I am positive I did not shift into big-big ever. Maybe big ring and second or third biggest cog at the max. Never big-big. I think the rear derailleur just got filled up with gravel dust and the springs are not working right anymore. Unsure how to clean it too. The bottom spring is sealed up inside.



--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear derailleur help [email protected] Techniques 13 September 22nd 18 03:21 PM
Suntour rear derailleur that has no derailleur hanger Postman Delivers[_3_] Techniques 19 March 25th 12 09:47 PM
FA: SRAM X9 SHIFTERS & REAR DERAILLEUR W SHIMANO DEORE XT FRONT DERAILLEUR ottodog Marketplace 0 August 27th 06 02:45 AM
FA:05 CAMPY CAMPAGNOLO REAR 10 SPEED REAR DERAILLEUR LIKE NEW NR $.99 ottodog Marketplace 0 August 24th 06 03:50 AM
New XT Rear Derailleur Chris Nelson Techniques 3 July 14th 06 05:57 AM


All times are GMT +1. The time now is 10:31 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.