|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Chain 'slipping' - cause?
For a few months now I've found that my chain seems to slip while I'm
in a particular gear. When I say 'slip', I mean that as I'm pedalling the pedals suddenly lose resistance and seem to slip forward by a few inches. It's pretty irritating, because if I'm standing up it throws me off balance (and I'm always afraid I'm going to bash myself on the saddle). When my bike went in for its first 1,000 mile service recently I told the LBS about this and they said they'd fix it. It's not fixed, though. I noticed it again almost as soon as I got the bike back, and now it's getting worse (i.e. it happens more often). Is it obvious from my description of the symptom what the problem is, please, and what might be necessary to cure it? Wet fishes, -- ,, (**)PeeWiglet~~ / \ / \ pee AT [guessthisbit].co.uk |
Ads |
#2
|
|||
|
|||
Chain 'slipping' - cause?
"Peewiglet" wrote in message ... For a few months now I've found that my chain seems to slip while I'm in a particular gear. When I say 'slip', I mean that as I'm pedalling the pedals suddenly lose resistance and seem to slip forward by a few inches. It's pretty irritating, because if I'm standing up it throws me off balance (and I'm always afraid I'm going to bash myself on the saddle). When my bike went in for its first 1,000 mile service recently I told the LBS about this and they said they'd fix it. It's not fixed, though. I noticed it again almost as soon as I got the bike back, and now it's getting worse (i.e. it happens more often). Is it obvious from my description of the symptom what the problem is, please, and what might be necessary to cure it? Wet fishes, -- ,, (**)PeeWiglet~~ / \ / \ pee AT [guessthisbit].co.uk I'm not sure how old the chain is - tho if 1000 miles must be about 4 weeks? :-) - but doesn't sound as if it or chainring / sprockets are old enough to be particularly worn. Possibly a stiff link in the chain - you'll have to see if one looks to be set at a funny angle or use your hands and check the links... |
#3
|
|||
|
|||
Chain 'slipping' - cause?
Peewiglet wrote: For a few months now I've found that my chain seems to slip while I'm in a particular gear. When I say 'slip', I mean that as I'm pedalling the pedals suddenly lose resistance and seem to slip forward by a few inches. It's pretty irritating, because if I'm standing up it throws me off balance (and I'm always afraid I'm going to bash myself on the saddle). [De-lurk] Had a similar problem on my tandem. The cause was a very slight twist in the chain. This was cured by very carefully winding the pedals backwards and watching the chain at one point until the twist was found. Two pairs of pliers then corrected the twist. Of course, replacing the chain is an alternative cure. The bike shop suggested that the twist may have happened by powering too hard during a gear change at the front end. On a different subject, hello everyone. Been reading this group for a couple of weeks. Finally found a subject to which I can contribute! [Re-lurk... perhaps] PhilD -- |
#4
|
|||
|
|||
Chain 'slipping' - cause?
Peewiglet wrote:
For a few months now I've found that my chain seems to slip while I'm in a particular gear. When I say 'slip', I mean that as I'm pedalling the pedals suddenly lose resistance and seem to slip forward by a few inches. It's pretty irritating, because if I'm standing up it throws me off balance (and I'm always afraid I'm going to bash myself on the saddle). Does it do this primarily under heavy load? One particular front gear, one particular back gear, or one particular combination? If it's a rear gear, "one particular gear" sounds like worn teeth. Take a look at that gear - if the teeth are sharks-fin shaped, that could be the culprit. Although the conventional wisdom says that rear gears wear faster, I had chain slippage. I replaced the rear set and the chain, and found it now started slipping on the front. :-) Alternatively, if it's under really heavy load (and when you say you stand it, that suggests you do put it under heavy loads), it could be the rear gear freewheel ratchet slipping - either because it's worn, or because there's a lot of crud in there. A hefty dose of WD40 will cure it temporarily (for a couple of days, that is) but the cure is a new rear gear set. Unfortunately, particularly with the heavy load slipping, there's no really effective way to diagnose these with the bike on a stand; you can't apply big enough forces. R. |
#5
|
|||
|
|||
Chain 'slipping' - cause?
freewheel ratchet slipping.....the cure is a new
rear gear set. Unless it's a cassette, of course. Which it surely will be on a bike this new? If it really is the ratchet, it should be replaced under warrantee. But it probably won't be. |
#6
|
|||
|
|||
Chain 'slipping' - cause?
iakobski wrote:
freewheel ratchet slipping.....the cure is a new rear gear set. Unless it's a cassette, of course. Which it surely will be on a bike this new? If it really is the ratchet, it should be replaced under warrantee. But it probably won't be. As it's quite new I would think the most probable cause is a stiff chain link. -- Dave... |
#7
|
|||
|
|||
Chain 'slipping' - cause?
Yes, this sounds the most likely - apart from the "in a particular
gear" comment by the OP. It would be pretty hard, but not impossible, to wear out a chain and a sproket in 1000 miles. Is it possible the cause might be that the derailleur is slightly out of adjustment? Anyway, what do I know, my derailleur, cassette and free hub are all safely in a box where they can't get anywhere near my chain. |
#8
|
|||
|
|||
Chain 'slipping' - cause?
Many thanks to all for the help with this. I'd assumed it was probably
a simple problem and easy to diagnose, but it's clear that it could be one of a number of things. Will have to take it back to LBS and request further investigations. It only happens in one gear. I'm not sure how to describe them, but there are 3 'gears' which each have 8 sub-divisions (I know I'm not putting that right - sorry!). I always have the bike in the 'middle' gear (i.e. 2 on the left handlebar), and the slipping only occurs when I have it in the 7th sub-division on the right handlebar. I hope you can see what I mean! As for whether it only happens when I exert particular force, I think I should have been more careful in what I wrote earlier. It happens both when I'm sitting and standing - more often while I'm sitting, actually, as I'm rarely standing - but I particularly dislike it when I'm standing as I'm always afraid my sensitive bits will come down hard on the pointy bit of the saddle wince. I don't really have to be pedalling particularly hard for it to happen. A bit of further info is that when I first mentioned it at the LBS the bike was on about 800 miles, and the chappie took a look at the chain (or the cogs - something down there, anyway). He said something about a bit of wear in that particular gear, but expressed some surprise as he has the same bike and has done 3000 miles, and he's not got the same wear yet. I realise I don't know what I'm talking about here, but I hope that it might make some sense to someone out there! Anyway, he said to leave it until the bike got to 1000 miles (a few weeks later) and they'd sort it on the service. I reminded them, but it's not sorted. I thought it was for the first half an hour, but then it happened again. It now happens with increasing frequency, although it's not quite as frequent as it had become immediately pre service, by which stage it was such a nuisnance that I was virtually unable to ride in gear 2/7. Well, I hope this makes some sense and adds a bit of further context! Thanks again for your help Wet fishes, -- ,, (**)PeeWiglet~~ / \ / \ pee AT [guessthisbit].co.uk |
#9
|
|||
|
|||
Chain 'slipping' - cause?
Peewiglet wrote:
Many thanks to all for the help with this. I'd assumed it was probably a simple problem and easy to diagnose, but it's clear that it could be one of a number of things. Will have to take it back to LBS and request further investigations. It only happens in one gear. I'm not sure how to describe them, but there are 3 'gears' which each have 8 sub-divisions (I know I'm not putting that right - sorry!). I always have the bike in the 'middle' gear (i.e. 2 on the left handlebar), and the slipping only occurs when I have it in the 7th sub-division on the right handlebar. I hope you can see what I mean! As for whether it only happens when I exert particular force, I think I should have been more careful in what I wrote earlier. It happens both when I'm sitting and standing - more often while I'm sitting, actually, as I'm rarely standing - but I particularly dislike it when I'm standing as I'm always afraid my sensitive bits will come down hard on the pointy bit of the saddle wince. I don't really have to be pedalling particularly hard for it to happen. You have three chainrings at the front and eight sprockets at the back. The chainrings are controlled from the LH changer and the sprockets from the RH one. The chainrings are usually called outer middle and inner. The sprockets are called by number form the one nearest the spokes one to eight, hence one is the biggest and eight is the smallest. You say the chain is jumping in middle and seventh is that seventh or second? In any case try the chain on outer or inner on seventh to see if it jumps in that combination. If it is that particular sprocket that is causing it to jump it may be possible to replace just that sprocket (since the cassette is relatively new) or if that isn't possible a new cassette should cure it if it isn't a stiff link in the chain. But I don't think its a stiff link because it would jump in other gears if it was. -- Phil Cook looking north over the park to the "Westminster Gasworks" |
#10
|
|||
|
|||
Chain 'slipping' - cause?
On Thu, 17 Nov 2005 14:48:29 +0000, Phil Cook
wrote: Peewiglet wrote: Many thanks to all for the help with this. I'd assumed it was probably a simple problem and easy to diagnose, but it's clear that it could be one of a number of things. Will have to take it back to LBS and request further investigations. It only happens in one gear. I'm not sure how to describe them, but there are 3 'gears' which each have 8 sub-divisions (I know I'm not putting that right - sorry!). I always have the bike in the 'middle' gear (i.e. 2 on the left handlebar), and the slipping only occurs when I have it in the 7th sub-division on the right handlebar. I hope you can see what I mean! As for whether it only happens when I exert particular force, I think I should have been more careful in what I wrote earlier. It happens both when I'm sitting and standing - more often while I'm sitting, actually, as I'm rarely standing - but I particularly dislike it when I'm standing as I'm always afraid my sensitive bits will come down hard on the pointy bit of the saddle wince. I don't really have to be pedalling particularly hard for it to happen. Hi Phil, You have three chainrings at the front and eight sprockets at the back. The chainrings are controlled from the LH changer and the sprockets from the RH one. The chainrings are usually called outer middle and inner. The sprockets are called by number form the one nearest the spokes one to eight, hence one is the biggest and eight is the smallest. You say the chain is jumping in middle and seventh is that seventh or second? 7th i.e. the second hardest 'gear' on the second chainring. (7th is what it says on the handlebar gearshifter, anyway.) In any case try the chain on outer or inner on seventh to see if it jumps in that combination. Will do - thanks for the tip. Will report back If it is that particular sprocket that is causing it to jump it may be possible to replace just that sprocket (since the cassette is relatively new) or if that isn't possible a new cassette should cure it if it isn't a stiff link in the chain. But I don't think its a stiff link because it would jump in other gears if it was. If it's a sprocket problem, is that likely to be an expensive fix? Wet fishes, -- ,, (**)PeeWiglet~~ / \ / \ pee AT [guessthisbit].co.uk |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cervelo Soloist Team | psycholist | Techniques | 26 | September 5th 05 10:39 PM |
New 1/8" interlock chain - any thoughts? | [email protected] | Techniques | 27 | June 5th 05 12:35 AM |
A few fixed gear questions. | Will Fisher | Techniques | 39 | March 16th 05 04:56 PM |
Too-Wide Chain: More Likely To Break? | (Pete Cresswell) | Techniques | 12 | December 21st 03 04:51 AM |
Slipping chain... | Bob | UK | 3 | October 16th 03 11:13 AM |